Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
22-Pin TPA Economy Power Housings, Panel Mount
Available Stock
17,200
Estimated Ship Time:5-7 working days
21+
1,800+$0.0688
4,500+$0.0675
9,000+$0.0663
17,200+$0.0638
- +
Ext. Price(USD):$123.84
MOQ:1,800
Mult:1
SPQ:1
Molex
ECAD Model:
13-Pin Shroud C-Grid SL Series Wire Mount 49.37mm L × 8.12mm H
Pre-order
30,000
Factory Lead Time:22-26 weeks
300+$1.3125
600+$1.225
1,200+$1.15
2,500+$1
5,000+$0.925
- +
Ext. Price(USD):$393.75
MOQ:300
Mult:300
SPQ:300
Cap Cover, 21-Pin, 18.94mm Length
Pre-order
400,000
Factory Lead Time:22-26 weeks
4,000+$2.675
5,000+$2.5125
10,000+$2.4375
25,000+$2.1625
50,000+$1.9625
- +
Ext. Price(USD):$10,700.00
MOQ:4,000
Mult:4,000
Cover
Available Stock
342
Estimated Ship Time:6-12 working days
1+$4.4256
10+$3.8946
500+$3.8237
1,000+$3.8237
- +
Ext. Price(USD):$26.55
MOQ:6
Mult:1
Molex
ECAD Model:
26-Pin Strain Relief Milli-Grid, 8mm H
Available Stock
59
Estimated Ship Time:3-5 working days
11+
10+$0.2535
50+$0.249
100+$0.2403
- +
Ext. Price(USD):$2.53
MOQ:10
Mult:10
SPQ:10
7-Pin Terminal Position Assurance (TPA) Economy Power II Housing 27.7114mm × 9.6mm × 2.6416mm
Available Stock
12,000
Estimated Ship Time:4-5 working days
300+$0.0972
600+$0.0955
1,200+$0.0935
- +
Ext. Price(USD):$29.16
MOQ:300
Mult:300
SPQ:12,000
17-Pin Cap (Cover), Dust, MTA-100 Series, 43.18mm L
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$0.5
1,000+$0.475
2,500+$0.4375
5,000+$0.425
10,000+$0.4125
- +
Ext. Price(USD):$125.00
MOQ:250
Mult:250
SPQ:250
TE Connectivity Connector Bracket, AMP CT Series
Available Stock
2,500
Estimated Ship Time:3-5 working days
100+$0.0796
200+$0.077
300+$0.075
- +
Ext. Price(USD):$7.96
MOQ:100
Mult:1
SPQ:200
21-Pin Cap (Cover), 18.94mm L × 12.5mm H
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$1.3875
500+$1.1625
1,000+$0.975
2,500+$0.925
5,000+$0.875
- +
Ext. Price(USD):$346.87
MOQ:250
Mult:250
SPQ:250
Connector Cover 11-Pin DF1 Series 32.5mm L × 6mm H
Available Stock
900
Estimated Ship Time:6-7 working days
19+
100+$0.1082
- +
Ext. Price(USD):$10.82
MOQ:100
Mult:100
34-Pin Strain Relief Minitek™
Pre-order
4,200
Factory Lead Time:10-16 weeks
24+
420+$0.8858
630+$0.8627
- +
Ext. Price(USD):$372.03
MOQ:420
Mult:210
SPQ:210
26-Pin Shield, Micro Quadlok Series
Available Stock
905
Estimated Ship Time:7-9 working days
21+
200+$0.583
500+$0.572
- +
Ext. Price(USD):$116.60
MOQ:200
Mult:1
SPQ:1
JST
ECAD Model:
40-Pin Retainer Clip PND Series, Fixed Mount
Available Stock
975
Estimated Ship Time:6-7 working days
20+$0.3037
- +
Ext. Price(USD):$6.07
MOQ:20
Mult:20
Cover For Mqs Hsg 2X16 Pos Assy
Available Stock
1,600
Estimated Ship Time:4-6 working days
800+$0.2407
1,600+$0.2366
3,200+$0.2315
- +
Ext. Price(USD):$192.56
MOQ:800
Mult:800
SPQ:4,000
3M
ECAD Model:
34-Pin Polarizing Device (Key, Plug, Post), 300cm × 114.3mm × 132.08mm
Available Stock
7,452
Estimated Ship Time:6-12 working days
50+$0.3165
100+$0.3038
250+$0.2836
500+$0.2836
1,000+$0.2836
- +
Ext. Price(USD):$24.05
MOQ:76
Mult:1
60-Pin Cap (Cover), Front AMPMODU MT Series, 19.05mm H
Pre-order
220,000
Factory Lead Time:22-26 weeks
2,200+$1.9375
5,000+$1.75
50,000+$1.4625
100,000+$1.3625
- +
Ext. Price(USD):$4,262.50
MOQ:2,200
Mult:2,200
Molex
ECAD Model:
3-Pin Retainer, 51111/51112 Series, Fixed Mount
Available Stock
615
Estimated Ship Time:6-7 working days
20+$0.0355
- +
Ext. Price(USD):$0.71
MOQ:20
Mult:20
Molex
ECAD Model:
Clip, Polarized, 2.54mm Pitch, 20-Way
Available Stock
35
Estimated Ship Time:3-5 working days
10+
1+$1.7924
30+$1.7623
50+$1.7005
- +
Ext. Price(USD):$1.79
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
20-Pin Strain Relief QF 50 Series Bracket Mount, Wire Mount, Threaded Mount 30.03mm L × 3.9mm H
Available Stock
30
Estimated Ship Time:3-5 working days
11+
10+$0.1085
50+$0.1065
100+$0.1028
- +
Ext. Price(USD):$1.08
MOQ:10
Mult:10
SPQ:10
Available Stock
1,000
Estimated Ship Time:3-5 working days
23+
1,000+$0.0083
2,000+$0.0081
3,000+$0.0079
- +
Ext. Price(USD):$8.30
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
22-Pin Strain Relief Milli-Grid 8mm H
Pre-order
115,000
Factory Lead Time:22-26 weeks
1,150+$0.115
- +
Ext. Price(USD):$132.25
MOQ:1,150
Mult:1,150
15-Pin Cap (Cover), Dust MTA-100 Series 38.1mm(L) × 10.03mm(H)
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$0.3663
1,000+$0.3463
2,500+$0.3213
5,000+$0.3063
10,000+$0.295
- +
Ext. Price(USD):$91.57
MOQ:250
Mult:250
SPQ:250
TE Connectivity Stress Relief for AMPLATCH Series
Available Stock
37,500
Estimated Ship Time:4-5 working days
250+$0.0946
500+$0.0929
1,000+$0.091
- +
Ext. Price(USD):$23.65
MOQ:250
Mult:250
SPQ:80,000
11-Pin Cap (Cover), Dust, MTA-100 Series
Pre-order
26,800
Factory Lead Time:22-26 weeks
268+$0.2763
1,000+$0.2613
2,500+$0.2413
5,000+$0.23
10,000+$0.2225
- +
Ext. Price(USD):$74.04
MOQ:268
Mult:268
SPQ:268
DF22 Series Retainer, 3-Pin, Fixed Mount
Available Stock
269
Estimated Ship Time:6-7 working days
23+
20+$0.2833
100+$0.147
- +
Ext. Price(USD):$5.66
MOQ:20
Mult:20
25 / PageGoto