Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
20-Pin Backshell MX150 Series
Available Stock
3,200
Estimated Ship Time:3-5 working days
25+
160+$1.2538
320+$1.2219
480+$1.19
- +
Ext. Price(USD):$200.60
MOQ:160
Mult:160
SPQ:160
Quadrax Series 12pin Cable Clamp, Clip Mount, Wire Mount
Pre-order
100
Factory Lead Time:22-26 weeks
1+$83.625
5+$72.9
250+$60.1625
500+$59.1625
- +
Ext. Price(USD):$83.62
MOQ:1
Mult:1
20-Pin Lock Plate, Board Mount
Available Stock
6,957
Estimated Ship Time:6-7 working days
19+
20+$0.1467
500+$0.0762
- +
Ext. Price(USD):$2.93
MOQ:20
Mult:20
Amphenol
ECAD Model:
20-Pin Shroud
Pre-order
15,000
Factory Lead Time:10-16 weeks
24+
1,500+$6.0041
1,600+$5.8474
- +
Ext. Price(USD):$9,006.15
MOQ:1,500
Mult:100
SPQ:100
Polarizing Device (Key, Plug, Post)
Available Stock
25,149
Estimated Ship Time:7-9 working days
19+
160+$0.924
360+$0.902
600+$0.891
1,200+$0.869
20,000+$0.792
- +
Ext. Price(USD):$147.84
MOQ:160
Mult:40
SPQ:40
Molex
ECAD Model:
10-Pin Retainer, Fixed Mount, 23.1mm L × 5.45mm H
Available Stock
42,760
Estimated Ship Time:6-7 working days
22+
20+$0.1088
200+$0.0412
- +
Ext. Price(USD):$2.17
MOQ:20
Mult:20
TE Connectivity Stress Relief, Metrimate Series, For Metrimate Square Plug and Socket
Available Stock
150
Estimated Ship Time:4-5 working days
150+$12.4964
300+$12.2846
600+$12.0198
- +
Ext. Price(USD):$1,874.46
MOQ:150
Mult:150
SPQ:150
Yazaki
ECAD Model:
Wire Seal with Blue
Available Stock
14,712
Estimated Ship Time:3-5 working days
25+
1+$0.0327
12,500+$0.0245
25,000+$0.0164
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:125,000
Molex
ECAD Model:
7-Pin Cable Holder, Ribbon Cables, Wire Mount, 15.5mm L × 4.5mm H
Available Stock
66,000
Estimated Ship Time:7-9 working days
19+
1,064+$0.055
12,000+$0.0528
24,000+$0.0506
60,000+$0.0495
- +
Ext. Price(USD):$58.52
MOQ:1,064
Mult:1
SPQ:1
Wire Seals
Available Stock
7,600
Estimated Ship Time:3-5 working days
26+
1+$0.0337
1,000+$0.0269
5,000+$0.0225
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:20,000
Molex
ECAD Model:
5-Pin Terminal Position Assurance (TPA), 51163 Series, 7.87mm H
Available Stock
7,382
Estimated Ship Time:3-5 working days
22+
1+$0.0717
500+$0.0635
1,000+$0.0552
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1,000
Panel Mount Frame, Panel Mount, 45.212mm (L) × 40.6mm (W)
Available Stock
2,600
Estimated Ship Time:4-6 working days
18+
50+$5.3128
- +
Ext. Price(USD):$265.64
MOQ:50
Mult:50
SPQ:50
TE Connectivity Black Fiber Filled Nylon Stress Relief Connector Cover 293729-1 for Micro Mate-N-Lock Receptacle Housing
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$0.5
1,000+$0.425
5,000+$0.4
- +
Ext. Price(USD):$300.00
MOQ:600
Mult:600
SPQ:600
31-Pin Shell, FI-R Series
Available Stock
3,245
Estimated Ship Time:4-6 working days
1+$0.1281
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Polarizing Device (Key, Plug, Post) MX150L Series Push-In, 33.97mm L × 6.1mm H
Available Stock
1,650
Estimated Ship Time:7-9 working days
25+
323+$0.363
720+$0.341
8,000+$0.2706
20,000+$0.253
- +
Ext. Price(USD):$117.24
MOQ:323
Mult:1
SPQ:1
6-Pin Wire-to-Wire Sealed, General Purpose MATE-N-LOK Series, Sealed Mount, Wire Mount
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$2.025
250,000+$1.575
- +
Ext. Price(USD):$10,125.00
MOQ:5,000
Mult:5,000
Molex
ECAD Model:
Backshell 4-Pin MX120 Series
Available Stock
22,250
Estimated Ship Time:3-5 working days
24+
250+$0.235
500+$0.2291
750+$0.2231
- +
Ext. Price(USD):$58.75
MOQ:250
Mult:250
SPQ:250
20-Pin Cap (Cover) AMPMODU Mod IV Series
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$2.4375
5,000+$2.2125
50,000+$1.85
100,000+$1.725
- +
Ext. Price(USD):$7,312.50
MOQ:3,000
Mult:3,000
16-Pin Terminal Position Assurance (TPA) Economy Power Housings, Fixed Mount, 11.35mm H
Available Stock
24,000
Estimated Ship Time:4-5 working days
6,000+$0.0593
12,000+$0.0583
24,000+$0.0571
- +
Ext. Price(USD):$355.80
MOQ:6,000
Mult:6,000
SPQ:24,000
3-Pin Wedgelock DT-XT Series Plugs, Edge Mount
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.65
3,000+$0.4875
5,000+$0.3263
10,000+$0.24
- +
Ext. Price(USD):$650.00
MOQ:1,000
Mult:1,000
SPQ:1,000
2-Pin Wedgelock DT-XT Series Plugs
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.0875
3,000+$0.0663
5,000+$0.045
10,000+$0.0313
- +
Ext. Price(USD):$87.50
MOQ:1,000
Mult:1,000
SPQ:1,000
JST
ECAD Model:
Connector Accessories Lock Screw
Available Stock
148
Estimated Ship Time:4-6 working days
26+
2+$3.1877
20+$2.6338
- +
Ext. Price(USD):$6.37
MOQ:2
Mult:2
SPQ:20
Yazaki
ECAD Model:
Wire Seal, Light Brown
Available Stock
17,690
Estimated Ship Time:4-6 working days
26+
1+$0.0134
2,000+$0.0122
10,000+$0.0116
- +
Ext. Price(USD):$0.01
MOQ:1
Mult:1
SPQ:1
Harwin
ECAD Model:
BandIT Tie M80-945/M80-946 Series
Available Stock
43
Estimated Ship Time:6-12 working days
1+$15.5029
10+$15.2261
250+$14.9493
500+$14.9493
- +
Ext. Price(USD):$31.00
MOQ:2
Mult:1
TE Connectivity DTM Tail Cap, High Protection, Allows Corrugated Tube Insertion, 180° & 90° Versions
Available Stock
9
Estimated Ship Time:5-7 working days
26+
1+$2.4868
250+$1.7352
- +
Ext. Price(USD):$2.48
MOQ:1
Mult:1
SPQ:1
25 / PageGoto