Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
44-Pin Strain Relief, Quickie™ Series
Available Stock
1,134
Estimated Ship Time:5-12 working days
25+$1.2121
500+$1.0175
6,075+$0.932
8,100+$0.9181
- +
Ext. Price(USD):$30.30
MOQ:25
Mult:1
SPQ:1
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
500
Estimated Ship Time:9-14 working days
1+$11.7396
10+$9.9738
500+$7.5684
1,000+$7.2076
- +
Ext. Price(USD):$35.21
MOQ:3
Mult:1
SPQ:1
24-Pin Strain Relief MR (Miniature Rectangular) Series Board Mount 31.88mm L × 10.16mm H
Available Stock
2,165
Estimated Ship Time:7-9 working days
22+
100+$4.686
200+$4.598
300+$4.521
- +
Ext. Price(USD):$468.60
MOQ:100
Mult:100
SPQ:100
TE Connectivity Stress Relief, Metrimate Series, For Metrimate Square Plug and Socket
Available Stock
70
Estimated Ship Time:7-10 working days
26+
15+$7.832
40+$6.897
10,000+$5.577
25,000+$5.137
- +
Ext. Price(USD):$117.48
MOQ:15
Mult:1
SPQ:1
2-Pin Cap (Cover), Stress Relief, 9176 Series
Available Stock
2,154
Estimated Ship Time:6-13 working days
25+$0.4932
100+$0.437
5,000+$0.313
10,000+$0.304
- +
Ext. Price(USD):$26.63
MOQ:54
Mult:1
SPQ:1
6-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
3,054
Estimated Ship Time:5-12 working days
25+$1.3536
250+$1.1407
7,500+$0.7362
10,000+$0.6869
- +
Ext. Price(USD):$33.84
MOQ:25
Mult:1
SPQ:1
Molex
ECAD Model:
Wire Seal, Mizu-P38 Series
Available Stock
590,000
Estimated Ship Time:7-9 working days
22+
1,563+$0.0374
40,000+$0.0363
80,000+$0.0352
100,000+$0.0341
- +
Ext. Price(USD):$58.45
MOQ:1,563
Mult:1
SPQ:1
Plug, Sealing EconoSeal Series, Adhesive Mount
Available Stock
18,359
Estimated Ship Time:6-13 working days
25+$0.2128
100+$0.184
5,000+$0.1048
10,000+$0.094
- +
Ext. Price(USD):$14.04
MOQ:66
Mult:1
SPQ:1
3M
ECAD Model:
Boot Mini-Clamp Series, Clamp Mount, Threaded Mount
Available Stock
70
Estimated Ship Time:5-10 working days
1+$15.3974
10+$14.7473
25+$14.11
50+$13.154
- +
Ext. Price(USD):$15.39
MOQ:1
Mult:1
Adam Tech
ECAD Model:
16-Pin Strain Relief, FCS Series
Available Stock
830
Estimated Ship Time:9-14 working days
100+$0.1758
250+$0.1648
500+$0.1569
1,000+$0.1494
3,000+$0.1383
- +
Ext. Price(USD):$26.01
MOQ:148
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93445 Housings
Available Stock
87,228
Estimated Ship Time:7-9 working days
19+
382+$0.1529
4,000+$0.1463
9,000+$0.1397
22,000+$0.1353
68,000+$0.1298
- +
Ext. Price(USD):$58.40
MOQ:382
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
2,139
Estimated Ship Time:6-13 working days
10+$0.6797
25+$0.6222
5,000+$0.351
10,000+$0.338
- +
Ext. Price(USD):$14.27
MOQ:21
Mult:1
SPQ:1
3M
ECAD Model:
50-Pin Strain Relief 3000 Series 66.5mm (L) × 13.5mm (W)
Available Stock
442
Estimated Ship Time:6-13 working days
1+$3.0475
10+$2.599
1,000+$1.7496
2,500+$1.6416
- +
Ext. Price(USD):$15.23
MOQ:5
Mult:1
SPQ:1
15-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
1,726
Estimated Ship Time:6-13 working days
10+$0.8556
25+$0.7832
5,000+$0.4482
10,000+$0.4266
- +
Ext. Price(USD):$14.54
MOQ:17
Mult:1
SPQ:1
1-Pin Plug HVA 280 Series 29.2mm(L) × 29.7mm(H)
Available Stock
2,379
Estimated Ship Time:6-13 working days
1+$2.4725
10+$2.2425
1,000+$1.6416
2,500+$1.512
- +
Ext. Price(USD):$14.83
MOQ:6
Mult:1
SPQ:1
Backshell MTC Series Panel Mount
Available Stock
21
Estimated Ship Time:7-9 working days
10+
1+$152.009
2+$149.391
4+$146.773
8+$144.144
- +
Ext. Price(USD):$152.00
MOQ:1
Mult:1
SPQ:1
HARTING
ECAD Model:
Single Row Receptacle Connector, Har-Modular Series, Right Angle, PCB Mount
Available Stock
4
Estimated Ship Time:5-10 working days
1+$1.7717
10+$1.7207
100+$1.6443
- +
Ext. Price(USD):$7.08
MOQ:4
Mult:1
HARTING
ECAD Model:
HARTING IDC Tool, Extraction and Insertion Tool
Available Stock
150
Estimated Ship Time:5-10 working days
10+$0.3174
30+$0.311
50+$0.3034
- +
Ext. Price(USD):$9.33
MOQ:30
Mult:10
8-Pin Retainer, iBridge Ultra Female Connector
Available Stock
4,200
Estimated Ship Time:7-9 working days
20+
500+$0.2354
1,200+$0.2178
- +
Ext. Price(USD):$117.70
MOQ:500
Mult:1
SPQ:1
Pancon
ECAD Model:
Connector Accessories Strain Relief Combination Cover Straight Bag
Available Stock
5,216
Estimated Ship Time:5-12 working days
300+$0.1711
2,500+$0.129
100,000+$0.0936
150,000+$0.0927
- +
Ext. Price(USD):$51.33
MOQ:300
Mult:100
SPQ:100
Harwin
ECAD Model:
Screws, Gecko Series
Available Stock
7,275
Estimated Ship Time:9-14 working days
1+$1.469
12+$1.0233
1,008+$0.7481
2,508+$0.7014
- +
Ext. Price(USD):$26.60
MOQ:26
Mult:1
SPQ:1
25pin Cap (Cover) MCP Series 23.3mm(W) × 32.25mm(H)
Available Stock
180
Estimated Ship Time:7-9 working days
19+
50+$2.233
150+$2.189
- +
Ext. Price(USD):$111.65
MOQ:50
Mult:1
SPQ:1
EDAC
ECAD Model:
EDAC 570 Series 570-260-003 Wire Seal, For Waterproof Connector
Available Stock
2,220
Estimated Ship Time:6-13 working days
25+$0.2139
100+$0.1967
5,000+$0.1339
10,000+$0.1134
- +
Ext. Price(USD):$14.11
MOQ:66
Mult:1
SPQ:1
Molex
ECAD Model:
40-Pin Shroud C-Grid SL Series Clip Mount, Free Hanging 51.05mm (L) × 8.59mm (W)
Available Stock
13,058
Estimated Ship Time:7-9 working days
19+
49+$2.409
150+$2.365
4,000+$1.903
8,000+$1.782
- +
Ext. Price(USD):$118.04
MOQ:49
Mult:1
SPQ:1
Protective Caps for Heavy Duty Sealed Connector Interfaces, Prevents Damage from Moisture/Dirt in Harsh Environments
Available Stock
3,699
Estimated Ship Time:6-13 working days
1+$1.8285
10+$1.587
2,000+$0.9504
4,000+$0.8975
- +
Ext. Price(USD):$14.62
MOQ:8
Mult:1
SPQ:1
25 / PageGoto