Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
DMC-MD Series Connectors
Available Stock
5,204
Estimated Ship Time:5-7 working days
25+
1,000+$1.9747
2,000+$1.9747
4,000+$1.9747
- +
Ext. Price(USD):$1,974.70
MOQ:1,000
Mult:1,000
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
90
Estimated Ship Time:6-12 working days
25+$0.915
50+$0.8784
1,000+$0.7906
2,500+$0.7906
- +
Ext. Price(USD):$24.70
MOQ:27
Mult:1
Hirose Holder, EnerBee DF33C Series
Pre-order
50,000
Factory Lead Time:14-26 weeks
5,000+$0.0494
- +
Ext. Price(USD):$247.00
MOQ:5,000
Mult:100
SPQ:100
Yazaki
ECAD Model:
Connector TPA 2-Way Black
Available Stock
200
Estimated Ship Time:3-5 working days
25+
1+$0.2409
100+$0.1807
200+$0.1204
- +
Ext. Price(USD):$0.24
MOQ:1
Mult:1
SPQ:5,000
Shield HVP 800 Series
Pre-order
11,200
Factory Lead Time:22-26 weeks
112+$15.875
224+$14.175
- +
Ext. Price(USD):$1,778.00
MOQ:112
Mult:112
SPQ:112
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
1,300
Estimated Ship Time:6-7 working days
20+$0.0973
- +
Ext. Price(USD):$1.94
MOQ:20
Mult:20
Amphenol
ECAD Model:
34-Pin Strain Relief, Quickie™ Series
Pre-order
4,320
Factory Lead Time:10-16 weeks
24+
432+$0.4551
648+$0.4433
- +
Ext. Price(USD):$196.60
MOQ:432
Mult:216
SPQ:216
19-Pin Cap (Cover), Dust MTA-156 Series
Pre-order
20,000
Factory Lead Time:22-26 weeks
200+$0.3463
500+$0.215
1,000+$0.1888
25,000+$0.1688
50,000+$0.1475
- +
Ext. Price(USD):$69.26
MOQ:200
Mult:200
Orange Car Connector Housing Sealing Seal
Available Stock
145,915
Estimated Ship Time:3-5 working days
26+
1+$0.0627
1,000+$0.0471
20,000+$0.0329
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:20,000
28-Pin Connector Holder CT Series
Available Stock
4,030
Estimated Ship Time:3-5 working days
19+
100+$0.1753
500+$0.1695
600+$0.165
- +
Ext. Price(USD):$17.53
MOQ:100
Mult:1
SPQ:500
Aptiv
ECAD Model:
Delphi Metri-Pack 280 Series Connector Lock, Auxiliary Lock
Available Stock
27
Estimated Ship Time:5-7 working days
26+
1+$0.3139
1,000+$0.2251
4,100+$0.1426
- +
Ext. Price(USD):$0.31
MOQ:1
Mult:1
SPQ:4,100
HARTING
ECAD Model:
PCB Connector, Connector, For Connector
Available Stock
48
Estimated Ship Time:6-12 working days
10+$1.261
25+$1.261
500+$1.0895
2,500+$1.0895
- +
Ext. Price(USD):$25.22
MOQ:20
Mult:1
AMPMODU Mod IV Series Cap (Cover), 12-Pin, 24.7mm L
Pre-order
400,000
Factory Lead Time:22-26 weeks
4,000+$0.7375
5,000+$0.6125
250,000+$0.37
500,000+$0.3425
- +
Ext. Price(USD):$2,950.00
MOQ:4,000
Mult:4,000
JST
ECAD Model:
Available Stock
939
Estimated Ship Time:6-7 working days
20+$0.4558
- +
Ext. Price(USD):$9.11
MOQ:20
Mult:20
Aptiv
ECAD Model:
Available Stock
60,000
Estimated Ship Time:4-6 working days
25+
2,000+$0.046
- +
Ext. Price(USD):$92.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Molex
ECAD Model:
Wire Seal, Mizu-P38 Series
Pre-order
10,000,000
Factory Lead Time:22-26 weeks
100,000+$0.0238
200,000+$0.0208
500,000+$0.0204
- +
Ext. Price(USD):$2,380.00
MOQ:100,000
Mult:100,000
Wire Clamp Mini CT Series, 22-Pin Clip Mount, Wire Mount
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$13.4625
10,000+$12.925
500,000+$9.9625
1,000,000+$8.8875
- +
Ext. Price(USD):$67,312.50
MOQ:5,000
Mult:5,000
Single Wire Seal Wire Mount 9mm × 9mm × 7.8mm
Available Stock
1,385
Estimated Ship Time:3-5 working days
25+
1+$0.0821
2,500+$0.0616
5,000+$0.041
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:5,000
Molex
ECAD Model:
Wire Seal CMC Connectors, Adhesive Mount, Wire Mount, 7.5mm L
Available Stock
64,330
Estimated Ship Time:7-9 working days
21+
1,516+$0.077
3,800+$0.0748
50,000+$0.066
120,000+$0.0583
- +
Ext. Price(USD):$116.73
MOQ:1,516
Mult:1
SPQ:1
Aptiv
ECAD Model:
Connector Accessories Seal Straight Red/Brown
Available Stock
7,182
Estimated Ship Time:3-5 working days
26+
1+$0.0733
1,250+$0.054
2,500+$0.0342
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:2,500
Molex
ECAD Model:
Connector Shroud 6-Pin C-Grid SL Series Bracket Mount 11.83mm L × 19.05mm H
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.0875
- +
Ext. Price(USD):$3,262.50
MOQ:3,000
Mult:3,000
SPQ:3,000
8-Pin Gasket, Mini-Universal MATE-N-LOK Series, 18.01mm L × 9.68mm H
Available Stock
5,000
Estimated Ship Time:4-6 working days
1,000+$0.3743
2,000+$0.368
4,000+$0.36
- +
Ext. Price(USD):$374.30
MOQ:1,000
Mult:1,000
SPQ:1,000
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.3213
2,500+$0.2988
5,000+$0.285
10,000+$0.2763
25,000+$0.23
- +
Ext. Price(USD):$642.60
MOQ:2,000
Mult:2,000
Molex
ECAD Model:
Molex Crimp Pin, 201196 Series
Available Stock
30
Estimated Ship Time:6-7 working days
20+$0.1382
- +
Ext. Price(USD):$2.76
MOQ:20
Mult:20
Connector 6-Pin Shroud Wire Mount 11.3mm (L) × 13mm (H)
Pre-order
4,000,000
Factory Lead Time:15 weeks
8,000+$0.3969
- +
Ext. Price(USD):$3,175.20
MOQ:8,000
Mult:1,000
SPQ:1,000
25 / PageGoto