Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Hirose Connector Blind Mate, Polarization Key, A3 Series, For Pitch Micro Connectors
Available Stock
40
Estimated Ship Time:6-7 working days
20+$0.0866
- +
Ext. Price(USD):$1.73
MOQ:20
Mult:20
38-Pin Shroud, Mini CT Series
Available Stock
3,000
Estimated Ship Time:4-6 working days
300+$0.1275
- +
Ext. Price(USD):$38.25
MOQ:300
Mult:300
SPQ:300
Molex
ECAD Model:
Cap, Wire 560151/560152 Series, 36.4mm L × 55.6mm H
Available Stock
1,820
Estimated Ship Time:3-5 working days
24+
260+$0.4513
520+$0.4399
780+$0.4284
- +
Ext. Price(USD):$117.33
MOQ:260
Mult:260
SPQ:260
Molex
ECAD Model:
6-Pin Backshell Mega-Fit Receptacles Free Hanging
Available Stock
1,105
Estimated Ship Time:6-12 working days
10+$0.8718
100+$0.7992
2,000+$0.7847
3,000+$0.7847
- +
Ext. Price(USD):$26.15
MOQ:30
Mult:10
10-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
1,500
Estimated Ship Time:4-5 working days
250+$0.2837
500+$0.2788
1,000+$0.2729
- +
Ext. Price(USD):$70.92
MOQ:250
Mult:250
SPQ:2,000
2-Pin Retainer HVA 280 Series, Bracket Mount, 27.2mm L
Available Stock
3
Estimated Ship Time:4-6 working days
18+
1+$1.2712
250+$0.9376
500+$0.5988
- +
Ext. Price(USD):$1.27
MOQ:1
Mult:1
SPQ:500
Rear Housing MTC Series
Pre-order
500
Factory Lead Time:22-26 weeks
5+$2,055.7625
10+$1,438.0125
50+$925.1
100+$781.2125
250+$719.5125
- +
Ext. Price(USD):$10,278.81
MOQ:5
Mult:5
SPQ:5
Hot Wire Signal Grace Inertia TPA Enables Inertial Locking Mechanism, Forms Circuit Loop and Locks Connector, Ideal Insertion Reliability, Prevents Mating Errors
Available Stock
24,000
Estimated Ship Time:4-5 working days
6,000+$0.0224
12,000+$0.0219
24,000+$0.0215
- +
Ext. Price(USD):$134.40
MOQ:6,000
Mult:6,000
SPQ:18,000
Molex
ECAD Model:
14-Pin TPA Terminal, 201196/201200 Series
Available Stock
6,116
Estimated Ship Time:6-7 working days
22+
20+$0.2739
200+$0.1165
- +
Ext. Price(USD):$5.47
MOQ:20
Mult:20
8-Pin Shroud AMPMODU MTE Series, 22.47mm L
Pre-order
3,000
Factory Lead Time:22-26 weeks
30+$2.0875
200+$1.7625
400+$1.65
800+$1.5625
- +
Ext. Price(USD):$62.62
MOQ:30
Mult:30
3-Pin Terminal Position Assurance (TPA) Economy Power II Housings
Available Stock
25,200
Estimated Ship Time:4-6 working days
720+$0.0148
1,440+$0.0145
2,880+$0.0142
- +
Ext. Price(USD):$10.65
MOQ:720
Mult:720
SPQ:36,000
Molex
ECAD Model:
36-Pin Shroud C-Grid SL Series, Wire Mount
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$2.7375
1,200+$2.4
3,000+$2.35
- +
Ext. Price(USD):$1,368.75
MOQ:500
Mult:500
7-Pin TPA Grace Inertia Connectors
Available Stock
348,000
Estimated Ship Time:4-6 working days
4,000+$0.0212
- +
Ext. Price(USD):$84.80
MOQ:4,000
Mult:4,000
SPQ:4,000
TE Connectivity Stress Relief, Universal MATE-N-LOK Series, For Housing Cover Adapter
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.4625
25,000+$0.4375
100,000+$0.4125
- +
Ext. Price(USD):$4,625.00
MOQ:10,000
Mult:10,000
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.3338
2,500+$0.31
5,000+$0.2963
10,000+$0.2863
25,000+$0.2388
- +
Ext. Price(USD):$333.80
MOQ:1,000
Mult:1,000
Yazaki
ECAD Model:
Connector, TPA, 3-Way, Light Brown
Available Stock
1
Estimated Ship Time:4-6 working days
1+$0.0972
1,000+$0.0887
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:1
Cap (Cover), Dust MTA-100 Series 28-Pin 71.12mm L × 10.03mm H
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$0.85
500+$0.8125
1,000+$0.7
2,500+$0.6625
5,000+$0.6375
- +
Ext. Price(USD):$106.25
MOQ:125
Mult:125
SPQ:125
Shield Plate 10-Pin GT32 Series Board Mount
Available Stock
5,000
Estimated Ship Time:4-6 working days
20+
1,000+$0.7969
2,000+$0.7836
4,000+$0.7637
- +
Ext. Price(USD):$796.90
MOQ:1,000
Mult:1,000
SPQ:1,000
104-Pin Hardware Kit TH
Available Stock
298
Estimated Ship Time:3-5 working days
25+
1+$77.2295
10+$68.3478
20+$59.4278
- +
Ext. Price(USD):$77.22
MOQ:1
Mult:1
SPQ:20
21-Pin Cap (Cover), Strain Relief MTA-100 Series
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.925
2,000+$0.875
2,500+$0.8125
5,000+$0.7875
10,000+$0.75
- +
Ext. Price(USD):$462.50
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
38-Pin Shroud 92.82mm L × 38.68mm H
Available Stock
1,500
Estimated Ship Time:3-5 working days
25+
300+$0.3135
600+$0.3055
900+$0.2975
- +
Ext. Price(USD):$94.05
MOQ:300
Mult:300
SPQ:300
Yazaki
ECAD Model:
Connector TPA 3-Way Brown
Available Stock
7,541
Estimated Ship Time:4-6 working days
1+$0.1073
1,000+$0.098
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:1
60-Pin Cap (Cover) AMPMODU 50/50 Grid Series
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$2.2125
- +
Ext. Price(USD):$11,062.50
MOQ:5,000
Mult:5,000
SPQ:5,000
19-Pin Cap (Cover), Dust MTA-156 Series, 12.07mm H
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.6125
1,000+$0.5
2,000+$0.425
25,000+$0.3875
50,000+$0.335
- +
Ext. Price(USD):$306.25
MOQ:500
Mult:500
SPQ:500
3-Pin Commoning Bar, Commercial MATE-N-LOK Series
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.1725
20,000+$0.1625
25,000+$0.155
- +
Ext. Price(USD):$1,725.00
MOQ:10,000
Mult:10,000
SPQ:10,000
25 / PageGoto