Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
391
Estimated Ship Time:6-12 working days
25+$0.7738
50+$0.7428
1,000+$0.6685
2,500+$0.6685
- +
Ext. Price(USD):$24.76
MOQ:32
Mult:1
15-Pin Shroud, AMPMODU MTE Series
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$3.0625
50+$2.5875
100+$2.1625
5,000+$1.525
10,000+$1.45
- +
Ext. Price(USD):$76.56
MOQ:25
Mult:25
SPQ:25
17-Pin Cap (Cover), Strain Relief, MTA-156 Series, 67.36mm L
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.4125
10,000+$0.32
- +
Ext. Price(USD):$825.00
MOQ:2,000
Mult:2,000
7-Pin PCB Frame DuoPlug Mark II PCB Connector, PCB Mount
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$0.5125
25,000+$0.45
50,000+$0.425
500,000+$0.3875
1,000,000+$0.3613
- +
Ext. Price(USD):$6,150.00
MOQ:12,000
Mult:12,000
SPQ:12,000
JST
ECAD Model:
IDC Connector F 12POS 1.5mm IDT RA Cable Mount Box
Available Stock
17,965
Estimated Ship Time:6-7 working days
22+
20+$0.1687
1,000+$0.0592
- +
Ext. Price(USD):$3.37
MOQ:20
Mult:20
Shield Plate 10-Pin GT32 Series Board Mount
Available Stock
4,000
Estimated Ship Time:4-6 working days
20+
1,000+$0.4781
2,000+$0.4702
4,000+$0.4582
- +
Ext. Price(USD):$478.10
MOQ:1,000
Mult:1,000
SPQ:1,000
Z-Type Markers
Pre-order
400,000
Factory Lead Time:22-26 weeks
4,000+$0.0196
10,000+$0.0146
- +
Ext. Price(USD):$78.40
MOQ:4,000
Mult:4,000
SPQ:4,000
Contact SKT Crimp TPA, Orange
Available Stock
30,000
Estimated Ship Time:3-5 working days
26+
100+$0.0354
200+$0.0345
300+$0.0336
- +
Ext. Price(USD):$3.54
MOQ:100
Mult:100
SPQ:100
MATE-N-LOK II Series Spacer, 6-Pin
Available Stock
25,000
Estimated Ship Time:4-5 working days
1,000+$0.2712
2,000+$0.2665
4,000+$0.2608
- +
Ext. Price(USD):$271.20
MOQ:1,000
Mult:1,000
SPQ:25,000
Mounting Clip AT Series™, 33mm L
Available Stock
2,230
Estimated Ship Time:4-6 working days
1+$0.7704
1,200+$0.644
- +
Ext. Price(USD):$0.77
MOQ:1
Mult:1
Molex
ECAD Model:
15-Pin Retainer, Fixed Mount, 5.45mm H
Available Stock
8
Estimated Ship Time:3-5 working days
10+
1+$0.2155
50+$0.2118
100+$0.2043
- +
Ext. Price(USD):$0.21
MOQ:1
Mult:1
SPQ:1
20-Pin Dust Cap (Cap), Dustproof MTA-156 Series
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$0.7125
250+$0.6125
500+$0.5
1,000+$0.45
25,000+$0.4
- +
Ext. Price(USD):$89.06
MOQ:125
Mult:125
SPQ:125
Molex
ECAD Model:
14-Pin Retainer, Panel Mount
Available Stock
50
Estimated Ship Time:3-5 working days
10+
10+$0.0935
50+$0.0919
100+$0.0886
- +
Ext. Price(USD):$0.93
MOQ:10
Mult:10
SPQ:10
Phoenix Contact Mounting Bracket, Panel Mount Frame, IC-DFR Series, For COMBICON Connectors
Available Stock
36
Estimated Ship Time:4-6 working days
24+
1+$1.1224
- +
Ext. Price(USD):$1.12
MOQ:1
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
96
Estimated Ship Time:6-12 working days
10+$1.1446
25+$1.1446
500+$0.9889
2,500+$0.9889
- +
Ext. Price(USD):$24.03
MOQ:21
Mult:1
Polarizing Device (Key, Plug, Post) Box Series, External Mount
Pre-order
200
Factory Lead Time:22-26 weeks
2+$37.1375
11+$32.3875
22+$30.7875
46+$29.3625
200+$28.0625
- +
Ext. Price(USD):$74.27
MOQ:2
Mult:2
SPQ:2
Molex
ECAD Model:
3pin Shroud C-Grid SL Series Wire Mount 8.12mm H
Available Stock
91
Estimated Ship Time:3-5 working days
09+
1+$1.8915
30+$1.8598
50+$1.7947
- +
Ext. Price(USD):$1.89
MOQ:1
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
99
Estimated Ship Time:6-12 working days
10+$1.1786
25+$1.1786
1,000+$1.0183
2,500+$1.0183
- +
Ext. Price(USD):$24.75
MOQ:21
Mult:1
Amphenol
ECAD Model:
16-Pin Strain Relief, Quickie™ Series
Pre-order
6,000,000
Factory Lead Time:7 weeks
12,000+$0.7225
- +
Ext. Price(USD):$8,670.00
MOQ:12,000
Mult:800
SPQ:800
Molex
ECAD Model:
Connector Accessories 4POS Terminal Position Assurance Natural Nylon Bag
Available Stock
2
Estimated Ship Time:4-6 working days
19+
1+$0.2471
- +
Ext. Price(USD):$0.24
MOQ:1
Mult:1
SPQ:1
Cap Cover Dust MTC Series
Pre-order
15,000
Factory Lead Time:22-26 weeks
150+$11.75
300+$10.5
500+$9.3125
1,000+$8.55
- +
Ext. Price(USD):$1,762.50
MOQ:150
Mult:150
SPQ:150
Molex
ECAD Model:
6-Pin TPA Connector, L1NK 396-207458, 7.6mm H
Available Stock
25
Estimated Ship Time:4-6 working days
1+$0.0659
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:1
Neutrik
ECAD Model:
HAND TOOL, POWERCON TRUE1 CONNECTORS;
Available Stock
10
Estimated Ship Time:6-12 working days
1+$63.1633
5+$62.0354
50+$60.9075
100+$60.9075
- +
Ext. Price(USD):$63.16
MOQ:1
Mult:1
Rear Housing MTC Series
Pre-order
500
Factory Lead Time:22-26 weeks
5+$1,748.8625
10+$1,223.35
50+$787
100+$664.5625
250+$612.1125
- +
Ext. Price(USD):$8,744.31
MOQ:5
Mult:5
SPQ:5
Connector 6-Pin Terminal Position Assurance (TPA) Grace Inertia
Available Stock
4,475
Estimated Ship Time:3-5 working days
19+
100+$0.0215
200+$0.0208
300+$0.0203
- +
Ext. Price(USD):$2.15
MOQ:100
Mult:1
SPQ:200
25 / PageGoto