Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Available Stock
2,995
Estimated Ship Time:3-5 working days
26+
1+$0.2089
1,000+$0.1567
2,000+$0.1045
- +
Ext. Price(USD):$0.20
MOQ:1
Mult:1
SPQ:2,000
TE Connectivity Heavy Duty Power Connector Accessory Wedge Lock, MIC MKII Series, 13-Pos
Available Stock
3,500
Estimated Ship Time:6-7 working days
24+
500+$0.1426
- +
Ext. Price(USD):$71.30
MOQ:500
Mult:500
Retainer Clip DF1E Series 5-Pin Fixed Mount 15.5mm L × 2.4mm H
Available Stock
35
Estimated Ship Time:4-6 working days
1+$0.1568
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:1
TE Connectivity
Available Stock
51
Estimated Ship Time:6-7 working days
20+$4.5448
- +
Ext. Price(USD):$90.89
MOQ:20
Mult:20
Standard Rectangular Connectors
Available Stock
102
Estimated Ship Time:12-16 working days
1+$8.484
- +
Ext. Price(USD):$203.61
MOQ:24
Mult:1
Rear Housing MTC Series
Pre-order
500
Factory Lead Time:22-26 weeks
5+$1,585.0625
10+$1,108.75
50+$713.275
100+$602.3125
250+$554.775
- +
Ext. Price(USD):$7,925.31
MOQ:5
Mult:5
SPQ:5
Yazaki
ECAD Model:
Single Wire Seal Black、YESConnector
Available Stock
3
Estimated Ship Time:4-6 working days
1+$0.0445
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
40-Pin Strain Relief Milli-Grid, Wire Mount, 8mm H
Available Stock
16,000
Estimated Ship Time:3-6 working days
18+
1+$0.5035
1,000+$0.302
4,000+$0.1511
- +
Ext. Price(USD):$0.50
MOQ:1
Mult:1
SPQ:4,000
Molex
ECAD Model:
Pre-order
360,000
Factory Lead Time:22-26 weeks
3,600+$0.4875
8,000+$0.425
20,000+$0.4125
- +
Ext. Price(USD):$1,755.00
MOQ:3,600
Mult:3,600
Wire Seal, Blue Color
Available Stock
124
Estimated Ship Time:3-5 working days
19+
1+$0.039
1,000+$0.0345
2,000+$0.03
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:2,000
0509 12-Pin R/H
Available Stock
8,481
Estimated Ship Time:4-6 working days
1+$0.0433
1,000+$0.0397
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Position Assurance (CPA) SL 70066
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.155
20,000+$0.1363
50,000+$0.1338
- +
Ext. Price(USD):$1,550.00
MOQ:10,000
Mult:10,000
34-Pin Bracket Sumicon 1600 Series Connectors Bracket Mount, 45mm L
Available Stock
162
Estimated Ship Time:6-7 working days
21+
20+$0.9982
- +
Ext. Price(USD):$19.96
MOQ:20
Mult:20
Backshell, MTC Series
Available Stock
100
Estimated Ship Time:12-16 working days
1+$140.056
- +
Ext. Price(USD):$280.11
MOQ:2
Mult:1
CLR Plug Seal for 1.5-2.5mm Hole
Available Stock
57,070
Estimated Ship Time:3-5 working days
23+
1+$0.0448
5,000+$0.0336
10,000+$0.0224
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:10,000
Amphenol
ECAD Model:
34-Pin Strain Relief, Quickie™ Series
Pre-order
82,080
Factory Lead Time:10-16 weeks
24+
8,208+$0.5346
8,424+$0.5206
- +
Ext. Price(USD):$4,387.99
MOQ:8,208
Mult:216
SPQ:216
26-Pin Cap (Cover), Strain Relief MTA-100 Series
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.9375
2,000+$0.8875
2,500+$0.825
5,000+$0.7875
10,000+$0.7625
- +
Ext. Price(USD):$468.75
MOQ:500
Mult:500
SPQ:500
Cap (Cover), Dust, 12-Pin, MTA-156 Series
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.15
1,000+$0.1313
25,000+$0.1175
50,000+$0.1025
- +
Ext. Price(USD):$75.00
MOQ:500
Mult:500
Yazaki
ECAD Model:
Waterproof Plug
Available Stock
1,793
Estimated Ship Time:3-5 working days
24+
1+$0.0925
1,000+$0.0694
2,000+$0.0532
20,000+$0.0462
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:20,000
Pre-order
840,000
Factory Lead Time:22-26 weeks
8,400+$2.2125
- +
Ext. Price(USD):$18,585.00
MOQ:8,400
Mult:8,400
SPQ:8,400
Amphenol
ECAD Model:
20-Pin Strain Relief, Quickie™ Series
Pre-order
3,000,000
Factory Lead Time:10 weeks
6,000+$0.7851
- +
Ext. Price(USD):$4,710.60
MOQ:6,000
Mult:500
SPQ:500
TE Connectivity Automotive Connector Seal, 2350943 Series, Panel Mount Flange
Available Stock
305
Estimated Ship Time:6-7 working days
20+$1.1819
- +
Ext. Price(USD):$23.63
MOQ:20
Mult:20
TE Connectivity MATE-N-LOK Strain Relief, 6 & 8 Circuit Plug Housing
Available Stock
2,800
Estimated Ship Time:4-6 working days
1,400+$0.8348
2,800+$0.8206
5,600+$0.8029
- +
Ext. Price(USD):$1,168.72
MOQ:1,400
Mult:1,400
SPQ:1,400
090II CLIP (Φ7.0-A)
Available Stock
48
Estimated Ship Time:4-6 working days
1+$0.0346
100+$0.0296
1,000+$0.028
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Terminal Position Assurance (TPA) Mini-Fit Series
Available Stock
3,596
Estimated Ship Time:5-9 working days
22+
5+$0.5159
15+$0.3998
30+$0.3932
- +
Ext. Price(USD):$2.57
MOQ:5
Mult:1
SPQ:5,500
25 / PageGoto