Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
16-Pin Cap (Cover) AMPMODU MT Series
Available Stock
2,882
Estimated Ship Time:7-9 working days
22+
150+$0.781
400+$0.77
750+$0.759
1,500+$0.748
- +
Ext. Price(USD):$117.15
MOQ:150
Mult:1
SPQ:1
12-Pin Wedgelock DT-XT Series Plug
Available Stock
103
Estimated Ship Time:9-14 working days
100+$10.692
200+$10.4782
500+$10.2686
1,000+$10.0632
5,000+$9.862
- +
Ext. Price(USD):$1,069.20
MOQ:100
Mult:100
SPQ:1
Coding Key DMC-MD Inserts
Available Stock
145
Estimated Ship Time:7-10 working days
19+
8+$14.465
20+$14.223
39+$13.97
77+$13.717
- +
Ext. Price(USD):$115.72
MOQ:8
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
120
Estimated Ship Time:5-10 working days
1+$1.5295
10+$1.5041
100+$1.4276
- +
Ext. Price(USD):$7.64
MOQ:5
Mult:1
Molex
ECAD Model:
17-Pin Shroud C-Grid SL Series Wire Mount 59.53mm (L) × 8.12mm (H)
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93444 Housings, Edge Mount
Available Stock
15,000
Estimated Ship Time:7-9 working days
19+
807+$0.0726
9,000+$0.0704
- +
Ext. Price(USD):$58.58
MOQ:807
Mult:1
SPQ:1
13-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
1,936
Estimated Ship Time:6-13 working days
10+$0.9522
25+$0.8706
5,000+$0.513
10,000+$0.4882
- +
Ext. Price(USD):$14.28
MOQ:15
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
9,280
Estimated Ship Time:6-13 working days
25+$0.4784
100+$0.4356
5,000+$0.3305
10,000+$0.3164
- +
Ext. Price(USD):$14.35
MOQ:30
Mult:1
SPQ:1
Molex
ECAD Model:
7-Pin Shroud C-Grid SL Series Wire Mount 34.13mm (L) × 8.12mm (H)
Available Stock
535
Estimated Ship Time:7-9 working days
08+
127+$0.924
350+$0.913
4,000+$0.748
10,000+$0.737
- +
Ext. Price(USD):$117.34
MOQ:127
Mult:1
SPQ:1
2.5mm Sealed Connector: TPAs, Signal Double Lock Connectors
Available Stock
6,609
Estimated Ship Time:6-13 working days
25+$0.1702
100+$0.1587
5,000+$0.1177
10,000+$0.1134
- +
Ext. Price(USD):$14.12
MOQ:83
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Boot, ATM Series
Available Stock
217
Estimated Ship Time:6-13 working days
10+$0.8326
25+$0.8016
1,200+$0.648
2,800+$0.5994
- +
Ext. Price(USD):$14.15
MOQ:17
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Position Assurance (TPA)
Available Stock
616,400
Estimated Ship Time:7-9 working days
21+
2,174+$0.0264
23,000+$0.0253
48,000+$0.0242
387,000+$0.0227
- +
Ext. Price(USD):$57.39
MOQ:2,174
Mult:1
SPQ:1
TE Connectivity
ECAD Model:
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
8,385
Estimated Ship Time:6-13 working days
25+$0.368
100+$0.3289
5,000+$0.256
10,000+$0.2419
- +
Ext. Price(USD):$14.35
MOQ:39
Mult:1
SPQ:1
ASSMANN WSW IDC Tool, Pull and Insert Tool
Available Stock
2,200
Estimated Ship Time:5-10 working days
50+$0.079
- +
Ext. Price(USD):$7.11
MOQ:90
Mult:10
8-Pin Mounting Clip DT Series Bracket Mount
Available Stock
537
Estimated Ship Time:6-13 working days
1+$3.2315
10+$2.816
1,000+$2.0844
2,000+$1.9332
- +
Ext. Price(USD):$16.15
MOQ:5
Mult:1
SPQ:1
Bracket, Bracket Mount
Available Stock
39
Estimated Ship Time:5-12 working days
1+$287.705
5+$254.0287
36+$223.202
48+$222.6456
- +
Ext. Price(USD):$287.70
MOQ:1
Mult:1
SPQ:24
26-Pin Strain Relief
Available Stock
4,540
Estimated Ship Time:6-13 working days
10+$0.8154
25+$0.7268
1,000+$0.5519
2,500+$0.4784
- +
Ext. Price(USD):$14.67
MOQ:18
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Voiding Key, Straight, Syndiotactic Polystyrene, Natural, MX150L™, Bag
Available Stock
14,766
Estimated Ship Time:6-13 working days
25+$0.4623
100+$0.4202
5,600+$0.2905
10,400+$0.2851
- +
Ext. Price(USD):$14.33
MOQ:31
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Retention Key Mini-Fit Jr Series Wire Mount 5.33mm H
Available Stock
2,320
Estimated Ship Time:7-10 working days
24+
1,516+$0.0726
15,000+$0.0726
400,000+$0.0572
1,000,000+$0.0539
- +
Ext. Price(USD):$110.06
MOQ:1,516
Mult:1
SPQ:1
40-Pin Cap (Cover) 0600 Series Header SMD
Available Stock
10
Estimated Ship Time:9-14 working days
1+$6.4584
10+$5.4864
1,000+$3.9637
2,500+$3.7158
- +
Ext. Price(USD):$32.29
MOQ:5
Mult:1
SPQ:1
Frame PQ50 Series Bracket Mount
Available Stock
49
Estimated Ship Time:9-14 working days
1+$54.864
10+$46.6344
25+$43.7162
60+$41.0996
120+$39.1403
- +
Ext. Price(USD):$54.86
MOQ:1
Mult:1
SPQ:1
Available Stock
2,939
Estimated Ship Time:5-12 working days
10+$4.0825
50+$3.553
5,000+$2.4717
7,500+$2.461
- +
Ext. Price(USD):$40.82
MOQ:10
Mult:1
SPQ:1
9-Pin Mounting Base, Adhesive Mount
Available Stock
1,404
Estimated Ship Time:9-14 working days
1+$6.696
10+$5.6851
1,200+$4.0554
2,800+$3.8204
- +
Ext. Price(USD):$26.78
MOQ:4
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
5
Estimated Ship Time:5-12 working days
1+$90.1712
10+$85.921
150+$31.8432
200+$31.2119
- +
Ext. Price(USD):$90.17
MOQ:1
Mult:1
SPQ:1
3-Pin Commoning Bar, AMPMODU Mod IV Series, 4.32mm H
Available Stock
2,687
Estimated Ship Time:7-9 working days
13+
2,000+$0.0726
- +
Ext. Price(USD):$145.20
MOQ:2,000
Mult:1,000
SPQ:1,000
25 / PageGoto