Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Deutsch Dust Cap for Automotive Connector, RJ45 Port, DT Series
Available Stock
4
Estimated Ship Time:4-6 working days
26+
1+$2.5424
50+$1.8752
100+$1.1976
- +
Ext. Price(USD):$2.54
MOQ:1
Mult:1
SPQ:100
Sealing Plug, Size 8, Red, FEP
Available Stock
2,475
Estimated Ship Time:6-12 working days
1+$0.4547
100+$0.4547
- +
Ext. Price(USD):$24.09
MOQ:53
Mult:1
Yazaki
ECAD Model:
Wire Seal With Light Brown
Available Stock
13,672
Estimated Ship Time:3-5 working days
25+
1+$0.0218
1,000+$0.0164
2,000+$0.0109
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:20,000
Available Stock
18,824
Estimated Ship Time:4-6 working days
1+$0.0321
1,000+$0.0293
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Yazaki
ECAD Model:
Available Stock
18,517
Estimated Ship Time:6-7 working days
20+
20+$1.0755
100+$0.4262
- +
Ext. Price(USD):$21.51
MOQ:20
Mult:20
66-Pin Position Lock AMP-DUAC Series Connector
Pre-order
224,000
Factory Lead Time:22-26 weeks
2,240+$4.9875
5,000+$4.775
10,000+$4.3625
25,000+$4.1625
- +
Ext. Price(USD):$11,172.00
MOQ:2,240
Mult:2,240
Connector 20-Pin Shield DF36 Series Board Mount
Pre-order
100,000
Factory Lead Time:14-26 weeks
10,000+$0.1801
- +
Ext. Price(USD):$1,801.00
MOQ:10,000
Mult:10,000
SPQ:10,000
26-Pin AMP-LATCH Series Wire Harness Strain Relief, Wire Mount, 12.09mm L × 7mm H
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$4.85
1,000+$4.3875
5,000+$4.0375
10,000+$3.925
- +
Ext. Price(USD):$2,425.00
MOQ:500
Mult:500
SPQ:500
Yazaki
ECAD Model:
Wire Seal with Black
Available Stock
4,949
Estimated Ship Time:3-5 working days
26+
1+$0.1188
5,000+$0.0891
10,000+$0.0595
- +
Ext. Price(USD):$0.11
MOQ:1
Mult:1
SPQ:10,000
Amphenol
ECAD Model:
30-Pin Strain Relief Quickie™ Series 53.48mm L
Pre-order
4,680
Factory Lead Time:10-16 weeks
24+
468+$0.4063
702+$0.3957
- +
Ext. Price(USD):$190.14
MOQ:468
Mult:234
SPQ:234
TE Connectivity Connector Seal, Junior Power Timer Series, Interface Seal
Available Stock
2
Estimated Ship Time:3-5 working days
12+
1+$0.3281
30+$0.3226
50+$0.3112
- +
Ext. Price(USD):$0.32
MOQ:1
Mult:1
SPQ:1
JST
ECAD Model:
JST Fixture, VL Series, For VL Series
Available Stock
4,000
Estimated Ship Time:6-7 working days
25+
1,000+$0.0519
- +
Ext. Price(USD):$51.90
MOQ:1,000
Mult:1,000
JST
Package:-
ECAD Model:
2-Pin Retainer, PNI Series, Fixed Mount, 6.3mm L × 2.25mm H
Available Stock
8,260
Estimated Ship Time:4-6 working days
1+$0.0265
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Yazaki
ECAD Model:
TPA Connector, 2-Way, Natural
Available Stock
440
Estimated Ship Time:3-5 working days
25+
1+$0.2312
5,000+$0.1734
10,000+$0.1156
- +
Ext. Price(USD):$0.23
MOQ:1
Mult:1
SPQ:20,000
Molex
ECAD Model:
Connector 18-Pin Shroud C-Grid SL Series Wire Mount 62.07mm L × 8.12mm H
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$1.6625
500+$1.525
1,000+$1.45
2,500+$1.2625
5,000+$1.1625
- +
Ext. Price(USD):$415.62
MOQ:250
Mult:250
SPQ:250
Amphenol
ECAD Model:
12-Pin Boot AT Series™
Available Stock
796
Estimated Ship Time:4-6 working days
1+$0.4317
400+$0.3697
- +
Ext. Price(USD):$0.43
MOQ:1
Mult:1
40-Pin Terminator
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$462.9
- +
Ext. Price(USD):$46,290.00
MOQ:100
Mult:100
SPQ:100
12-Pin Cap (Cover), Protective, ATM Series
Available Stock
139
Estimated Ship Time:6-12 working days
1+$3.0875
10+$2.7664
500+$2.6676
1,000+$2.6676
- +
Ext. Price(USD):$24.70
MOQ:8
Mult:1
Amphenol
ECAD Model:
Latch
Pre-order
10,000
Factory Lead Time:10-16 weeks
24+
1,000+$0.3895
2,000+$0.3793
- +
Ext. Price(USD):$389.50
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
2pin Terminal Position Assurance (TPA) 201644,201647 Series Fixed Mount 6.29mm H
Available Stock
430
Estimated Ship Time:4-6 working days
1+$0.1005
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), AMP-DUAC Series
Pre-order
7,500,000
Factory Lead Time:25-42 weeks
75,000+$0.1421
- +
Ext. Price(USD):$10,657.50
MOQ:75,000
Mult:500
SPQ:500
12-Pin Terminal Position Assurance (TPA) Connector, Grace Inertia
Available Stock
2,414
Estimated Ship Time:6-7 working days
25+
20+$0.0619
1,200+$0.0283
- +
Ext. Price(USD):$1.23
MOQ:20
Mult:20
Boot, MTC Series
Available Stock
25
Estimated Ship Time:7-9 working days
19+
3+$53.768
6+$52.844
11+$51.92
21+$50.985
- +
Ext. Price(USD):$161.30
MOQ:3
Mult:1
SPQ:1
24-Pin Strain Relief, Minitek
Pre-order
5,600
Factory Lead Time:10-16 weeks
24+
560+$0.7606
840+$0.7408
- +
Ext. Price(USD):$425.93
MOQ:560
Mult:280
SPQ:280
Molex
ECAD Model:
6-Pin Terminal Position Assurance (TPA) Ultra-Fit Series
Available Stock
232
Estimated Ship Time:4-6 working days
1+$0.0738
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1
25 / PageGoto