Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Cap (Cover) Dust MTA-156 Series 17-Pin
Available Stock
3,529
Estimated Ship Time:7-9 working days
10+
600+$0.187
1,000+$0.1639
- +
Ext. Price(USD):$112.20
MOQ:600
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve Plug, Plastic, For 1-Wire Cable
Available Stock
1,280
Estimated Ship Time:5-10 working days
5+$1.5703
50+$1.5423
125+$1.476
250+$1.4378
500+$1.4148
- +
Ext. Price(USD):$7.85
MOQ:5
Mult:5
Gasket
Available Stock
2,108
Estimated Ship Time:7-10 working days
26+
200+$0.66
450+$0.572
900+$0.561
1,800+$0.55
- +
Ext. Price(USD):$132.00
MOQ:200
Mult:1
SPQ:1
Seal
Available Stock
4,275
Estimated Ship Time:6-13 working days
1+$2.1505
10+$1.9665
2,500+$1.3068
5,000+$1.296
- +
Ext. Price(USD):$15.05
MOQ:7
Mult:1
SPQ:1
2-Pin Strain Relief, Quadrax Series
Available Stock
640
Estimated Ship Time:7-9 working days
23+
10+$11.935
24+$11.726
300+$10.285
500+$10.109
- +
Ext. Price(USD):$119.35
MOQ:10
Mult:1
SPQ:1
26-Pin Strain Relief AMP-LATCH Series
Available Stock
2,013
Estimated Ship Time:7-9 working days
08+
35+$3.3
85+$3.245
200+$3.19
350+$3.135
- +
Ext. Price(USD):$115.50
MOQ:35
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
6
Estimated Ship Time:7-9 working days
14+
1+$156.739
2+$154.044
4+$151.338
- +
Ext. Price(USD):$156.73
MOQ:1
Mult:1
SPQ:1
36-Pin Rail Mounting Adapter, Omnimate RSV Series, Bracket Mount
Available Stock
7
Estimated Ship Time:9-14 working days
1+$7.3872
10+$6.277
1,000+$4.5355
2,500+$4.2519
- +
Ext. Price(USD):$29.54
MOQ:4
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
1+$2,004.9768
10+$1,964.8818
100+$1,925.5844
500+$1,887.0727
1,000+$1,849.3313
- +
Ext. Price(USD):$2,004.97
MOQ:1
Mult:1
SPQ:1
34-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
1,340
Estimated Ship Time:5-12 working days
10+$2.047
100+$1.837
2,500+$1.5408
5,000+$1.498
- +
Ext. Price(USD):$30.70
MOQ:15
Mult:1
SPQ:1
TE Connectivity AMPSEAL 16 Connector Housing, 12 Pos
Available Stock
34
Estimated Ship Time:5-10 working days
1+$8.4889
125+$8.3615
250+$8.183
- +
Ext. Price(USD):$8.48
MOQ:1
Mult:1
8-Pin PCB Frame DuoPlug Mark II PCB Connectors, PCB Mount
Available Stock
15,800
Estimated Ship Time:7-9 working days
19+
650+$0.1727
1,600+$0.1705
3,200+$0.1672
6,400+$0.1639
- +
Ext. Price(USD):$112.25
MOQ:650
Mult:1
SPQ:1
Elbow AMPSEAL Connector
Available Stock
103
Estimated Ship Time:9-14 working days
100+$10.692
200+$10.4782
500+$10.2686
1,000+$10.0632
5,000+$9.862
- +
Ext. Price(USD):$1,069.20
MOQ:100
Mult:100
SPQ:1
Amphenol
ECAD Model:
34-Pin Strain Relief, Quickie™ Series
Available Stock
864
Estimated Ship Time:7-10 working days
22+
286+$0.385
- +
Ext. Price(USD):$110.11
MOQ:286
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
7,822
Estimated Ship Time:6-13 working days
25+$0.4508
100+$0.4213
250+$0.3806
1,000+$0.3553
2,500+$0.3348
- +
Ext. Price(USD):$14.42
MOQ:32
Mult:1
SPQ:1
45-Pin Shell Sumicon 1600 Series Connector
Available Stock
124
Estimated Ship Time:6-13 working days
1+$9.1655
- +
Ext. Price(USD):$18.33
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Headers & Wire Housings MICROFIT TPA DR 6CKT BLACK V0
Available Stock
1,574,400
Estimated Ship Time:7-9 working days
21+
1,640+$0.0715
4,100+$0.0704
200,000+$0.0528
500,000+$0.0495
- +
Ext. Price(USD):$117.26
MOQ:1,640
Mult:1
SPQ:1
ASSMANN WSW IDC Tool, Pull and Insert Tool
Available Stock
1,814
Estimated Ship Time:5-12 working days
540+$0.0495
2,520+$0.0462
150,000+$0.0372
250,020+$0.0369
- +
Ext. Price(USD):$32.67
MOQ:660
Mult:60
SPQ:60
Amphenol
ECAD Model:
Insulator ePower Series
Available Stock
8
Estimated Ship Time:9-14 working days
1+$10.7676
10+$9.1508
500+$6.9431
1,000+$6.6121
- +
Ext. Price(USD):$32.30
MOQ:3
Mult:1
SPQ:1
Shell Connector 48-Pin PQ50S Series
Available Stock
17
Estimated Ship Time:6-13 working days
1+$27.632
10+$26.6652
100+$21.6648
250+$21.1788
- +
Ext. Price(USD):$27.63
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Polarizing Device (Key, Plug, Post) C-Grid SL Series 6.22mm × 1.37mm
Available Stock
51,174
Estimated Ship Time:7-9 working days
15+
2,273+$0.0517
40,000+$0.044
- +
Ext. Price(USD):$117.51
MOQ:2,273
Mult:1
SPQ:1
Molex
ECAD Model:
DITTO POSITIVE LOCK TPA 1X4 V-0 HT
Available Stock
22,500
Estimated Ship Time:7-9 working days
20+
650+$0.0935
750+$0.0858
3,700+$0.0847
7,300+$0.0836
12,000+$0.0792
- +
Ext. Price(USD):$60.77
MOQ:650
Mult:1
SPQ:1
Samtec
ECAD Model:
34-Pin Cap (Cover)
Available Stock
951
Estimated Ship Time:6-13 working days
1+$1.5295
50+$1.452
5,000+$0.7301
10,000+$0.5486
- +
Ext. Price(USD):$15.29
MOQ:10
Mult:1
SPQ:1
36-Pin Commoning Device, Metrimate Series, Panel Mount
Available Stock
2
Estimated Ship Time:5-12 working days
1+$133.815
5+$129.8338
78+$48.1286
104+$47.1656
- +
Ext. Price(USD):$133.81
MOQ:1
Mult:1
3M
ECAD Model:
50-Pin Carrier Center Mount, Wire Mount, Back Mount 67.56mm L
Available Stock
50
Estimated Ship Time:9-14 working days
1+$42.1524
10+$35.8225
100+$30.4534
250+$28.5493
- +
Ext. Price(USD):$42.15
MOQ:1
Mult:1
SPQ:1
25 / PageGoto