Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
PBT, UL94V-0, Natural
Available Stock
20,000
Estimated Ship Time:8-12 working days
22+
10,000+$0.0342
- +
Ext. Price(USD):$342.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.28
10,000+$0.2713
25,000+$0.225
- +
Ext. Price(USD):$1,680.00
MOQ:6,000
Mult:6,000
Molex
ECAD Model:
Mini-Fit Sr Series Connector 10-Pin Retention Key Wire Mount
Available Stock
1,650
Estimated Ship Time:3-5 working days
1,500+$0.8347
- +
Ext. Price(USD):$1,252.05
MOQ:1,500
Mult:1,500
SPQ:1
Samtec
ECAD Model:
50-Pin Cap (Cover) 49.78mm L
Available Stock
378
Estimated Ship Time:6-12 working days
10+$1.0523
100+$0.9646
500+$0.9646
1,000+$0.9646
- +
Ext. Price(USD):$24.20
MOQ:23
Mult:1
14-Pin Terminal Position Assurance (TPA) Economy Power Series
Pre-order
840,000
Factory Lead Time:22-26 weeks
8,400+$0.1163
25,000+$0.1
100,000+$0.0775
- +
Ext. Price(USD):$976.92
MOQ:8,400
Mult:8,400
6-Pin Strain Relief
Available Stock
831
Estimated Ship Time:7-9 working days
18+
400+$0.2937
950+$0.2882
1,900+$0.2838
- +
Ext. Price(USD):$117.48
MOQ:400
Mult:1
SPQ:1
Sumicon 1600 Series Connector Shell 16-Pin TH
Available Stock
75
Estimated Ship Time:5-7 working days
23+
1+$7.972
- +
Ext. Price(USD):$7.97
MOQ:1
Mult:1
SPQ:10
Amphenol
ECAD Model:
6-Pin Boot AT Series™
Available Stock
5
Estimated Ship Time:4-6 working days
1+$0.332
500+$0.2773
- +
Ext. Price(USD):$0.33
MOQ:1
Mult:1
11-Pin Terminal Position Assurance (TPA) Economy Power II Housing
Available Stock
5,700
Estimated Ship Time:6-7 working days
24+
300+$0.0651
- +
Ext. Price(USD):$19.53
MOQ:300
Mult:300
Yazaki
ECAD Model:
Connector Accessory, Front Holder
Available Stock
3,236
Estimated Ship Time:6-7 working days
25+
20+$0.0943
1,000+$0.0421
- +
Ext. Price(USD):$1.88
MOQ:20
Mult:20
Shield, MTC Series
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$33.025
500+$31.6375
1,000+$28.075
- +
Ext. Price(USD):$8,256.25
MOQ:250
Mult:250
Yazaki
ECAD Model:
Connector Housing
Available Stock
1,857
Estimated Ship Time:3-5 working days
25+
1+$0.2476
50+$0.1858
100+$0.1238
- +
Ext. Price(USD):$0.24
MOQ:1
Mult:1
SPQ:10,000
12-Pin Cap, Dust Cover
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$1.675
2,400+$1.575
2,500+$1.325
5,000+$1.2
10,000+$1.05
- +
Ext. Price(USD):$2,010.00
MOQ:1,200
Mult:1,200
SPQ:1,200
TE Connectivity EconoSeal III Series Cable Seal, Automotive Connector Seal
Available Stock
1,900
Estimated Ship Time:4-6 working days
26+
1+$0.1017
1,000+$0.075
10,000+$0.0479
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:100,000
Shroud AMPMODU Mod II Series 22.6mm (L) × 8.89mm (H)
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$6.5375
- +
Ext. Price(USD):$65,375.00
MOQ:10,000
Mult:10,000
SPQ:10,000
6pin Cap (Cover), Dust ATP Series™ Plugs
Available Stock
1,200
Estimated Ship Time:7-10 working days
22+
70+$1.584
200+$1.463
500+$1.331
- +
Ext. Price(USD):$110.88
MOQ:70
Mult:1
SPQ:1
JST
ECAD Model:
12-Pin Fixture, Fixed Mount
Available Stock
3,000
Estimated Ship Time:8-12 working days
22+
1,000+$0.0461
- +
Ext. Price(USD):$46.10
MOQ:1,000
Mult:1,000
SPQ:1,000
Hardware Kit, MTC Series
Pre-order
5,000
Factory Lead Time:22-26 weeks
50+$118.45
100+$107.3625
250+$94.7625
500+$87.6625
1,000+$79.3625
- +
Ext. Price(USD):$5,922.50
MOQ:50
Mult:50
Molex
ECAD Model:
Molex Terminal Position Assurance for 172256/172258 Ultra-Fit Tangless Receptacle Housing
Available Stock
15
Estimated Ship Time:5-8 working days
26+
1+$0.1219
10+$0.1016
2,000+$0.075
8,000+$0.0715
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:8,000
Wire Seal With, Dark Brown
Available Stock
1,696
Estimated Ship Time:3-5 working days
25+
1+$0.1119
25,000+$0.084
50,000+$0.056
- +
Ext. Price(USD):$0.11
MOQ:1
Mult:1
SPQ:50,000
Deutsch Automotive Connector Plug, DT Series, 3-Pos
Available Stock
100
Estimated Ship Time:4-6 working days
22+
1+$0.7836
- +
Ext. Price(USD):$0.78
MOQ:1
Mult:1
SPQ:1,200
Conn Housing RCP 16 POS 2.2mm Crimp ST Cable Mount Black Box Automotive
Available Stock
1
Estimated Ship Time:4-6 working days
23+
1+$0.9407
400+$0.6938
800+$0.4431
- +
Ext. Price(USD):$0.94
MOQ:1
Mult:1
SPQ:1,200
Molex
ECAD Model:
3-Pin Wedgelock ML-XT 93445 Housings
Available Stock
27,024
Estimated Ship Time:7-9 working days
19+
532+$0.11
6,000+$0.1045
12,000+$0.1001
- +
Ext. Price(USD):$58.52
MOQ:532
Mult:1
SPQ:1
Mounting Clip, AT Series
Available Stock
297
Estimated Ship Time:6-12 working days
10+$1.792
100+$1.76
500+$1.728
1,000+$1.728
2,500+$1.728
- +
Ext. Price(USD):$25.08
MOQ:14
Mult:1
Molex
ECAD Model:
Molex Connector Mounting Bracket
Available Stock
310
Estimated Ship Time:4-6 working days
1+$0.1219
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:1
25 / PageGoto