Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93445 Housings
Available Stock
3,361
Estimated Ship Time:7-9 working days
19+
332+$0.176
- +
Ext. Price(USD):$58.43
MOQ:332
Mult:1
SPQ:1
18-Pin Cap (Cover), Strain Relief MTA-156 Series 11.94mm H
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.4375
10,000+$0.335
- +
Ext. Price(USD):$875.00
MOQ:2,000
Mult:2,000
JST
ECAD Model:
Connector Accessories 26 POS Holder Straight Polybutylene Terephthalate White Box
Available Stock
16,860
Estimated Ship Time:6-7 working days
22+
20+$0.1831
1,000+$0.0544
- +
Ext. Price(USD):$3.66
MOQ:20
Mult:20
Molex
ECAD Model:
Shroud Header, 8-Pin, C-Grid SL Series, Clip Mount, Free Hanging, 14.37mm L × 19.05mm H
Available Stock
1,881
Estimated Ship Time:6-12 working days
10+$0.9405
100+$0.8621
2,000+$0.8465
3,000+$0.8465
- +
Ext. Price(USD):$28.21
MOQ:30
Mult:10
TE Connectivity EP2.5 Series Terminal Locking Piece
Available Stock
27,000
Estimated Ship Time:4-5 working days
9,000+$0.0731
18,000+$0.0719
36,000+$0.0703
- +
Ext. Price(USD):$657.90
MOQ:9,000
Mult:9,000
SPQ:36,000
JST
ECAD Model:
Available Stock
19,203
Estimated Ship Time:6-7 working days
24+
20+$0.0943
1,000+$0.0323
- +
Ext. Price(USD):$1.88
MOQ:20
Mult:20
Wire Seal, Red Color
Available Stock
7,950
Estimated Ship Time:3-5 working days
26+
1+$0.0746
5,000+$0.056
10,000+$0.0373
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:10,000
Connector Holder, CT Series, 16-Pin
Available Stock
8,757
Estimated Ship Time:3-5 working days
17+
100+$0.0501
200+$0.0484
300+$0.0471
- +
Ext. Price(USD):$5.01
MOQ:100
Mult:1
SPQ:200
TE Connectivity Strain Relief, 640715 Series, For MATE-N-LOK Connectors
Available Stock
600
Estimated Ship Time:4-6 working days
200+$1.1692
400+$1.1494
800+$1.1246
- +
Ext. Price(USD):$233.84
MOQ:200
Mult:200
SPQ:1,000
Blue Car Connector Housing Sealing Seal
Available Stock
54,909
Estimated Ship Time:3-5 working days
26+
1+$0.0429
10,000+$0.0322
20,000+$0.0215
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:20,000
Shielded MTC Series
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$38.325
500+$36.7125
1,000+$32.5875
- +
Ext. Price(USD):$9,581.25
MOQ:250
Mult:250
SPQ:250
12-Pin Shell Sumicon 1600 Series Connector
Available Stock
100
Estimated Ship Time:5-7 working days
24+
1+$6.4165
- +
Ext. Price(USD):$6.41
MOQ:1
Mult:1
SPQ:10
30-Pin Cap (Cover) AMPMODU MT Series
Pre-order
400,000
Factory Lead Time:25-42 weeks
4,000+$1.2591
- +
Ext. Price(USD):$5,036.40
MOQ:4,000
Mult:1
SPQ:1
4-Pin Cap (Cover), Dust ATM Series Plugs
Available Stock
998
Estimated Ship Time:4-6 working days
1+$0.5977
1,000+$0.5238
- +
Ext. Price(USD):$0.59
MOQ:1
Mult:1
Molex
ECAD Model:
Miscellaneous Product
Available Stock
2,454
Estimated Ship Time:6-7 working days
20+
20+$0.2304
1,500+$0.1197
- +
Ext. Price(USD):$4.60
MOQ:20
Mult:20
Wire Seal Black Color
Available Stock
1,822
Estimated Ship Time:4-6 working days
1+$0.2819
- +
Ext. Price(USD):$0.28
MOQ:1
Mult:1
SPQ:1
4-Pin Cap (Cover), Micro MATE-N-LOK Series
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$1.625
2,000+$1.4625
5,000+$1.3875
- +
Ext. Price(USD):$1,625.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
12-Pin Gasket, MX150L Series, Flange Mount, 70.97mm × 30.48mm
Pre-order
100,800
Factory Lead Time:22-26 weeks
1,008+$0.525
4,000+$0.4625
10,000+$0.45
- +
Ext. Price(USD):$529.20
MOQ:1,008
Mult:1,008
Cover, Ejection, 50, Front, Low, Thermoplastic
Pre-order
50,000
Factory Lead Time:25-42 weeks
500+$1.7538
- +
Ext. Price(USD):$876.90
MOQ:500
Mult:1
SPQ:1
Black Connector Housing Seal for Car
Available Stock
12,868
Estimated Ship Time:3-5 working days
26+
1+$0.036
10,000+$0.027
20,000+$0.0238
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:20,000
48-Pin Enclosure AT/DT, ATM/DTM Series
Available Stock
23
Estimated Ship Time:6-12 working days
1+$25.2336
10+$24.783
250+$24.3324
500+$24.3324
- +
Ext. Price(USD):$25.23
MOQ:1
Mult:1
Metal Side Mounting Clip, 8.2mm Hole
Available Stock
49
Estimated Ship Time:4-6 working days
1+$0.7139
60+$0.6163
- +
Ext. Price(USD):$0.71
MOQ:1
Mult:1
Pre-order
50,000
Factory Lead Time:4-6 weeks
100+$15.6189
500+$15.0612
- +
Ext. Price(USD):$1,561.89
MOQ:100
Mult:100
Hirose Rear Cover, HIF3B Series, For Crimp Socket
Available Stock
100
Estimated Ship Time:5-7 working days
25+
1+$8.7498
- +
Ext. Price(USD):$8.74
MOQ:1
Mult:1
SPQ:10
Backshell, MTC100 Series
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$349.15
50+$219.6125
500+$159.725
1,000+$144.75
- +
Ext. Price(USD):$8,728.75
MOQ:25
Mult:25
25 / PageGoto