Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
TE Connectivity Stress Relief, 641776 Series, For General MATE-N-LOK Connectors
Available Stock
2,835
Estimated Ship Time:7-10 working days
26+
95+$1.188
250+$1.056
2,000+$0.979
250,000+$0.924
- +
Ext. Price(USD):$112.86
MOQ:95
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Cap (Cover), ePower Series
Available Stock
10
Estimated Ship Time:9-14 working days
1+$107.6112
10+$91.4695
25+$85.7477
50+$81.6597
100+$77.7682
- +
Ext. Price(USD):$107.61
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
26-Pin Strain Relief 451 Series
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
25-Pin Housing
Available Stock
500
Estimated Ship Time:7-9 working days
20+
40+$3.102
90+$3.047
200+$2.981
400+$2.926
500+$2.871
- +
Ext. Price(USD):$124.08
MOQ:40
Mult:1
SPQ:1
Molex
ECAD Model:
Polarizing Device (Key, Plug, Post) KK Series 2.54mm H
Available Stock
49,000
Estimated Ship Time:5-12 working days
5,000+$0.0189
10,000+$0.0176
200,000+$0.0131
400,000+$0.0123
- +
Ext. Price(USD):$94.50
MOQ:5,000
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Rear Cover, Mega-Fit Series, For 170001 Mega-Fit Socket Housing
Available Stock
1,200
Estimated Ship Time:7-9 working days
16+
193+$0.605
500+$0.594
1,000+$0.583
1,200+$0.561
- +
Ext. Price(USD):$116.76
MOQ:193
Mult:1
SPQ:1
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Available Stock
218
Estimated Ship Time:6-13 working days
1+$4.945
10+$4.015
1,000+$2.7864
2,500+$2.6136
- +
Ext. Price(USD):$14.83
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Terminal Position Assurance Retainer Straight Nylon White Mini-Fit Jr™ Bag
Available Stock
12,800
Estimated Ship Time:7-9 working days
26+
1,600+$0.1045
3,200+$0.1023
75,000+$0.0825
150,000+$0.0781
- +
Ext. Price(USD):$167.20
MOQ:1,600
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Stress Relief, Stress Elimination Connector, QF 50 Series, For 5320/90170/90635 Series
Available Stock
23,769
Estimated Ship Time:7-9 working days
17+
1,250+$0.0462
14,000+$0.044
- +
Ext. Price(USD):$57.75
MOQ:1,250
Mult:1
SPQ:1
Strain Relief 15-Pin MR (Miniature Rectangular) Series
Available Stock
670
Estimated Ship Time:6-13 working days
1+$7.6705
10+$6.336
1,000+$4.3848
2,000+$4.1148
- +
Ext. Price(USD):$15.34
MOQ:2
Mult:1
SPQ:1
10-Pin AMP-LATCH Series, Wire Mount, Stress Relief
Available Stock
5,716
Estimated Ship Time:7-9 working days
22+
85+$1.353
250+$1.331
2,000+$1.254
5,000+$1.155
- +
Ext. Price(USD):$115.00
MOQ:85
Mult:1
SPQ:1
Aptiv
ECAD Model:
LOCK SECONDARY TPA 5 BLU
Available Stock
1,435
Estimated Ship Time:6-13 working days
25+$0.2576
50+$0.2473
2,500+$0.1868
5,000+$0.1577
- +
Ext. Price(USD):$14.09
MOQ:57
Mult:1
SPQ:1
70pin Cap (Cover) AMPMODU 50/50 Grid Series
Available Stock
427
Estimated Ship Time:7-9 working days
13+
30+$4.125
70+$4.048
150+$3.982
300+$3.905
- +
Ext. Price(USD):$123.75
MOQ:30
Mult:1
SPQ:1
Connector Accessory Cover Black
Available Stock
57
Estimated Ship Time:5-12 working days
10+$3.3925
50+$3.102
1,000+$2.7606
2,500+$2.675
- +
Ext. Price(USD):$33.92
MOQ:10
Mult:10
SPQ:10
126-Pin Plug, Sealing Mount
Available Stock
3,954
Estimated Ship Time:7-9 working days
21+
200+$0.704
- +
Ext. Price(USD):$140.80
MOQ:200
Mult:1
SPQ:1
EMI Backshell DMC-MD Inserts
Available Stock
5
Estimated Ship Time:7-9 working days
14+
2+$74.734
4+$73.348
- +
Ext. Price(USD):$149.46
MOQ:2
Mult:1
SPQ:1
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
6,089
Estimated Ship Time:7-9 working days
19+
1,000+$0.1309
2,500+$0.1287
4,500+$0.1265
- +
Ext. Price(USD):$130.90
MOQ:1,000
Mult:250
SPQ:250
32-Pin Terminal Position Assurance (TPA) Economy Power Housing, Through Hole
Available Stock
21,076
Estimated Ship Time:7-9 working days
16+
700+$0.1606
1,800+$0.1573
3,500+$0.1551
6,900+$0.1518
- +
Ext. Price(USD):$112.42
MOQ:700
Mult:1
SPQ:1
TE Connectivity DRB Wedge Locking Device, Ensures Terminal Calibration, Anti-Misinsertion, Snap-In Mount, Essential for DRB Connectors
Available Stock
285
Estimated Ship Time:6-13 working days
1+$3.2315
10+$2.484
1,000+$1.7064
2,500+$1.6848
- +
Ext. Price(USD):$16.15
MOQ:5
Mult:1
SPQ:1
TE Connectivity DTM Tail Cap, High Protection, Allows Corrugated Tube Insertion, 180° & 90° Versions
Available Stock
6,494
Estimated Ship Time:6-13 working days
1+$2.691
10+$2.1735
2,500+$1.4796
5,000+$1.35
- +
Ext. Price(USD):$16.14
MOQ:6
Mult:1
SPQ:1
3M
ECAD Model:
Pull Tab 3000 Series, 76.2mm L × 12.7mm W
Available Stock
1,839
Estimated Ship Time:6-13 working days
1+$1.5065
10+$1.3455
2,000+$0.9428
5,000+$0.8726
- +
Ext. Price(USD):$14.80
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
42-Pin Shroud C-Grid SL Series, Bracket Mount
Available Stock
4,800
Estimated Ship Time:7-9 working days
22+
47+$2.53
150+$2.486
4,000+$1.991
8,000+$1.881
- +
Ext. Price(USD):$118.91
MOQ:47
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
8-Pin Wedgelock IT Series Connector
Available Stock
4,919
Estimated Ship Time:9-14 working days
50+$0.3182
100+$0.2517
1,000+$0.2139
2,500+$0.2005
- +
Ext. Price(USD):$26.17
MOQ:104
Mult:1
SPQ:1
Amphenol
ECAD Model:
Ejector Latch Quickie™ Series
Available Stock
4,196
Estimated Ship Time:6-13 working days
25+$0.2737
100+$0.2369
5,000+$0.1458
10,000+$0.1393
- +
Ext. Price(USD):$14.23
MOQ:52
Mult:1
SPQ:1
2-Pin Commoning Bar Commercial MATE-N-LOK Series
Available Stock
3,940
Estimated Ship Time:7-9 working days
21+
1,200+$0.0968
3,000+$0.0847
- +
Ext. Price(USD):$116.16
MOQ:1,200
Mult:1
SPQ:1
25 / PageGoto