Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
6-Pin Terminal Position Assurance (TPA) Ultra-Fit Series
Available Stock
232
Estimated Ship Time:4-6 working days
1+$0.0738
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1
375 CLIP(58L)
Available Stock
9,483
Estimated Ship Time:4-6 working days
1+$0.0474
1,000+$0.0435
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
Yazaki
ECAD Model:
Available Stock
18,286
Estimated Ship Time:3-5 working days
26+
1+$0.066
3,000+$0.0496
6,000+$0.033
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:24,000
JAE
ECAD Model:
36-Pin Cap (Cover), Front MX23A Series
Available Stock
1,500
Estimated Ship Time:4-6 working days
1,500+$1.3635
- +
Ext. Price(USD):$2,045.25
MOQ:1,500
Mult:1,500
SPQ:1,500
14-Pin AMP-LATCH Strain Relief Wire Mount 6.1mm H
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$10.025
5,000+$9.2375
10,000+$8.9875
- +
Ext. Price(USD):$20,050.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Sato Parts
ECAD Model:
Available Stock
100
Estimated Ship Time:14-17 working days
10+$4.1306
30+$3.5579
200+$2.9512
300+$2.9378
- +
Ext. Price(USD):$53.69
MOQ:13
Mult:1
SPQ:1
Molex
ECAD Model:
18-Pin Shroud C-Grid SL Series, Clip Mount
Available Stock
25
Estimated Ship Time:3-5 working days
07+
1+$1.7381
30+$1.7088
50+$1.6489
- +
Ext. Price(USD):$1.73
MOQ:1
Mult:1
SPQ:1
Seals and Cavity Plugs
Available Stock
12,000
Estimated Ship Time:4-6 working days
1,000+$0.425
- +
Ext. Price(USD):$425.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
6pin Strain Relief Mini-Fit Jr Series
Available Stock
49
Estimated Ship Time:3-5 working days
06+
10+$0.6085
50+$0.5982
100+$0.5772
- +
Ext. Price(USD):$6.08
MOQ:10
Mult:10
SPQ:10
TE Connectivity Automotive Connector Seal, Heavy Duty Sealed Connector Series (HDSCS), Wire Seal, White
Available Stock
9,975
Estimated Ship Time:3-5 working days
10+$0.0134
- +
Ext. Price(USD):$0.13
MOQ:10
Mult:1
Molex
ECAD Model:
19-Pin Terminal Position Assurance (TPA) 201196, 201200 Series
Pre-order
320,000
Factory Lead Time:22-26 weeks
3,200+$0.1463
8,000+$0.1275
20,000+$0.125
- +
Ext. Price(USD):$468.16
MOQ:3,200
Mult:3,200
Plug, Sealing, Adhesive Mount
Available Stock
20,000
Estimated Ship Time:4-5 working days
1,000+$0.0481
2,000+$0.0473
4,000+$0.0463
- +
Ext. Price(USD):$48.10
MOQ:1,000
Mult:1,000
SPQ:40,000
Bus Bar, MTC Series
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$94.0625
250+$60.4125
500+$51.9875
1,000+$40.7375
- +
Ext. Price(USD):$9,406.25
MOQ:100
Mult:100
Guide Module, UPM Series, 34.2mm L
Available Stock
1,334
Estimated Ship Time:5-9 working days
22+
5+$2.8471
15+$2.354
30+$2.3144
- +
Ext. Price(USD):$14.23
MOQ:5
Mult:1
SPQ:72
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Pre-order
3,200
Factory Lead Time:22-26 weeks
32+$2.2625
100+$1.8125
1,000+$1.7
- +
Ext. Price(USD):$72.40
MOQ:32
Mult:32
SPQ:32
2-Pin Cap (Cover), Dust ATM Series Plugs
Available Stock
2,468
Estimated Ship Time:4-6 working days
1+$0.5827
100+$0.4827
- +
Ext. Price(USD):$0.58
MOQ:1
Mult:1
Amphenol
ECAD Model:
Amphenol Industrial Cable Connector Protective Cover, AT Series, 4-Way, Receptacle
Available Stock
2,713
Estimated Ship Time:4-6 working days
1+$0.264
200+$0.2123
- +
Ext. Price(USD):$0.26
MOQ:1
Mult:1
JST
ECAD Model:
Connector Accessories 15 POS 2mm Housing Retainer Straight Polyamide 66 Ivory Bag
Available Stock
1,405
Estimated Ship Time:6-7 working days
20+$0.127
- +
Ext. Price(USD):$2.54
MOQ:20
Mult:20
Harwin
ECAD Model:
HARWIN Connector Housing, 20 Pos, 2mm Pitch, 2 Rows
Available Stock
92
Estimated Ship Time:6-12 working days
1+$4.074
10+$3.5851
500+$3.5199
1,000+$3.5199
- +
Ext. Price(USD):$24.44
MOQ:6
Mult:1
Available Stock
600
Estimated Ship Time:4-6 working days
1+$1.007
- +
Ext. Price(USD):$1.00
MOQ:1
Mult:1
SPQ:1
3-Pin Cap Cover Housing MCP Series 22.7mm L
Available Stock
2,400
Estimated Ship Time:4-6 working days
600+$0.0739
1,200+$0.0727
2,400+$0.0712
- +
Ext. Price(USD):$44.34
MOQ:600
Mult:600
SPQ:3,000
Backshell MTC Series 63.5mm L × 304.8mm H
Pre-order
500
Factory Lead Time:22-26 weeks
5+$1,469.5
10+$1,027.9125
500+$470.2375
1,000+$426.1625
- +
Ext. Price(USD):$7,347.50
MOQ:5
Mult:5
Splice (XL)
Available Stock
450
Estimated Ship Time:4-6 working days
1+$0.0234
600+$0.0212
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Shroud C-Grid SL Series Clip Mount Free Hanging 19.05mm H
Available Stock
10
Estimated Ship Time:3-5 working days
09+
10+$1.3577
30+$1.335
50+$1.2881
- +
Ext. Price(USD):$13.57
MOQ:10
Mult:10
SPQ:10
Hirose Connector Blind Mate, Guide Pin, HIF3B Series, For Polarized Devices (Key, Plug, Post)
Available Stock
1,997
Estimated Ship Time:14-17 working days
100+$0.348
300+$0.2617
5,000+$0.1831
10,000+$0.1819
- +
Ext. Price(USD):$50.11
MOQ:144
Mult:1
SPQ:1
25 / PageGoto