Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
RP Safety Lock Lever, JK Series
Available Stock
690
Estimated Ship Time:5-7 working days
19+
55+$0.443
165+$0.4091
330+$0.3819
- +
Ext. Price(USD):$24.36
MOQ:55
Mult:55
SPQ:55
JST
ECAD Model:
Available Stock
3,480
Estimated Ship Time:6-7 working days
24+
20+$0.1142
2,000+$0.0462
- +
Ext. Price(USD):$2.28
MOQ:20
Mult:20
JST
ECAD Model:
16-Pin Retainer, Fixed Mount
Available Stock
1,939
Estimated Ship Time:4-6 working days
1+$0.047
1,000+$0.0439
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
Yazaki
ECAD Model:
Wire Seal With White
Available Stock
33,509
Estimated Ship Time:3-5 working days
25+
1+$0.0727
22,500+$0.0545
45,000+$0.0363
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:45,000
Terminal Housing, 16-Pin, TPA, Economy Power
Available Stock
18,560
Estimated Ship Time:6-7 working days
20+
20+$0.1159
600+$0.0603
- +
Ext. Price(USD):$2.31
MOQ:20
Mult:20
Amphenol
ECAD Model:
18-Pin Wedgelock ATV Series Edge Mount Connector
Available Stock
64
Estimated Ship Time:3-5 working days
1+$0.6273
13+$0.4705
25+$0.3136
- +
Ext. Price(USD):$0.62
MOQ:1
Mult:1
SPQ:1,600
EDAC
ECAD Model:
Cap (Cover), Sealing Mount
Pre-order
100,000
Factory Lead Time:9-18 weeks
1,000+$0.2958
2,000+$0.2332
5,000+$0.2019
10,000+$0.2003
20,000+$0.1926
- +
Ext. Price(USD):$295.80
MOQ:1,000
Mult:1,000
JST
ECAD Model:
Available Stock
200
Estimated Ship Time:5-7 working days
25+
20+$0.4136
1,000+$0.1219
- +
Ext. Price(USD):$8.27
MOQ:20
Mult:1
SPQ:1,000
Contact SKT Crimp TPA
Available Stock
10,740
Estimated Ship Time:4-6 working days
1+$0.083
1,000+$0.0754
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:1
Latch AMP-DUAC/PL Series
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$2.8625
10,000+$2.6125
25,000+$2.4875
- +
Ext. Price(USD):$14,312.50
MOQ:5,000
Mult:5,000
3M
ECAD Model:
3M Gold, Nickel PCB Connector Contact, 3505 Series
Available Stock
50
Estimated Ship Time:4-6 working days
1+$1.2494
- +
Ext. Price(USD):$1.24
MOQ:1
Mult:1
SPQ:1
JST
ECAD Model:
Connector Accessories, 34 POS Holder, Straight, Polybutylene Terephthalate, White, Box
Available Stock
8,810
Estimated Ship Time:6-7 working days
25+
20+$0.2776
1,000+$0.0985
- +
Ext. Price(USD):$5.55
MOQ:20
Mult:20
7pin Cap (Cover), Strain Relief MTA-156 Series
Available Stock
25
Estimated Ship Time:3-5 working days
24+
1+$1.0041
- +
Ext. Price(USD):$1.00
MOQ:1
Mult:1
SPQ:1
Yazaki
ECAD Model:
Available Stock
2,970
Estimated Ship Time:4-6 working days
1+$0.0335
1,000+$0.0304
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Blue Car Connector Housing Sealing Seal
Available Stock
4,000
Estimated Ship Time:3-5 working days
1+$0.1549
2,500+$0.1161
5,000+$0.0774
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:5,000
Backshell
Pre-order
3,000
Factory Lead Time:22-26 weeks
30+$1,031.3625
50+$912.725
500+$675.4125
1,000+$620.65
- +
Ext. Price(USD):$30,940.87
MOQ:30
Mult:30
Molex
ECAD Model:
8-Pin Wedgelock ML-XT 93445 Housings Edge Mount
Available Stock
202
Estimated Ship Time:4-6 working days
18+
1+$0.0783
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Wedge Lock Straight Nylon Green ML-XT™ Bag
Available Stock
42
Estimated Ship Time:3-5 working days
15+
10+$0.3696
50+$0.3598
100+$0.3473
- +
Ext. Price(USD):$3.69
MOQ:10
Mult:10
SPQ:10
6-Pin TPA
Available Stock
107
Estimated Ship Time:3-5 working days
25+
1+$0.1007
2,000+$0.0756
4,000+$0.0504
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:4,000
22-Pin Cap (Cover) MCP Series, 28.9mm W × 28.75mm H
Available Stock
498
Estimated Ship Time:6-12 working days
10+$1.9555
100+$1.9206
250+$1.9206
500+$1.8857
1,000+$1.8857
- +
Ext. Price(USD):$25.42
MOQ:13
Mult:1
10-Pin Terminal Position Assurance (TPA) Economy Power Housings, 24.4mm L × 2.5146mm H
Available Stock
18,414
Estimated Ship Time:6-7 working days
26+
20+$0.1041
800+$0.0485
- +
Ext. Price(USD):$2.08
MOQ:20
Mult:20
Molex
ECAD Model:
22-Pin Shroud C-Grid SL Series Wire Mount 45.31mm L
Available Stock
18
Estimated Ship Time:3-5 working days
15+
1+$1.8104
30+$1.7626
50+$1.7007
- +
Ext. Price(USD):$1.81
MOQ:1
Mult:1
SPQ:1
Available Stock
2,995
Estimated Ship Time:3-5 working days
26+
1+$0.2089
1,000+$0.1567
2,000+$0.1045
- +
Ext. Price(USD):$0.20
MOQ:1
Mult:1
SPQ:2,000
TE Connectivity Heavy Duty Power Connector Accessory Wedge Lock, MIC MKII Series, 13-Pos
Available Stock
3,500
Estimated Ship Time:6-7 working days
24+
500+$0.1426
- +
Ext. Price(USD):$71.30
MOQ:500
Mult:500
Retainer Clip DF1E Series 5-Pin Fixed Mount 15.5mm L × 2.4mm H
Available Stock
35
Estimated Ship Time:4-6 working days
1+$0.1568
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:1
25 / PageGoto