Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Rear Housing MTC Series
Pre-order
500
Factory Lead Time:22-26 weeks
5+$2,232.15
10+$1,561.375
50+$1,004.475
100+$848.2125
250+$781.2625
- +
Ext. Price(USD):$11,160.75
MOQ:5
Mult:5
SPQ:5
Boot
Available Stock
84
Estimated Ship Time:4-6 working days
1+$2.1792
525+$1.6073
1,050+$1.0265
- +
Ext. Price(USD):$2.17
MOQ:1
Mult:1
SPQ:1,050
Molex
ECAD Model:
Polarizing Device 1-Pin (Key, Plug, Post)
Available Stock
30,000
Estimated Ship Time:3-5 working days
26+
30,000+$0.0244
60,000+$0.0238
90,000+$0.0232
- +
Ext. Price(USD):$732.00
MOQ:30,000
Mult:30,000
SPQ:30,000
Yazaki
ECAD Model:
Available Stock
205
Estimated Ship Time:3-5 working days
24+
1+$0.4952
5,000+$0.3714
10,000+$0.2476
- +
Ext. Price(USD):$0.49
MOQ:1
Mult:1
SPQ:10,000
JST
ECAD Model:
Connector Accessories Ferrite Box, 2POS, Polybutylene Terephthalate, Yellow
Pre-order
120,000
Factory Lead Time:16-18 weeks
12,000+$0.0546
- +
Ext. Price(USD):$655.20
MOQ:12,000
Mult:12,000
30-Pin Holder CT Series Bracket Mount 34.3mm × 8.5mm × 8.3mm
Available Stock
10,500
Estimated Ship Time:4-5 working days
750+$0.1135
1,500+$0.1116
3,000+$0.1092
- +
Ext. Price(USD):$85.12
MOQ:750
Mult:750
SPQ:6,000
Molex
ECAD Model:
16-Pin Backshell
Available Stock
175
Estimated Ship Time:4-6 working days
21+
50+$0.9165
- +
Ext. Price(USD):$66.90
MOQ:73
Mult:1
SPQ:300
Molex
ECAD Model:
2-Pin Backshell, MX150 Series
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$3.225
1,200+$2.8125
3,000+$2.75
- +
Ext. Price(USD):$1,935.00
MOQ:600
Mult:600
13-Pin Terminal Position Assurance (TPA) Economy Power Housings
Available Stock
18,600
Estimated Ship Time:6-7 working days
26+
600+$0.0598
- +
Ext. Price(USD):$35.88
MOQ:600
Mult:600
Available Stock
38,045
Estimated Ship Time:4-6 working days
1+$0.0423
1,000+$0.0368
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
TE Connectivity Automotive Connector Mounting Clip, Series 2325098
Available Stock
764
Estimated Ship Time:6-12 working days
10+$0.8846
100+$0.8109
500+$0.8109
1,000+$0.7962
2,500+$0.7962
- +
Ext. Price(USD):$24.76
MOQ:28
Mult:1
4-Pin Terminal Position Assurance (TPA) Economy Power II Housings 2.65mm H
Available Stock
31,680
Estimated Ship Time:4-6 working days
720+$0.049
1,440+$0.0481
2,880+$0.0472
- +
Ext. Price(USD):$35.28
MOQ:720
Mult:720
SPQ:36,000
64-Pin Cap (Cover) AMPMODU Level V Series
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$4.25
1,000+$4.025
5,000+$2.8375
10,000+$2.6875
25,000+$2.5625
- +
Ext. Price(USD):$2,125.00
MOQ:500
Mult:500
SPQ:500
Shell, MTC100 Series
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$304.825
50+$210.35
500+$149.3625
1,000+$137.175
- +
Ext. Price(USD):$7,620.62
MOQ:25
Mult:25
Bus Bar, MTC Series
Pre-order
43,000
Factory Lead Time:22-26 weeks
430+$48.7125
500+$41.9125
1,000+$32.85
- +
Ext. Price(USD):$20,946.37
MOQ:430
Mult:430
SPQ:430
32-Pin Shroud AMPMODU MTE Series 45.33mm (L)
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$1.9125
5,000+$1.725
50,000+$1.45
100,000+$1.3375
- +
Ext. Price(USD):$3,825.00
MOQ:2,000
Mult:2,000
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
4,000
Estimated Ship Time:4-5 working days
2,000+$0.1814
4,000+$0.1783
8,000+$0.1745
- +
Ext. Price(USD):$362.80
MOQ:2,000
Mult:2,000
SPQ:2,000
JST
ECAD Model:
Connector Accessories 2 POS 6.5mm Housing Retainer Straight Polyamide 66
Available Stock
12,000
Estimated Ship Time:4-6 working days
4,000+$0.0565
- +
Ext. Price(USD):$226.00
MOQ:4,000
Mult:4,000
SPQ:4,000
TPA Terminal Position Assurance, Triple Lock Power Connector with Plug and Cap, Ensures Terminals Fully Seated for Reliability
Available Stock
35
Estimated Ship Time:3-5 working days
21+
1+$0.0724
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1,500
Strain Relief
Pre-order
2,000
Factory Lead Time:22-26 weeks
20+$3.3125
150+$2.7875
250+$2.625
- +
Ext. Price(USD):$66.25
MOQ:20
Mult:20
JST
ECAD Model:
Available Stock
132,000
Estimated Ship Time:5-7 working days
21+
2,000+$0.0508
- +
Ext. Price(USD):$101.60
MOQ:2,000
Mult:2,000
SPQ:2,000
Sleeve, Adhesive Mount
Available Stock
7,500
Estimated Ship Time:4-6 working days
2,500+$0.5526
- +
Ext. Price(USD):$1,381.50
MOQ:2,500
Mult:2,500
SPQ:2,500
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$3.3625
10,000+$3.275
- +
Ext. Price(USD):$16,812.50
MOQ:5,000
Mult:5,000
Aptiv
ECAD Model:
Connector Accessories Lock Secondary TPA Polyamide 66
Available Stock
8
Estimated Ship Time:3-5 working days
24+
1+$0.0439
10+$0.0425
30+$0.0414
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:10
38-Pin Cap (Cover)
Available Stock
118
Estimated Ship Time:4-5 working days
59+$0.9369
118+$0.921
236+$0.9012
- +
Ext. Price(USD):$55.27
MOQ:59
Mult:59
SPQ:236
25 / PageGoto