Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
40-Pin Shroud, C-Grid SL Series, Wire Mount, 68.17mm L
Pre-order
40,000
Factory Lead Time:22-26 weeks
400+$3.6625
800+$3.2125
2,000+$3.1375
- +
Ext. Price(USD):$1,465.00
MOQ:400
Mult:400
Connector Accessories, Secondary Locking, 94 Pos, Straight
Available Stock
3,134
Estimated Ship Time:3-5 working days
26+
1+$0.0858
100+$0.0644
500+$0.0429
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:500
11-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Pre-order
550,000
Factory Lead Time:22-26 weeks
5,500+$0.24
10,000+$0.2238
25,000+$0.2075
50,000+$0.1925
- +
Ext. Price(USD):$1,320.00
MOQ:5,500
Mult:5,500
1pin Shield
Available Stock
2,016
Estimated Ship Time:4-6 working days
672+$3.4003
- +
Ext. Price(USD):$2,285.00
MOQ:672
Mult:672
SPQ:672
Connector Accessories, Housing
Available Stock
5,460
Estimated Ship Time:6-7 working days
26+
20+$0.1315
1,500+$0.0612
- +
Ext. Price(USD):$2.63
MOQ:20
Mult:20
1-Pin Wire Seal 9.15mm L
Available Stock
4,323
Estimated Ship Time:7-9 working days
12+
1,200+$0.0935
3,000+$0.0913
- +
Ext. Price(USD):$112.20
MOQ:1,200
Mult:1
SPQ:1
3-Pin PCB Frame DuoPlug Mark II PCB Connector, 35mm L
Pre-order
175,000
Factory Lead Time:22-26 weeks
1,750+$0.3238
3,500+$0.2713
7,000+$0.2275
50,000+$0.1825
100,000+$0.16
- +
Ext. Price(USD):$566.65
MOQ:1,750
Mult:1,750
SPQ:1,750
50-Pin Strain Relief, 68.1mm L × 6mm H
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.4875
- +
Ext. Price(USD):$4,875.00
MOQ:10,000
Mult:10,000
SPQ:10,000
JST
ECAD Model:
6pin Retainer XMA Series Fixed mounting
Available Stock
1,036
Estimated Ship Time:5-9 working days
22+
20+$0.0529
150+$0.0412
300+$0.0405
- +
Ext. Price(USD):$1.05
MOQ:20
Mult:10
SPQ:1,000
Amphenol
ECAD Model:
Bootloader 8-Pin ATM Series
Available Stock
97
Estimated Ship Time:6-12 working days
10+$1.1988
25+$1.1988
500+$1.0357
2,500+$1.0357
- +
Ext. Price(USD):$25.17
MOQ:21
Mult:1
Available Stock
8,000
Estimated Ship Time:4-6 working days
1,000+$0.2338
- +
Ext. Price(USD):$233.80
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
Terminal 4-Pin TPA Mini-Fit Jr Series
Available Stock
13,970
Estimated Ship Time:6-7 working days
24+
20+$0.0628
500+$0.0327
- +
Ext. Price(USD):$1.25
MOQ:20
Mult:20
1-Pin Terminal Position Assurance (TPA) Val-U-Lok Housing 9.4mm × 5.4102mm × 4.35mm
Available Stock
37,500
Estimated Ship Time:4-6 working days
12,500+$0.0344
25,000+$0.0338
50,000+$0.0331
- +
Ext. Price(USD):$430.00
MOQ:12,500
Mult:12,500
SPQ:37,500
JST
ECAD Model:
Available Stock
10,000
Estimated Ship Time:4-6 working days
22+
1,000+$0.1097
- +
Ext. Price(USD):$109.70
MOQ:1,000
Mult:1,000
SPQ:1,000
TPA Terminal Position Assurance, Triple Lock Power Connector with Plug and Cap, Ensures Terminals Fully Seated for Reliability
Available Stock
910
Estimated Ship Time:3-5 working days
23+
100+$0.0927
200+$0.0897
300+$0.0873
- +
Ext. Price(USD):$9.27
MOQ:100
Mult:1
SPQ:200
Automotive Connector Caps and Covers
Available Stock
1,300
Estimated Ship Time:4-6 working days
650+$0.4522
1,300+$0.4445
2,600+$0.435
- +
Ext. Price(USD):$293.93
MOQ:650
Mult:650
SPQ:650
Amphenol
ECAD Model:
2-Pin Wedge for Sockets, AT Series, Bracket Mount
Available Stock
4,837
Estimated Ship Time:4-6 working days
1+$0.0714
1,000+$0.0601
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
Harwin
ECAD Model:
12-Pin Shell Gecko Series Panel Mount
Available Stock
197
Estimated Ship Time:7-12 working days
1+$105.5742
10+$100.335
25+$95.0958
50+$89.7578
- +
Ext. Price(USD):$316.72
MOQ:3
Mult:1
SPQ:1
Shield Header, 40-Pin, DF36 Series
Pre-order
10,000
Factory Lead Time:14-26 weeks
1,000+$0.7204
- +
Ext. Price(USD):$720.40
MOQ:1,000
Mult:1,000
SPQ:1,000
Connector Accessories Double Lock Plate Black
Pre-order
1,200,000
Factory Lead Time:25-42 weeks
12,000+$0.0407
- +
Ext. Price(USD):$488.40
MOQ:12,000
Mult:12,000
SPQ:12,000
Yazaki
ECAD Model:
Available Stock
600
Estimated Ship Time:6-7 working days
25+
100+$0.6397
- +
Ext. Price(USD):$63.97
MOQ:100
Mult:100
Backshell
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$1,474.025
50+$1,304.4375
100+$1,095.725
250+$1,043.5625
500+$965.2875
- +
Ext. Price(USD):$36,850.62
MOQ:25
Mult:25
SPQ:25
Molex
ECAD Model:
Mounting Clip 2481 Series, Bracket Mount, 57.4mm L × 31.8mm H
Pre-order
210,000
Factory Lead Time:22-26 weeks
2,100+$2.6625
5,000+$2.4875
10,000+$2.3375
25,000+$2.175
- +
Ext. Price(USD):$5,591.25
MOQ:2,100
Mult:2,100
SPQ:2,100
Molex
ECAD Model:
7-Pin Terminal Position Assurance (TPA) Connector, 201196/201200 Series
Pre-order
720,000
Factory Lead Time:22-26 weeks
7,200+$0.0738
16,000+$0.065
40,000+$0.0638
- +
Ext. Price(USD):$531.36
MOQ:7,200
Mult:7,200
Cable Accessory, MT Sealed Black N.B.R
Available Stock
108,133
Estimated Ship Time:3-5 working days
26+
1+$0.0336
1,000+$0.0252
2,000+$0.0168
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:100,000
25 / PageGoto