Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
48-Pin Shroud C-Grid SL Series Clip Mount
Pre-order
80,000
Factory Lead Time:22-26 weeks
800+$2.925
1,600+$2.5625
4,000+$2.5
- +
Ext. Price(USD):$2,340.00
MOQ:800
Mult:800
Ferrule
Available Stock
62
Estimated Ship Time:4-6 working days
1+$4.7215
1,000+$3.4827
2,000+$2.2242
- +
Ext. Price(USD):$4.72
MOQ:1
Mult:1
SPQ:2,000
Available Stock
40,620
Estimated Ship Time:3-5 working days
26+
1+$0.0508
1,500+$0.038
3,000+$0.0267
21,000+$0.0254
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:21,000
HARTING
ECAD Model:
Pin Header, Har-Modular Series, Right Angle
Available Stock
44
Estimated Ship Time:6-12 working days
10+$1.2368
25+$1.2368
500+$1.0686
2,500+$1.0686
- +
Ext. Price(USD):$24.73
MOQ:20
Mult:1
Amphenol
ECAD Model:
2pin Shroud Mini-PV™ Series Wire Mount
Available Stock
1,063
Estimated Ship Time:5-9 working days
22+
5+$0.6694
15+$0.5337
30+$0.5248
- +
Ext. Price(USD):$3.34
MOQ:5
Mult:1
SPQ:1,000
10-Pin Cap (Cover) AMPMODU 50/50 Grid Series
Available Stock
5,086
Estimated Ship Time:5-7 working days
21+
45+$3.3886
150+$3.3312
250+$3.2737
450+$3.2163
5,000+$2.9147
- +
Ext. Price(USD):$152.48
MOQ:45
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Position Assurance, PBT, Black
Available Stock
9,566
Estimated Ship Time:7-9 working days
20+
1,124+$0.1034
2,900+$0.1012
5,700+$0.1001
- +
Ext. Price(USD):$116.22
MOQ:1,124
Mult:1
SPQ:1
TPA Terminal Positioning Clip, Dual Lock Signal Device with Plug and Cap to Ensure Proper Seating
Available Stock
8,400
Estimated Ship Time:4-5 working days
600+$0.0251
1,200+$0.0247
2,400+$0.0242
- +
Ext. Price(USD):$15.06
MOQ:600
Mult:600
SPQ:18,000
Molex
ECAD Model:
TPA FOR L1 NK 250 - 1X6 Ckt
Available Stock
72
Estimated Ship Time:4-6 working days
1+$0.153
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
60-Pin Strain Relief Quickie™ Series Wire Mount
Pre-order
2,520
Factory Lead Time:10-16 weeks
24+
252+$0.5102
378+$0.4968
- +
Ext. Price(USD):$128.57
MOQ:252
Mult:126
SPQ:126
42-Pin Gasket
Available Stock
3,540
Estimated Ship Time:4-6 working days
26+
1+$0.799
1,600+$0.5894
3,200+$0.3764
- +
Ext. Price(USD):$0.79
MOQ:1
Mult:1
SPQ:3,200
JAE
ECAD Model:
JAE Automotive Connector Seal MX44 Series Wire Seal Blue
Available Stock
2,000
Estimated Ship Time:4-6 working days
26+
1+$0.1146
- +
Ext. Price(USD):$0.11
MOQ:1
Mult:1
SPQ:1
Hot Wire Signal Grace Inertia TPA Enables Inertial Locking Mechanism, Forms Circuit Loop and Locks Connector, Ideal Insertion Reliability, Prevents Mating Errors
Available Stock
7,279
Estimated Ship Time:6-7 working days
18+
20+$0.0666
4,000+$0.0346
- +
Ext. Price(USD):$1.33
MOQ:20
Mult:20
Connector Accessories Panel Mount In-Line Bracket SPCC Tin Finish
Available Stock
358
Estimated Ship Time:14-17 working days
10+$2.2852
30+$1.7687
500+$1.3034
1,000+$1.2964
- +
Ext. Price(USD):$50.27
MOQ:22
Mult:1
SPQ:1
Molex
ECAD Model:
Plug 12.8mm L
Available Stock
42,000
Estimated Ship Time:5-7 working days
22+
3,000+$0.0972
6,000+$0.0958
9,000+$0.0945
15,000+$0.0919
21,000+$0.0906
- +
Ext. Price(USD):$291.60
MOQ:3,000
Mult:1
SPQ:1
PCB Connector Frame, 3-Pin, DuoPlug Mark II Series, PCB Mount
Pre-order
9,800,000
Factory Lead Time:22-26 weeks
98,000+$0.1538
500,000+$0.1425
1,000,000+$0.1313
- +
Ext. Price(USD):$15,072.40
MOQ:98,000
Mult:98,000
38-Pin Terminal Position Assurance (TPA) Economy Power Housing
Pre-order
1,170,000
Factory Lead Time:22-26 weeks
11,700+$0.0963
25,000+$0.0838
100,000+$0.0638
- +
Ext. Price(USD):$1,126.71
MOQ:11,700
Mult:11,700
Aptiv
ECAD Model:
Lock Secondary TPA GT PPL
Available Stock
123
Estimated Ship Time:4-6 working days
1+$0.0506
500+$0.0461
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), DIN Rail Mount
Pre-order
3,000
Factory Lead Time:14-26 weeks
300+$3.6529
- +
Ext. Price(USD):$1,095.87
MOQ:300
Mult:50
SPQ:50
23-Pin Cap (Cover), Strain Relief, MTA-100 Series
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.925
2,000+$0.8875
2,500+$0.8125
5,000+$0.7875
10,000+$0.75
- +
Ext. Price(USD):$462.50
MOQ:500
Mult:500
SPQ:500
40-Pin Shield, Micro Quadlok Series
Available Stock
68
Estimated Ship Time:6-12 working days
10+$1.6296
100+$1.6005
500+$1.5714
1,000+$1.5714
2,500+$1.5714
- +
Ext. Price(USD):$24.44
MOQ:15
Mult:1
TE Connectivity AMP-LATCH Strain Relief Bracket for Receptacle Connectors
Available Stock
15,700
Estimated Ship Time:7-9 working days
21+
1,000+$0.2211
2,000+$0.2167
8,000+$0.2046
10,000+$0.1991
- +
Ext. Price(USD):$221.10
MOQ:1,000
Mult:1
SPQ:1
Spring Opener, Dynamic Series, Adhesive Mount, 6.78mm L × 20.6mm H
Available Stock
1,229
Estimated Ship Time:14-17 working days
300+$0.148
500+$0.1356
5,000+$0.1018
10,000+$0.1006
- +
Ext. Price(USD):$50.02
MOQ:338
Mult:1
SPQ:1
Amphenol
ECAD Model:
Gasket, ARC Series, 40-Pin
Available Stock
221
Estimated Ship Time:6-12 working days
10+$1.3125
25+$1.3125
500+$1.134
2,500+$1.134
- +
Ext. Price(USD):$24.93
MOQ:19
Mult:1
6-Pin Backshell
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$5.4625
500+$4.875
2,000+$3.9875
5,000+$3.55
- +
Ext. Price(USD):$1,365.62
MOQ:250
Mult:250
SPQ:250
25 / PageGoto