Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
26-Pin Cap (Cover), Front, AMPMODU MT Series
Available Stock
99
Estimated Ship Time:6-13 working days
1+$5.8765
10+$4.774
1,000+$3.2724
2,500+$3.078
- +
Ext. Price(USD):$17.62
MOQ:3
Mult:1
SPQ:1
3-Pin Plug, Sealing Power Versa-Lock Series
Available Stock
14,900
Estimated Ship Time:6-13 working days
25+$0.2967
100+$0.2795
5,000+$0.1706
8,000+$0.1663
- +
Ext. Price(USD):$14.24
MOQ:48
Mult:1
SPQ:1
Molex
ECAD Model:
20-Pin Shroud C-Grid SL Series, Bracket Mount, Free Hanging
Available Stock
5,561
Estimated Ship Time:7-9 working days
22+
120+$0.979
300+$0.957
1,600+$0.902
4,000+$0.792
- +
Ext. Price(USD):$117.48
MOQ:120
Mult:1
SPQ:1
Molex
ECAD Model:
Molex SL Connector Housing, 2.54mm Pitch, 16 Way, 2 Row
Available Stock
202
Estimated Ship Time:7-9 working days
26+
110+$1.001
900+$1.001
1,800+$0.957
4,000+$0.836
10,000+$0.825
- +
Ext. Price(USD):$110.11
MOQ:110
Mult:1
SPQ:1
Cap (Cover), Shell HVA 280 Series, 1-Pin, 42.8mm L × 21.9mm W
Available Stock
3,006
Estimated Ship Time:6-13 working days
1+$2.622
10+$2.231
500+$1.35
1,000+$1.2312
- +
Ext. Price(USD):$15.73
MOQ:6
Mult:1
SPQ:1
Dynamic Multi-Enclosure Outside Case, Wire-to-Wire, Metal/Plastic, IP67/IP65 with Glands
Available Stock
120
Estimated Ship Time:7-9 working days
10+
2+$101.673
3+$99.924
60+$87.648
100+$65.505
- +
Ext. Price(USD):$203.34
MOQ:2
Mult:1
SPQ:1
3M
ECAD Model:
26-Pin Strain Relief D89 Series
Available Stock
183
Estimated Ship Time:9-14 working days
25+$0.6495
50+$0.5139
1,000+$0.4158
2,500+$0.3897
- +
Ext. Price(USD):$26.20
MOQ:51
Mult:1
SPQ:1
Backshell MTC Series, Bracket Mount
Available Stock
3
Estimated Ship Time:9-14 working days
1+$827.9928
10+$703.984
- +
Ext. Price(USD):$827.99
MOQ:1
Mult:1
SPQ:1
34-Pin Shroud, Mini CT Series
Available Stock
7,519
Estimated Ship Time:7-9 working days
14+
400+$0.583
1,200+$0.572
2,000+$0.561
- +
Ext. Price(USD):$233.20
MOQ:400
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
351
Estimated Ship Time:7-9 working days
20+
5+$27.126
11+$26.048
44+$25.003
120+$24.002
- +
Ext. Price(USD):$135.63
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
38-Pin Shroud C-Grid SL Series Wire Mount 65.63mm L × 27.56mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$13.5175
100+$13.2472
500+$12.9823
1,000+$12.7226
5,000+$12.4682
- +
Ext. Price(USD):$675.87
MOQ:50
Mult:50
SPQ:1
Harwin
ECAD Model:
24-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
28
Estimated Ship Time:9-14 working days
1+$70.7076
10+$60.0977
25+$56.3367
50+$53.6505
100+$51.0926
- +
Ext. Price(USD):$70.70
MOQ:1
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
86
Estimated Ship Time:5-10 working days
1+$1.4021
10+$1.3638
100+$1.3256
- +
Ext. Price(USD):$7.01
MOQ:5
Mult:1
8-Pin Strain Relief, Minitek™
Available Stock
242
Estimated Ship Time:6-13 working days
10+$0.8292
25+$0.759
5,152+$0.4622
10,304+$0.4255
- +
Ext. Price(USD):$14.09
MOQ:17
Mult:1
SPQ:1
36-Pin Terminal Position Assurance (TPA) Economy Power Housings, Board Mount
Available Stock
11,256
Estimated Ship Time:7-9 working days
14+
2,700+$0.0792
5,400+$0.077
8,100+$0.0759
- +
Ext. Price(USD):$213.84
MOQ:2,700
Mult:1
SPQ:1
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
4,632
Estimated Ship Time:6-13 working days
10+$0.6866
25+$0.6141
5,000+$0.3694
10,000+$0.3618
- +
Ext. Price(USD):$14.41
MOQ:21
Mult:1
SPQ:1
Automotive Connectors SWS PCON21
Available Stock
1,000
Estimated Ship Time:7-10 working days
22+
60+$1.925
150+$1.892
300+$1.859
600+$1.815
1,000+$1.782
- +
Ext. Price(USD):$115.50
MOQ:60
Mult:1
SPQ:1
Cap Cover Dust MTC Series
Available Stock
3,750
Estimated Ship Time:5-12 working days
5+$7.2565
25+$6.215
1,000+$5.5854
2,500+$5.4891
- +
Ext. Price(USD):$36.28
MOQ:5
Mult:1
SPQ:1
Hirschmann Bracket, For Plug
Available Stock
820
Estimated Ship Time:5-10 working days
5+$0.5175
10+$0.5022
20+$0.4869
- +
Ext. Price(USD):$7.53
MOQ:15
Mult:5
Cap (Cover) 72-Pin
Available Stock
854
Estimated Ship Time:6-13 working days
1+$6.21
10+$5.049
270+$3.9204
360+$3.7476
- +
Ext. Price(USD):$18.63
MOQ:3
Mult:1
SPQ:1
50-Pin Shell, PQ50W Series
Available Stock
20
Estimated Ship Time:9-14 working days
1+$59.5188
10+$50.5904
100+$43.0091
250+$40.3205
- +
Ext. Price(USD):$59.51
MOQ:1
Mult:1
SPQ:1
TE Connectivity Automotive Connector Base Shell, AMP Series Accessory, 2-Channel
Available Stock
9,320
Estimated Ship Time:5-10 working days
20+$0.775
40+$0.7329
100+$0.6972
200+$0.6596
600+$0.643
- +
Ext. Price(USD):$15.50
MOQ:20
Mult:20
Molex
ECAD Model:
3-Pin Backshell MultiCat Housings
Available Stock
1,468
Estimated Ship Time:9-14 working days
1+$4.104
10+$3.4884
500+$2.646
1,000+$2.5944
- +
Ext. Price(USD):$28.72
MOQ:7
Mult:1
SPQ:1
Mounting Clip, AT Series
Available Stock
405
Estimated Ship Time:6-13 working days
1+$2.369
10+$2.0125
2,400+$1.2312
6,000+$1.1772
- +
Ext. Price(USD):$14.21
MOQ:6
Mult:1
SPQ:1
Amphenol Industrial PCB Housing, AIPXE Series, Thermoplastic, 82.55 × 101.6 × 19mm, 24-Pin
Available Stock
4,818
Estimated Ship Time:6-13 working days
1+$7.774
10+$6.325
560+$4.6764
1,050+$4.6656
- +
Ext. Price(USD):$15.54
MOQ:2
Mult:1
SPQ:1
25 / PageGoto