Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Samtec
ECAD Model:
16-Pin Cap (Cover), 28.19mm L × 8.76mm H
Available Stock
330
Estimated Ship Time:6-13 working days
1+$1.9205
50+$1.419
5,000+$0.7517
10,000+$0.6988
- +
Ext. Price(USD):$15.36
MOQ:8
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) MR (Miniature Rectangular) Series
Available Stock
7,948
Estimated Ship Time:7-9 working days
13+
150+$0.803
400+$0.792
800+$0.781
1,600+$0.77
- +
Ext. Price(USD):$120.45
MOQ:150
Mult:1
SPQ:1
Amphenol
ECAD Model:
30-Pin Strain Relief, Quickie™ Series
Available Stock
3,207
Estimated Ship Time:7-9 working days
22+
228+$0.484
1,023+$0.462
2,046+$0.451
- +
Ext. Price(USD):$110.35
MOQ:228
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, TH
Available Stock
204
Estimated Ship Time:9-14 working days
1+$44.2044
10+$37.571
100+$31.9402
250+$29.9433
- +
Ext. Price(USD):$44.20
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
DITTO POSITIVE LOCK TPA 1X6 V-0 HT
Available Stock
24,480
Estimated Ship Time:7-9 working days
19+
550+$0.1089
650+$0.1001
9,600+$0.0924
10,000+$0.0891
- +
Ext. Price(USD):$59.89
MOQ:550
Mult:1
SPQ:1
TE Connectivity Sealing Cover, Universal MATE-N-LOK Series
Available Stock
15,784
Estimated Ship Time:6-13 working days
25+$0.4727
100+$0.4312
5,000+$0.3132
10,000+$0.311
- +
Ext. Price(USD):$14.18
MOQ:30
Mult:1
SPQ:1
Plug, Sealing Electronic Control Module, Sealed Connectors (ECMSC) Series, Adhesive Mount
Available Stock
1,230
Estimated Ship Time:7-9 working days
13+
400+$0.3058
900+$0.3003
- +
Ext. Price(USD):$122.32
MOQ:400
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
12-Pin Shroud Trident Rectangular Receptacle
Available Stock
2,000
Estimated Ship Time:7-9 working days
21+
18+$3.201
88+$3.135
100+$2.959
200+$2.42
500+$2.046
- +
Ext. Price(USD):$57.61
MOQ:18
Mult:1
SPQ:1
Universal I/O Pin Connector Stress Relief, Ribbon Cable Assembly, Glass-Filled Polyester, Lock Hook, 10-64 Pins
Available Stock
2,793
Estimated Ship Time:7-9 working days
18+
30+$3.96
70+$3.894
150+$3.828
300+$3.762
1,000+$3.421
- +
Ext. Price(USD):$118.80
MOQ:30
Mult:1
SPQ:1
Deutsch Heat Shrink, Straight, Plastic, For 1 Cable
Available Stock
1,652
Estimated Ship Time:6-13 working days
1+$4.4505
10+$3.509
1,000+$2.3004
2,500+$2.2464
- +
Ext. Price(USD):$17.80
MOQ:4
Mult:1
SPQ:1
3-Pin Terminal Position Assurance (TPA) SGI Series
Available Stock
14,126
Estimated Ship Time:6-13 working days
100+$0.0874
250+$0.0782
5,000+$0.0616
10,000+$0.0583
- +
Ext. Price(USD):$14.07
MOQ:161
Mult:1
SPQ:1
Molex
ECAD Model:
26-Pin Shroud C-Grid SL Series Wire Mount 11.176mm W × 27.56mm H
Available Stock
5,590
Estimated Ship Time:7-9 working days
23+
60+$1.958
150+$1.925
1,600+$1.584
4,000+$1.54
- +
Ext. Price(USD):$117.48
MOQ:60
Mult:1
SPQ:1
TE Connectivity Automotive Connector Receptacle MQS Series 12 Channel
Available Stock
1,407
Estimated Ship Time:5-12 working days
50+$0.6545
250+$0.5981
8,400+$0.5222
11,200+$0.5173
- +
Ext. Price(USD):$32.72
MOQ:50
Mult:1
SPQ:1,400
Harwin
ECAD Model:
24-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
102
Estimated Ship Time:9-14 working days
1+$136.9656
10+$116.4251
25+$109.1422
50+$103.9394
100+$98.9866
- +
Ext. Price(USD):$136.96
MOQ:1
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
4,302
Estimated Ship Time:7-9 working days
20+
500+$0.2486
1,500+$0.2442
2,500+$0.2398
4,000+$0.2299
- +
Ext. Price(USD):$124.30
MOQ:500
Mult:1
SPQ:1
Sleeve
Available Stock
1,328
Estimated Ship Time:7-9 working days
15+
350+$0.352
1,000+$0.1738
- +
Ext. Price(USD):$123.20
MOQ:350
Mult:1
SPQ:1
24-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
91
Estimated Ship Time:5-12 working days
10+$2.1275
100+$1.903
5,000+$1.1663
7,500+$1.1556
- +
Ext. Price(USD):$31.91
MOQ:15
Mult:1
TPA (Terminal Position Assurance) Black Glass-Filled PBT Power Versa-Lock 5.0
Available Stock
57,200
Estimated Ship Time:7-9 working days
22+
3,300+$0.0528
7,700+$0.0484
11,000+$0.0462
26,400+$0.044
- +
Ext. Price(USD):$174.24
MOQ:3,300
Mult:1,100
SPQ:1,100
Connector Terminal 5-Pin TPA Universal MATE-N-LOK Series
Available Stock
59,274
Estimated Ship Time:7-9 working days
20+
1,400+$0.0737
10,000+$0.0715
50,000+$0.0693
- +
Ext. Price(USD):$103.18
MOQ:1,400
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot, ATM Series
Available Stock
387
Estimated Ship Time:6-13 working days
10+$1.0063
25+$0.9787
2,800+$0.6264
5,200+$0.6242
- +
Ext. Price(USD):$14.08
MOQ:14
Mult:1
SPQ:1
19-Pin Cap (Cover), Strain Relief MTA-156 Series
Available Stock
1,290
Estimated Ship Time:7-9 working days
14+
250+$0.528
750+$0.462
1,250+$0.451
- +
Ext. Price(USD):$132.00
MOQ:250
Mult:125
SPQ:125
Connector Accessories Protection Cover Straight Transparent
Available Stock
63
Estimated Ship Time:9-14 working days
1+$44.6796
10+$37.9717
100+$32.2803
250+$30.2621
- +
Ext. Price(USD):$44.67
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
23-Pin Shroud C-Grid SL Series, Wire Mount, 74.77mm L × 8.12mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Locking Slide AMPMODU Mod IV Series
Available Stock
16,278
Estimated Ship Time:7-9 working days
11+
500+$0.2431
1,200+$0.2398
2,300+$0.2354
4,600+$0.231
- +
Ext. Price(USD):$121.55
MOQ:500
Mult:1
SPQ:1
Molex
ECAD Model:
Molex SL Terminal Position Assurance 73838-0006
Available Stock
7,661
Estimated Ship Time:7-9 working days
16+
663+$0.176
1,700+$0.1727
3,400+$0.1694
6,700+$0.1672
- +
Ext. Price(USD):$116.68
MOQ:663
Mult:1
SPQ:1
25 / PageGoto