Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Interim Clip, Polyester, Black
Available Stock
20
Estimated Ship Time:3-5 working days
06+
1+$2.8278
30+$2.7805
50+$2.683
- +
Ext. Price(USD):$2.82
MOQ:1
Mult:1
SPQ:1
CJT
ECAD Model:
Rectangular Connector Retainer, 2-Pin, 2.50mm Pitch
Pre-order
100,000
Factory Lead Time:3-5 weeks
26+
1,000+$0.0132
3,000+$0.0127
5,000+$0.0121
- +
Ext. Price(USD):$13.20
MOQ:1,000
Mult:1,000
SPQ:1,000
Cap (Cover), Dust, 12-Pin, MTA-156 Series
Available Stock
1,000
Estimated Ship Time:4-5 working days
500+$0.2888
1,000+$0.284
2,000+$0.2779
- +
Ext. Price(USD):$144.40
MOQ:500
Mult:500
SPQ:500
Hardware Kit, MTC Series
Pre-order
12,400
Factory Lead Time:22-26 weeks
124+$110.75
250+$97.75
500+$90.425
1,000+$81.8625
- +
Ext. Price(USD):$13,733.00
MOQ:124
Mult:124
Yazaki
ECAD Model:
Wire Seal with Blue
Available Stock
24,860
Estimated Ship Time:3-5 working days
25+
1+$0.0438
10,000+$0.0347
20,000+$0.0231
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:20,000
Polarization Device (Key, Plug, Terminal), AMPMODU Connector
Pre-order
3,500,000
Factory Lead Time:22-26 weeks
35,000+$0.85
- +
Ext. Price(USD):$29,750.00
MOQ:35,000
Mult:35,000
SPQ:35,000
SSD 4P R/H Connector
Available Stock
20,554
Estimated Ship Time:4-6 working days
1+$0.0193
1,000+$0.0175
- +
Ext. Price(USD):$0.01
MOQ:1
Mult:1
SPQ:1
GET 27P Cover Assy
Available Stock
293
Estimated Ship Time:6-7 working days
17+
20+$0.365
150+$0.1893
- +
Ext. Price(USD):$7.30
MOQ:20
Mult:20
Yazaki
ECAD Model:
Wire Seal with Red
Available Stock
11,866
Estimated Ship Time:4-6 working days
1+$0.0588
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
20-Pin Clip, Mini Mi II 54596 Series, Bracket Mount, 16.35mm L × 7.4mm H
Available Stock
54
Estimated Ship Time:3-5 working days
08+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
30-Pin Shell, CRC Series, Front Panel Mount, Panel Mount, 19.6mm H
Pre-order
1,300
Factory Lead Time:22-26 weeks
13+$11.55
35+$11.3375
500+$9.1
1,000+$8.6625
- +
Ext. Price(USD):$150.15
MOQ:13
Mult:13
Yazaki
ECAD Model:
Accessory, Fixed Clip
Available Stock
4
Estimated Ship Time:4-6 working days
1+$0.0664
1,000+$0.061
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:1
8-Pin PCB Frame DuoPlug Mark II PCB Connectors, PCB Mount
Pre-order
5,200,000
Factory Lead Time:22-26 weeks
52,000+$0.4875
500,000+$0.4375
1,000,000+$0.4125
- +
Ext. Price(USD):$25,350.00
MOQ:52,000
Mult:52,000
SPQ:52,000
Cap (Cover), Dust MTA-100 Series, 27-Pin, 68.58mm L × 10.03mm H
Pre-order
7,500
Factory Lead Time:22-26 weeks
75+$1.05
300+$0.975
500+$0.8
1,000+$0.6875
2,500+$0.65
- +
Ext. Price(USD):$78.75
MOQ:75
Mult:75
SPQ:75
Available Stock
703
Estimated Ship Time:4-6 working days
21+
1+$0.0297
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
9-Pin Cable Holder Ribbon Cables Wire Mount
Available Stock
10,000
Estimated Ship Time:7-9 working days
19+
603+$0.0968
7,000+$0.0935
- +
Ext. Price(USD):$58.37
MOQ:603
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
364
Estimated Ship Time:6-12 working days
25+$0.7338
50+$0.7338
1,000+$0.634
2,500+$0.634
- +
Ext. Price(USD):$24.21
MOQ:33
Mult:1
60-Pin Lever Bracket Mount, Threaded Mount, TH, Panel Mount
Available Stock
210
Estimated Ship Time:6-7 working days
26+
70+$0.1122
- +
Ext. Price(USD):$7.85
MOQ:70
Mult:70
Molex
ECAD Model:
Molex Terminal Locking Strip, Micro-Fit TPA Series
Available Stock
51,200
Estimated Ship Time:3-5 working days
26+
3,200+$0.1254
6,400+$0.1222
9,600+$0.119
- +
Ext. Price(USD):$401.28
MOQ:3,200
Mult:3,200
SPQ:3,200
8-Pin Cap (Cover), Strain Relief MTA-156 Series
Available Stock
5,025
Estimated Ship Time:7-9 working days
23+
250+$0.495
750+$0.484
1,300+$0.473
2,500+$0.462
- +
Ext. Price(USD):$123.75
MOQ:250
Mult:1
SPQ:1
TE Connectivity Interface Seal, MATE-N-LOK Series
Available Stock
3,500
Estimated Ship Time:4-5 working days
500+$1.0574
1,000+$1.0395
2,000+$1.0171
- +
Ext. Price(USD):$528.70
MOQ:500
Mult:500
SPQ:4,000
Yazaki
ECAD Model:
58 Connectors Y Type Wire Seal
Available Stock
1,910
Estimated Ship Time:6-7 working days
26+
20+$0.4322
500+$0.1823
- +
Ext. Price(USD):$8.64
MOQ:20
Mult:20
28-Pin Dust Cap Cover
Pre-order
80,000
Factory Lead Time:22-26 weeks
800+$1.775
1,600+$1.5875
2,500+$1.3375
5,000+$1.225
10,000+$1.0625
- +
Ext. Price(USD):$1,420.00
MOQ:800
Mult:800
SPQ:800
3M
ECAD Model:
Ejector Latch, Long, 3000 Series
Available Stock
460
Estimated Ship Time:6-12 working days
25+$0.4656
50+$0.4656
500+$0.4097
1,000+$0.4097
- +
Ext. Price(USD):$24.21
MOQ:52
Mult:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
98
Estimated Ship Time:6-12 working days
10+$1.1191
25+$1.1191
1,000+$0.9669
2,500+$0.9669
- +
Ext. Price(USD):$24.62
MOQ:22
Mult:1
25 / PageGoto