Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
11-Pin Terminal Position Assurance (TPA) Economy Power Housings
Available Stock
4,371
Estimated Ship Time:6-7 working days
19+
20+$0.1024
800+$0.0532
- +
Ext. Price(USD):$2.04
MOQ:20
Mult:20
ASC 15P SPACER
Available Stock
11,968
Estimated Ship Time:4-6 working days
1+$0.0211
5,000+$0.0194
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
8-Pin Cap (Cover) AMPMODU MT Series
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$1.1375
10,000+$1.075
25,000+$1.025
50,000+$0.95
100,000+$0.875
- +
Ext. Price(USD):$5,687.50
MOQ:5,000
Mult:5,000
Capacitor Cover, 9-Pin
Available Stock
5,656
Estimated Ship Time:7-9 working days
23+
40+$2.871
100+$2.827
200+$2.772
400+$2.717
- +
Ext. Price(USD):$114.84
MOQ:40
Mult:1
SPQ:1
Connector Housing, Sealing Seal
Available Stock
20
Estimated Ship Time:3-5 working days
17+
1+$0.099
10,000+$0.0743
20,000+$0.0496
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:20,000
6-Pin Lock Plate, Power Double Lock Series, Board Mount, 34.7mm L × 4mm H
Available Stock
38,500
Estimated Ship Time:4-5 working days
500+$0.0379
1,000+$0.0372
2,000+$0.0364
- +
Ext. Price(USD):$18.95
MOQ:500
Mult:500
SPQ:10,000
Amphenol
ECAD Model:
Gasket ARC Series 24-Pin 77.2mm L × 53.1mm H
Available Stock
436
Estimated Ship Time:6-12 working days
25+$0.9013
50+$0.8652
1,000+$0.7787
2,500+$0.7787
- +
Ext. Price(USD):$24.33
MOQ:27
Mult:1
12-Pin TPA Economy Power Housings, Fixed Mount
Available Stock
32,000
Estimated Ship Time:4-5 working days
8,000+$0.0401
16,000+$0.0394
32,000+$0.0386
- +
Ext. Price(USD):$320.80
MOQ:8,000
Mult:8,000
SPQ:32,000
24-Pin Cap (Cover) AMPMODU MT Series
Pre-order
35,000
Factory Lead Time:22-26 weeks
350+$0.3713
850+$0.365
- +
Ext. Price(USD):$129.95
MOQ:350
Mult:350
Aptiv
ECAD Model:
Lock Secondary TPA GT PPL
Available Stock
2,992
Estimated Ship Time:6-7 working days
20+$0.2512
- +
Ext. Price(USD):$5.02
MOQ:20
Mult:20
23-Pin Cap (Cover), Dust MTA-100 Series, 58.42mm L × 10.03mm H
Pre-order
8,000
Factory Lead Time:22-26 weeks
80+$0.925
300+$0.875
500+$0.6875
1,000+$0.6125
2,500+$0.5625
- +
Ext. Price(USD):$74.00
MOQ:80
Mult:80
SPQ:80
JST
ECAD Model:
Connector Accessories 3 POS 6.5mm Housing Retainer Straight Polyamide 66 Ivory Bag
Available Stock
20
Estimated Ship Time:4-6 working days
1+$0.0552
1,000+$0.0515
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1
16-Pin Holder AMPMODU MT Series, Bracket Mount, 20.25mm × 8.5mm × 6.9mm
Available Stock
9,000
Estimated Ship Time:4-5 working days
1,000+$0.1212
2,000+$0.1192
4,000+$0.1166
- +
Ext. Price(USD):$121.20
MOQ:1,000
Mult:1,000
SPQ:12,000
34-Pin Cap (Cover) AMPMODU MT Series
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$2.7
5,000+$1.9125
10,000+$1.8125
25,000+$1.725
- +
Ext. Price(USD):$6,750.00
MOQ:2,500
Mult:2,500
SPQ:2,500
Molex
ECAD Model:
9-Pin TPA Mini-Fit Sigma Series 42.8mm(L) × 10.68mm(H)
Pre-order
130,000
Factory Lead Time:22-26 weeks
1,300+$0.1325
4,000+$0.115
10,000+$0.1125
- +
Ext. Price(USD):$172.25
MOQ:1,300
Mult:1,300
Backshell
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$1,474.025
50+$1,304.4375
100+$1,095.725
250+$1,043.5625
500+$965.2875
- +
Ext. Price(USD):$36,850.62
MOQ:25
Mult:25
SPQ:25
Available Stock
1,769
Estimated Ship Time:6-7 working days
25+
20+$0.2345
600+$0.1076
- +
Ext. Price(USD):$4.69
MOQ:20
Mult:20
1806 DL 1P REARHOLDER
Available Stock
20,054
Estimated Ship Time:4-6 working days
1+$0.0094
5,000+$0.0087
- +
Ext. Price(USD):$0.01
MOQ:2
Mult:1
SPQ:1
Amphenol
ECAD Model:
26-Pin Strain Relief, Quickie™ Series
Pre-order
4,320,000
Factory Lead Time:15 weeks
8,640+$0.5763
- +
Ext. Price(USD):$4,979.23
MOQ:8,640
Mult:270
SPQ:270
TE Connectivity Connector Blind Mate, Male Terminal, MOD IV Series
Available Stock
44,263
Estimated Ship Time:7-9 working days
21+
400+$0.3047
950+$0.2992
10,000+$0.2629
25,000+$0.242
- +
Ext. Price(USD):$121.88
MOQ:400
Mult:1
SPQ:1
3-Pin Strain Relief, Universal MATE-N-LOK II Series
Available Stock
1,715
Estimated Ship Time:3-7 working days
25+
100+$0.9244
- +
Ext. Price(USD):$92.44
MOQ:100
Mult:100
SQUIB SCR Assy, 11DIA, 9.3mm TYP
Available Stock
59,581
Estimated Ship Time:7-9 working days
14+
550+$0.2024
1,400+$0.1991
2,800+$0.1947
4,000+$0.187
- +
Ext. Price(USD):$111.32
MOQ:550
Mult:1
SPQ:1
Amphenol
ECAD Model:
44-Pin Strain Relief, Quickie™ Series, 71.26mm L
Pre-order
3,240
Factory Lead Time:10-16 weeks
24+
324+$0.6796
486+$0.6619
- +
Ext. Price(USD):$220.19
MOQ:324
Mult:162
SPQ:162
12-Pin Cable Clamp, Clamp Mount, Wire Mount
Pre-order
20,000
Factory Lead Time:22-26 weeks
200+$30.95
500+$25.6875
50,000+$11.45
100,000+$10.9875
- +
Ext. Price(USD):$6,190.00
MOQ:200
Mult:200
Molex
ECAD Model:
Spring Latch Clip 70013 Series Spring Mount
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$0.4
12,000+$0.3513
30,000+$0.345
- +
Ext. Price(USD):$2,000.00
MOQ:5,000
Mult:5,000
25 / PageGoto