Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Yazaki
ECAD Model:
Wire Seal, Black NBR
Available Stock
20,237
Estimated Ship Time:4-6 working days
23+
1+$0.0373
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Polarizing Key Straight Nylon Natural Mini-Fit Jr™ Bag
Available Stock
7
Estimated Ship Time:3-5 working days
19+
1+$0.5975
30+$0.5818
50+$0.5613
- +
Ext. Price(USD):$0.59
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot AT Series™
Available Stock
1,902
Estimated Ship Time:4-6 working days
1+$0.3652
200+$0.3081
- +
Ext. Price(USD):$0.36
MOQ:1
Mult:1
JST
ECAD Model:
Retainer 5-Pin XMA Series Bracket Mount
Available Stock
3,000
Estimated Ship Time:4-6 working days
1,000+$0.0596
- +
Ext. Price(USD):$59.60
MOQ:1,000
Mult:1,000
SPQ:1,000
Available Stock
249
Estimated Ship Time:4-6 working days
1+$13.8674
- +
Ext. Price(USD):$13.86
MOQ:1
Mult:1
SPQ:1
Available Stock
40,000
Estimated Ship Time:4-6 working days
5,000+$0.0791
10,000+$0.0778
20,000+$0.0761
- +
Ext. Price(USD):$395.50
MOQ:5,000
Mult:5,000
SPQ:5,000
50-Pin Latch DF81 Series
Pre-order
100,000
Factory Lead Time:14-26 weeks
10,000+$0.1419
- +
Ext. Price(USD):$1,419.00
MOQ:10,000
Mult:10,000
SPQ:10,000
8-Pin PCB Frame DuoPlug Mark II PCB Connectors, PCB Mount
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.625
4,000+$0.5875
25,000+$0.5125
50,000+$0.4875
500,000+$0.4375
- +
Ext. Price(USD):$1,250.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Molex
ECAD Model:
30-Pin Shell CRC Series Panel Mount 19.6mm H
Available Stock
465
Estimated Ship Time:7-9 working days
17+
10+$12.738
23+$12.507
46+$12.287
92+$12.067
240+$10.967
- +
Ext. Price(USD):$127.38
MOQ:10
Mult:1
SPQ:1
TE Connectivity Automotive Connector Seal, Quadlock Series, Hollow Plug, White
Available Stock
160,000
Estimated Ship Time:3-5 working days
26+
20,000+$0.0263
40,000+$0.0259
60,000+$0.0254
- +
Ext. Price(USD):$526.00
MOQ:20,000
Mult:20,000
SPQ:20,000
JST
ECAD Model:
Retainer 4-Pin XMA Series Bracket Mount
Available Stock
16,405
Estimated Ship Time:6-7 working days
25+
20+$0.0581
1,000+$0.0212
- +
Ext. Price(USD):$1.16
MOQ:20
Mult:20
Molex
ECAD Model:
Molex TPA Retainer for Micro-One Receptacle Housing
Available Stock
27,000
Estimated Ship Time:5-7 working days
23+
1,887+$0.0756
5,000+$0.0742
10,000+$0.0729
19,000+$0.0715
- +
Ext. Price(USD):$142.65
MOQ:1,887
Mult:1
SPQ:1
Aptiv
ECAD Model:
Connector, Type: Accessories
Available Stock
52,836
Estimated Ship Time:4-6 working days
1+$0.029
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Backshell, MTC100 Series
Pre-order
100
Factory Lead Time:22-26 weeks
1+$395.2125
2+$371.625
250+$158.175
500+$143.525
- +
Ext. Price(USD):$395.21
MOQ:1
Mult:1
28-Pin Cap (Cover), Strain Relief MTA-100 Series
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.9375
2,000+$0.9
2,500+$0.825
5,000+$0.8
10,000+$0.7625
- +
Ext. Price(USD):$468.75
MOQ:500
Mult:500
SPQ:500
Heavy Duty Power Connector H24B-AGS
Available Stock
1,090
Estimated Ship Time:3-5 working days
25+
1+$5.9796
- +
Ext. Price(USD):$5.97
MOQ:1
Mult:1
Molex
ECAD Model:
6-Pin Backshell MX120 Series
Available Stock
233
Estimated Ship Time:6-7 working days
20+$0.3782
- +
Ext. Price(USD):$7.56
MOQ:20
Mult:20
Yazaki
ECAD Model:
Single Wire Seal Yellow
Available Stock
10,004
Estimated Ship Time:4-6 working days
1+$0.1318
1,000+$0.12
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:1
Sumicon 1600 Series Connector Bracket 60-Pin 67mm L
Available Stock
100
Estimated Ship Time:5-7 working days
25+
1+$1.0986
- +
Ext. Price(USD):$1.09
MOQ:1
Mult:1
SPQ:20
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
96
Estimated Ship Time:6-12 working days
25+$0.9775
50+$0.9384
1,000+$0.8446
2,500+$0.8446
- +
Ext. Price(USD):$24.43
MOQ:25
Mult:1
Amphenol
ECAD Model:
Bootloader 8-Pin ATM Series
Available Stock
285
Estimated Ship Time:6-12 working days
10+$1.0588
25+$1.0588
1,000+$0.9148
2,500+$0.9148
- +
Ext. Price(USD):$24.35
MOQ:23
Mult:1
Available Stock
175,533
Estimated Ship Time:4-6 working days
1+$0.031
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
17-Pin Terminal Position Assurance (TPA) 201196, 201200 Series
Pre-order
1,920,000
Factory Lead Time:22-26 weeks
19,200+$0.1238
40,000+$0.1075
100,000+$0.105
- +
Ext. Price(USD):$2,376.96
MOQ:19,200
Mult:19,200
Conn Accessories, Wire Crimp, Box
Available Stock
4
Estimated Ship Time:3-5 working days
1+$0.4702
5+$0.4582
- +
Ext. Price(USD):$0.47
MOQ:1
Mult:1
Aptiv
ECAD Model:
Wire Seal, Green
Available Stock
49,870
Estimated Ship Time:4-6 working days
1+$0.0265
1,000+$0.0247
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
25 / PageGoto