Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Yazaki
ECAD Model:
Wire Seal with Black
Available Stock
25
Estimated Ship Time:6-7 working days
20+$0.4671
- +
Ext. Price(USD):$9.34
MOQ:20
Mult:20
Rear Housing MTC Series
Pre-order
100
Factory Lead Time:22-26 weeks
1+$3,565.425
10+$2,494.0125
500+$1,140.9375
1,000+$1,033.975
- +
Ext. Price(USD):$3,565.42
MOQ:1
Mult:1
10-Pin Backshell AMPMODU MT Series
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$15.7625
50+$13.2625
100+$11.1375
5,000+$7.8625
10,000+$7.4625
- +
Ext. Price(USD):$394.06
MOQ:25
Mult:25
SPQ:25
Amphenol
ECAD Model:
Polarizing Device (Key, Plug, Post), Quickie™ Series
Available Stock
2,292
Estimated Ship Time:7-9 working days
21+
150+$0.396
1,500+$0.385
3,000+$0.374
- +
Ext. Price(USD):$59.40
MOQ:150
Mult:1
SPQ:1
Molex
ECAD Model:
16-Pin Gasket, MX150L Series, Flange Mount, 83.83mm × 30.48mm × 30.48mm
Pre-order
96,000
Factory Lead Time:22-26 weeks
960+$0.5875
2,000+$0.5
- +
Ext. Price(USD):$564.00
MOQ:960
Mult:960
Seals and Cavity Plugs CABLE SEAL ASSY
Available Stock
768
Estimated Ship Time:6-7 working days
23+
192+$2.4452
- +
Ext. Price(USD):$469.47
MOQ:192
Mult:192
2pin Cap (Cover), Strain Relief MTA-156 Series, 7.92mm L × 11.18mm H
Available Stock
7,000
Estimated Ship Time:4-6 working days
500+$0.1355
- +
Ext. Price(USD):$67.75
MOQ:500
Mult:500
SPQ:500
Yazaki
ECAD Model:
Available Stock
2,707
Estimated Ship Time:6-7 working days
23+
20+$0.6161
100+$0.2903
- +
Ext. Price(USD):$12.32
MOQ:20
Mult:20
12-Pin Strain Relief MR (Miniature Rectangular) Series
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$2.75
5,000+$2.7125
10,000+$2.425
25,000+$2.0875
50,000+$1.95
- +
Ext. Price(USD):$275.00
MOQ:100
Mult:100
JST
ECAD Model:
20-Pin Retainer Clip, PND Series, Fixed Mount
Available Stock
777
Estimated Ship Time:6-7 working days
20+$0.135
- +
Ext. Price(USD):$2.70
MOQ:20
Mult:20
Available Stock
1
Estimated Ship Time:4-6 working days
1+$0.4721
800+$0.3482
1,600+$0.2224
- +
Ext. Price(USD):$0.47
MOQ:1
Mult:1
SPQ:1,600
2-Pin Terminal Position Assurance (TPA), SGI Series
Available Stock
62
Estimated Ship Time:4-6 working days
1+$0.1286
500+$0.0949
1,000+$0.0605
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:1,000
AMPMODU MT Series Cover Cap, 26-Pin, 33.02mm L × 7.49mm H
Pre-order
50,000
Factory Lead Time:25-42 weeks
500+$1.1502
- +
Ext. Price(USD):$575.10
MOQ:500
Mult:1
SPQ:1
Available Stock
30,319
Estimated Ship Time:3-5 working days
26+
1+$0.2313
200+$0.1735
4,000+$0.1157
- +
Ext. Price(USD):$0.23
MOQ:1
Mult:1
SPQ:4,000
JST
ECAD Model:
Cover
Available Stock
8,709
Estimated Ship Time:6-7 working days
24+
20+$0.1966
1,000+$0.0687
- +
Ext. Price(USD):$3.93
MOQ:20
Mult:20
1pin Backshell DMC-MD Inserts, Clip Mount, Wire Mount, Threaded Mount
Available Stock
1
Estimated Ship Time:6-12 working days
1+$27.4122
5+$25.5847
10+$25.5847
- +
Ext. Price(USD):$27.41
MOQ:1
Mult:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
2
Estimated Ship Time:4-6 working days
1+$0.3487
200+$0.2927
- +
Ext. Price(USD):$0.34
MOQ:1
Mult:1
30-Pin Cap (Cover) AMPMODU 50/50 Grid Series
Available Stock
250
Estimated Ship Time:5-7 working days
20+
45+$3.2938
150+$3.2264
250+$3.1723
- +
Ext. Price(USD):$148.22
MOQ:45
Mult:1
SPQ:1
Double Lock Plate, Single Row Power Triple Clock
Available Stock
7,000
Estimated Ship Time:4-5 working days
3,500+$0.1486
7,000+$0.146
14,000+$0.1429
- +
Ext. Price(USD):$520.10
MOQ:3,500
Mult:3,500
SPQ:3,500
Connector Cap (Cover), Front, AMPMODU MT Series, 16-Pin
Available Stock
1,959
Estimated Ship Time:7-9 working days
12+
55+$2.112
150+$2.079
300+$2.046
550+$2.002
- +
Ext. Price(USD):$116.16
MOQ:55
Mult:1
SPQ:1
10-Pin Shroud AMPMODU MTE Series Wire Mount 17.39mm L × 11.76mm H
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$1.45
10,000+$1.375
25,000+$1.3125
- +
Ext. Price(USD):$7,250.00
MOQ:5,000
Mult:5,000
SPQ:5,000
JST
ECAD Model:
Available Stock
165
Estimated Ship Time:6-7 working days
20+$0.1501
- +
Ext. Price(USD):$3.00
MOQ:20
Mult:20
TPA Terminal Positioning Clip, Dual Lock Signal Device with Plug and Cap to Ensure Proper Seating
Available Stock
4,643
Estimated Ship Time:6-7 working days
25+
20+$0.0628
400+$0.0269
- +
Ext. Price(USD):$1.25
MOQ:20
Mult:20
Amphenol
ECAD Model:
10-Pin Strain Relief Quickie Series 17.08mm L
Pre-order
140,760
Factory Lead Time:10-16 weeks
24+
14,076+$0.2765
14,382+$0.2692
- +
Ext. Price(USD):$3,892.01
MOQ:14,076
Mult:306
SPQ:306
TPA Power Connector with Plug & Cap, Dual Locking, Ensures Full Terminal Insertion
Available Stock
37
Estimated Ship Time:6-7 working days
20+$0.0476
- +
Ext. Price(USD):$0.95
MOQ:20
Mult:20
25 / PageGoto