Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Yazaki
ECAD Model:
Connector TPA 8 Way Light Gray
Available Stock
1,980
Estimated Ship Time:6-7 working days
26+
20+$0.6251
100+$0.3047
- +
Ext. Price(USD):$12.50
MOQ:20
Mult:20
Wire Seal, Brown
Available Stock
59,098
Estimated Ship Time:3-5 working days
26+
1+$0.0541
1,000+$0.0406
5,000+$0.027
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:10,000
Available Stock
1
Estimated Ship Time:4-6 working days
1+$1.8159
500+$1.3395
1,000+$0.8555
- +
Ext. Price(USD):$1.81
MOQ:1
Mult:1
SPQ:1,000
6-Pin Stress Relief General Purpose MATE-N-LOK Series, 45.21mm L
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$1.375
25,000+$1.3125
100,000+$1.2375
- +
Ext. Price(USD):$13,750.00
MOQ:10,000
Mult:10,000
SPQ:10,000
375 1F R/H(58L)
Available Stock
18,566
Estimated Ship Time:4-6 working days
1+$0.0627
1,000+$0.057
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
14-Pin Strain Relief, 891 Series
Available Stock
36
Estimated Ship Time:4-6 working days
1+$0.4089
- +
Ext. Price(USD):$0.40
MOQ:1
Mult:1
SPQ:1
Aptiv
ECAD Model:
Delphi Connector Seal Metri-Pack Series Hollow Plug
Available Stock
263
Estimated Ship Time:3-5 working days
21+
100+$0.0331
200+$0.032
300+$0.0312
- +
Ext. Price(USD):$3.31
MOQ:100
Mult:1
SPQ:200
12-Pin Bracket Sumicon 1600 Series Connector, Bracket Mount
Available Stock
48
Estimated Ship Time:5-7 working days
24+
1+$1.75
- +
Ext. Price(USD):$1.75
MOQ:1
Mult:1
SPQ:20
Connector Locks, Position Assurance, 2-LOCK, 67POS for MCP2.8
Available Stock
5,000
Estimated Ship Time:4-6 working days
5,000+$0.2125
- +
Ext. Price(USD):$1,062.50
MOQ:5,000
Mult:5,000
SPQ:5,000
RETAINER, MCP2.8, FOR 22WAY
Pre-order
1,000,000
Factory Lead Time:25-42 weeks
10,000+$0.0193
- +
Ext. Price(USD):$193.00
MOQ:10,000
Mult:10,000
SPQ:10,000
45-Pin Shield, DF36 Series, 21.92mm L
Pre-order
100,000
Factory Lead Time:14-26 weeks
10,000+$0.0829
- +
Ext. Price(USD):$829.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Connector Caps and Covers, COVER, 90°, 24POS.
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$2.1375
200+$1.7875
400+$1.5
- +
Ext. Price(USD):$213.75
MOQ:100
Mult:100
SPQ:100
Available Stock
6,462
Estimated Ship Time:4-6 working days
26+
1+$0.5448
50+$0.4019
400+$0.2695
- +
Ext. Price(USD):$0.54
MOQ:1
Mult:1
SPQ:400
3220 3P R/H
Available Stock
12,344
Estimated Ship Time:4-6 working days
1+$0.0158
- +
Ext. Price(USD):$0.01
MOQ:1
Mult:1
SPQ:1
16-Pin Holder, CT Series, Bracket Mount, 20.3mm L × 8.5mm W
Available Stock
11,000
Estimated Ship Time:6-7 working days
26+
1,000+$0.1084
- +
Ext. Price(USD):$108.40
MOQ:1,000
Mult:1,000
Wire Clamp Mini CT Series, 22-Pin Clip Mount, Wire Mount
Pre-order
4,800
Factory Lead Time:18-24 weeks
4,800+$3.7255
- +
Ext. Price(USD):$17,882.40
MOQ:4,800
Mult:4,800
SPQ:4,800
JAE
ECAD Model:
39-Pin Cap (Cover), Front MX47 Series Housings
Pre-order
100,000
Factory Lead Time:14-16 weeks
1,000+$0.8019
- +
Ext. Price(USD):$801.90
MOQ:1,000
Mult:1,000
SPQ:1,000
Conn Housing CLIP FOR AIR BAG 6P
Available Stock
3,500
Estimated Ship Time:4-5 working days
500+$0.1014
1,000+$0.0997
2,000+$0.0976
- +
Ext. Price(USD):$50.70
MOQ:500
Mult:500
SPQ:6,000
Harwin
ECAD Model:
Polarizing Device (Key, Plug, Post), Gecko Series
Available Stock
2,178
Estimated Ship Time:6-12 working days
100+$0.7725
500+$0.7725
1,000+$0.7585
2,500+$0.7585
- +
Ext. Price(USD):$77.25
MOQ:100
Mult:100
Strain Relief
Available Stock
21,075
Estimated Ship Time:7-9 working days
18+
100+$1.5696
200+$1.5369
5,000+$1.1881
10,000+$1.1009
- +
Ext. Price(USD):$156.96
MOQ:100
Mult:1
SPQ:1
Molex
ECAD Model:
16-Pin Backshell, MX150 Series
Available Stock
17,080
Estimated Ship Time:5-7 working days
24+
85+$1.6545
250+$1.6282
6,020+$1.4313
16,000+$1.2474
- +
Ext. Price(USD):$140.63
MOQ:85
Mult:1
SPQ:1
Washer, MTC Series
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$54.6625
250+$50.8875
500+$47.125
1,000+$42.4125
- +
Ext. Price(USD):$5,466.25
MOQ:100
Mult:100
SPQ:100
Automotive Connector TPA, Deutsch DT-XT Series Accessory
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.5875
3,000+$0.4375
5,000+$0.2875
10,000+$0.2113
- +
Ext. Price(USD):$587.50
MOQ:1,000
Mult:1,000
SPQ:1,000
JST
ECAD Model:
2-Pin Retainer XMA Series Fixed Mount 2.5mm L
Available Stock
52,000
Estimated Ship Time:3-5 working days
1,000+$0.0185
3,000+$0.0181
5,000+$0.0177
- +
Ext. Price(USD):$18.50
MOQ:1,000
Mult:1,000
Available Stock
3,000
Estimated Ship Time:4-6 working days
20+
1,000+$0.255
2,000+$0.2508
4,000+$0.2443
- +
Ext. Price(USD):$255.00
MOQ:1,000
Mult:1,000
SPQ:1,000
25 / PageGoto