Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
40-Pin Backshell, HIF3 Series
Available Stock
6
Estimated Ship Time:5-7 working days
25+
1+$9.3331
- +
Ext. Price(USD):$9.33
MOQ:1
Mult:1
SPQ:10
2-Pin Washer, Mini MATE-N-LOK, PCB Mount
Pre-order
6,000,000
Factory Lead Time:22-26 weeks
60,000+$0.1113
250,000+$0.0875
- +
Ext. Price(USD):$6,678.00
MOQ:60,000
Mult:60,000
SPQ:60,000
32-Pin Retainer GT25 Series
Available Stock
57
Estimated Ship Time:6-7 working days
20+$0.3405
- +
Ext. Price(USD):$6.81
MOQ:20
Mult:20
31-Pin Protective Cap, DF9M Series, SMD
Available Stock
172
Estimated Ship Time:4-6 working days
1+$0.258
- +
Ext. Price(USD):$0.25
MOQ:1
Mult:1
SPQ:1
8-Pin Cap (Cover), Strain Relief MTA-156 Series 31.7mm L × 11.18mm H
Available Stock
7,500
Estimated Ship Time:4-6 working days
250+$0.411
500+$0.404
1,000+$0.3953
- +
Ext. Price(USD):$102.75
MOQ:250
Mult:250
SPQ:4,000
Yazaki
ECAD Model:
Wire Seal with Deep Blue
Available Stock
57
Estimated Ship Time:4-6 working days
1+$0.0218
1,000+$0.0198
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Shroud C-Grid SL Series Wire Mount 36.67mm L × 8.12mm H
Pre-order
140,000
Factory Lead Time:22-26 weeks
1,400+$0.9375
4,000+$0.825
10,000+$0.8125
- +
Ext. Price(USD):$1,312.50
MOQ:1,400
Mult:1,400
Yazaki
ECAD Model:
Wire Seal with Deep Blue
Available Stock
32,270
Estimated Ship Time:4-6 working days
1+$0.0169
1,000+$0.0154
- +
Ext. Price(USD):$0.01
MOQ:1
Mult:1
SPQ:1
TE Connectivity Strain Relief, 1-640722 Series, For 6 & 8 Circuit Plug-In Housing
Available Stock
2,800
Estimated Ship Time:4-6 working days
1,400+$0.7565
2,800+$0.7437
5,600+$0.7277
- +
Ext. Price(USD):$1,059.10
MOQ:1,400
Mult:1,400
SPQ:4,200
Sealing Plug
Available Stock
12,797
Estimated Ship Time:6-7 working days
25+
20+$0.0278
6,000+$0.0127
- +
Ext. Price(USD):$0.55
MOQ:20
Mult:20
Universal I/O Pin Connector Stress Relief, Ribbon Cable Assembly, Glass-Filled Polyester, Lock Hook, 10-64 Pins
Pre-order
800,000
Factory Lead Time:22-26 weeks
8,000+$2.925
10,000+$2.8375
- +
Ext. Price(USD):$23,400.00
MOQ:8,000
Mult:8,000
JST
ECAD Model:
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.2693
36,000+$0.2648
60,000+$0.2581
- +
Ext. Price(USD):$3,231.60
MOQ:12,000
Mult:12,000
SPQ:12,000
8-Pin Terminal Position Assurance (TPA) Economy Power Series
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$0.0938
25,000+$0.0813
100,000+$0.0625
- +
Ext. Price(USD):$1,125.60
MOQ:12,000
Mult:12,000
Cap (Cover), Dust MTA-156 Series, 24-Pin
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$0.6875
500+$0.6625
1,000+$0.575
25,000+$0.5125
50,000+$0.45
- +
Ext. Price(USD):$85.93
MOQ:125
Mult:125
SPQ:125
Molex
ECAD Model:
8-Pin Terminal Position Assurance (TPA) L1NK 250 Series 22.39mm(L) × 7.21mm(H)
Pre-order
800,000
Factory Lead Time:22-26 weeks
8,000+$0.09
- +
Ext. Price(USD):$720.00
MOQ:8,000
Mult:8,000
TE Connectivity Heavy Duty Connector, Rear Seal, Power Versa-Lock 5.0 Series, 2 Contacts
Available Stock
92
Estimated Ship Time:3-5 working days
25+
10+$0.231
200+$0.2233
600+$0.2174
- +
Ext. Price(USD):$2.31
MOQ:10
Mult:1
SPQ:200
4-Pin PCB Frame DuoPlug Mark II PCB Connectors PCB Mount 15.5mm L
Pre-order
5,040,000
Factory Lead Time:22-26 weeks
50,400+$0.2013
500,000+$0.1863
1,000,000+$0.1725
- +
Ext. Price(USD):$10,145.52
MOQ:50,400
Mult:50,400
Molex
ECAD Model:
14-Pin Terminal Position Assurance (TPA) 24.7mm L × 6.5mm H Connector
Available Stock
12,800
Estimated Ship Time:3-5 working days
23+
3,200+$0.1332
6,400+$0.1298
9,600+$0.1265
- +
Ext. Price(USD):$426.24
MOQ:3,200
Mult:3,200
SPQ:3,200
10-Pin Cap (Cover) AMPMODU Level V Series
Pre-order
216,000
Factory Lead Time:22-26 weeks
2,160+$2.225
5,000+$1.5625
10,000+$1.4875
25,000+$1.4125
- +
Ext. Price(USD):$4,806.00
MOQ:2,160
Mult:2,160
SPQ:2,160
Backshell, MTC Series
Pre-order
2,100
Factory Lead Time:22-26 weeks
21+$294.9375
50+$189.7375
500+$134.925
1,000+$122.275
- +
Ext. Price(USD):$6,193.68
MOQ:21
Mult:21
1-Pin Cap (Cover), MATEnet Series
Available Stock
6,000
Estimated Ship Time:5-7 working days
26+
1,500+$0.1321
4,500+$0.1279
- +
Ext. Price(USD):$198.15
MOQ:1,500
Mult:1,500
SPQ:1,500
Wire Seal, Green
Available Stock
13,815
Estimated Ship Time:4-6 working days
1+$0.0209
1,000+$0.019
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
HARTING
ECAD Model:
SEK Series Female Connector, 14-Pin, Strain Relief, 22.4mm L × 6.1mm H
Available Stock
79
Estimated Ship Time:6-12 working days
10+$0.4074
100+$0.365
500+$0.3585
1,000+$0.3585
2,500+$0.3585
- +
Ext. Price(USD):$24.44
MOQ:60
Mult:10
34-Pin Bracket Connector, Sumicon 1600 Series, Bracket Mount
Available Stock
60
Estimated Ship Time:5-7 working days
23+
1+$2.1388
- +
Ext. Price(USD):$2.13
MOQ:1
Mult:1
SPQ:20
Polarizing Device (Key, Plug, Post), 13.84mm L × 1.49mm H
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.9625
5,000+$0.7625
50,000+$0.4625
100,000+$0.4375
- +
Ext. Price(USD):$1,925.00
MOQ:2,000
Mult:2,000
25 / PageGoto