Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
34-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
4,028
Estimated Ship Time:7-9 working days
10+
65+$1.727
200+$1.694
350+$1.672
650+$1.639
3,500+$1.485
- +
Ext. Price(USD):$112.25
MOQ:65
Mult:1
SPQ:1
20-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
1,988
Estimated Ship Time:7-9 working days
20+
550+$0.2134
1,000+$0.187
25,000+$0.1672
50,000+$0.1463
- +
Ext. Price(USD):$117.37
MOQ:550
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), SL-156 Series
Available Stock
29,050
Estimated Ship Time:7-9 working days
13+
2,500+$0.0726
5,000+$0.0704
10,000+$0.0693
17,500+$0.0682
- +
Ext. Price(USD):$181.50
MOQ:2,500
Mult:1
SPQ:1
Metrimate Series, Screw Mount
Available Stock
3,000
Estimated Ship Time:7-9 working days
26+
26+$4.389
3,000+$4.389
- +
Ext. Price(USD):$114.11
MOQ:26
Mult:1
SPQ:1
3M
ECAD Model:
30-Pin Strain Relief, 3000 Series, 42.7mm L × 6.1mm W
Available Stock
74
Estimated Ship Time:9-14 working days
25+$0.8113
50+$0.7726
1,000+$0.6253
2,500+$0.5861
- +
Ext. Price(USD):$26.77
MOQ:33
Mult:1
SPQ:1
Amphenol
ECAD Model:
6pin Strain Relief Quickie™ Series
Available Stock
10,140
Estimated Ship Time:6-13 working days
25+$0.3565
100+$0.3289
5,184+$0.2592
10,368+$0.2311
- +
Ext. Price(USD):$14.26
MOQ:40
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Backshell, Mini-Fit Jr Series
Available Stock
4,779
Estimated Ship Time:6-13 working days
10+$1.265
25+$1.166
1,100+$0.7722
2,640+$0.743
- +
Ext. Price(USD):$15.18
MOQ:12
Mult:1
SPQ:1
Jackscrew Socket, Slotted Mini Box Connectors Bracket Mount, Threaded Mount 3.76mm L
Available Stock
29
Estimated Ship Time:9-14 working days
25+$56.7346
50+$55.5997
100+$54.4877
250+$53.398
500+$52.33
- +
Ext. Price(USD):$1,418.36
MOQ:25
Mult:25
SPQ:1
12-Pin Cap (Cover), Protective, ATM Series
Available Stock
140
Estimated Ship Time:7-9 working days
10+
70+$1.672
150+$1.551
200+$1.463
- +
Ext. Price(USD):$117.04
MOQ:70
Mult:1
SPQ:1
Mounting Clip, AT Series
Available Stock
429
Estimated Ship Time:6-13 working days
1+$2.369
10+$2.024
1,200+$1.35
2,400+$1.242
- +
Ext. Price(USD):$14.21
MOQ:6
Mult:1
SPQ:1
TE Connectivity Heavy Duty Connector Interface Seal, Power Versa-Lock 5.0 Series, 1 Pos
Available Stock
10,000
Estimated Ship Time:7-10 working days
22+
422+$0.2607
6,000+$0.2607
250,000+$0.1793
500,000+$0.1595
- +
Ext. Price(USD):$110.01
MOQ:422
Mult:1
SPQ:1
26-Pin Cap (Cover) AMPMODU Mod IV Series
Available Stock
1,159
Estimated Ship Time:7-9 working days
21+
95+$1.166
250+$1.144
500+$1.122
950+$1.1
- +
Ext. Price(USD):$110.77
MOQ:95
Mult:1
SPQ:1
Molex
ECAD Model:
Molex PCB Terminal Block, Polarized Key, KK 2560 Series, For KK Series
Available Stock
8,726
Estimated Ship Time:7-10 working days
23+
1,000+$0.0583
- +
Ext. Price(USD):$58.30
MOQ:1,000
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Backshell 204723 Series For Mini-Fit Jr Plug & Receptacle Housing
Available Stock
346
Estimated Ship Time:6-13 working days
10+$0.6831
25+$0.621
1,050+$0.4784
10,150+$0.4547
- +
Ext. Price(USD):$14.34
MOQ:21
Mult:1
SPQ:1
Ejector Latch, Short
Available Stock
7,025
Estimated Ship Time:9-14 working days
250+$0.0893
500+$0.085
1,000+$0.0809
3,000+$0.0749
- +
Ext. Price(USD):$26.07
MOQ:292
Mult:1
SPQ:1
Harwin
ECAD Model:
Bolt Datamate Thread Mount
Available Stock
12,926
Estimated Ship Time:9-14 working days
1+$0.806
12+$0.6717
1,008+$0.4081
2,508+$0.3827
- +
Ext. Price(USD):$26.34
MOQ:51
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Wire Mount
Available Stock
95
Estimated Ship Time:5-12 working days
1+$31.142
5+$28.072
100+$25.7335
250+$25.3055
- +
Ext. Price(USD):$31.14
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Clip AT Series™ Adhesive Mount
Available Stock
5,866
Estimated Ship Time:6-13 working days
10+$0.8625
25+$0.759
2,000+$0.6232
5,000+$0.4698
- +
Ext. Price(USD):$14.66
MOQ:17
Mult:1
SPQ:1
6pin Strain Relief AMP-DUAC Series 20.26mm H
Available Stock
708
Estimated Ship Time:6-13 working days
1+$8.3375
10+$7.304
400+$5.292
1,200+$4.9896
- +
Ext. Price(USD):$16.67
MOQ:2
Mult:1
SPQ:1
Hirose Heavy Duty Connector Housing, PQ50 Series, Right Angle, Plug Cover Box
Available Stock
78
Estimated Ship Time:6-13 working days
1+$17.3995
10+$13.8888
200+$10.9188
500+$10.53
- +
Ext. Price(USD):$17.39
MOQ:1
Mult:1
SPQ:1
10-Pin Cap (Cover), Front AMPMODU MT Series, 12.7mm L
Available Stock
240
Estimated Ship Time:6-13 working days
1+$2.4725
10+$2.093
2,500+$1.1556
5,000+$1.0908
- +
Ext. Price(USD):$14.83
MOQ:6
Mult:1
SPQ:1
Molex
ECAD Model:
Clip Mini Mi II 54596 Series 12-Pin Clip Mount
Available Stock
2,469
Estimated Ship Time:7-9 working days
10+
676+$0.0858
- +
Ext. Price(USD):$58.00
MOQ:676
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
1,825
Estimated Ship Time:7-9 working days
17+
300+$0.396
750+$0.341
1,500+$0.33
- +
Ext. Price(USD):$118.80
MOQ:300
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) AMPMODU Mod I Series 9.14mm L
Available Stock
1,880
Estimated Ship Time:7-9 working days
14+
150+$0.847
350+$0.825
650+$0.814
1,300+$0.803
- +
Ext. Price(USD):$127.05
MOQ:150
Mult:1
SPQ:1
Harwin
ECAD Model:
Locking Lever, Datamate-Accessory Series Locking Latch, For Datamate L-Tek Plug
Available Stock
1,290
Estimated Ship Time:5-10 working days
5+$1.0273
25+$0.9993
50+$0.9789
- +
Ext. Price(USD):$10.27
MOQ:10
Mult:5
25 / PageGoto