Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Polarizing Device (Key, Plug, Post), AMPMODU Mod II & IV Series
Available Stock
96
Estimated Ship Time:9-14 working days
1+$3.2724
10+$2.7756
1,000+$2.0052
2,500+$1.8797
- +
Ext. Price(USD):$26.17
MOQ:8
Mult:1
SPQ:1
3-Pin Lock Plate, Board Mount
Available Stock
795
Estimated Ship Time:7-9 working days
21+
150+$1.023
300+$0.99
- +
Ext. Price(USD):$153.45
MOQ:150
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Terminal Position Assurance (TPA)
Available Stock
13,037
Estimated Ship Time:9-14 working days
100+$0.1749
250+$0.1639
500+$0.1561
1,000+$0.1486
2,500+$0.1393
- +
Ext. Price(USD):$26.06
MOQ:149
Mult:1
SPQ:1
Amphenol
ECAD Model:
8-Pin Boot AT Series™
Available Stock
88
Estimated Ship Time:6-13 working days
10+$1.3685
25+$1.144
2,500+$0.8284
5,000+$0.8057
- +
Ext. Price(USD):$15.05
MOQ:11
Mult:1
SPQ:1
2-Pin Cap (Cover), Dust, Quadrax Series
Available Stock
50
Estimated Ship Time:7-9 working days
16+
16+$7.205
600+$7.205
- +
Ext. Price(USD):$115.28
MOQ:16
Mult:1
SPQ:1
Pancon
ECAD Model:
Tools and Accessories, Hand Tool for MC Pin Products
Available Stock
68
Estimated Ship Time:5-12 working days
1+$67.5808
5+$59.235
100+$49.9369
250+$49.2735
- +
Ext. Price(USD):$67.58
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93444 Housings
Available Stock
4,526
Estimated Ship Time:7-9 working days
19+
807+$0.0726
- +
Ext. Price(USD):$58.58
MOQ:807
Mult:1
SPQ:1
1-Pin Cap (Cover), 9177-600 Series Contacts
Available Stock
1,550
Estimated Ship Time:6-13 working days
25+$0.4608
100+$0.3899
5,600+$0.2565
10,400+$0.2463
- +
Ext. Price(USD):$26.72
MOQ:58
Mult:1
SPQ:1
3M
ECAD Model:
16-Pin Strain Relief, 3000 Series
Available Stock
950
Estimated Ship Time:9-14 working days
10+$2.4322
25+$2.2797
1,000+$1.7569
3,000+$1.626
- +
Ext. Price(USD):$26.75
MOQ:11
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Cap (Cover), ePower Series
Available Stock
35
Estimated Ship Time:9-14 working days
1+$71.5284
10+$60.7986
25+$56.9938
50+$54.276
100+$51.6887
- +
Ext. Price(USD):$71.52
MOQ:1
Mult:1
SPQ:1
HARTING
ECAD Model:
1P Single Row Header, Har-Modular Series, Right Angle
Available Stock
17
Estimated Ship Time:5-10 working days
1+$1.9119
10+$1.8609
100+$1.8355
- +
Ext. Price(USD):$7.64
MOQ:4
Mult:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
19,373
Estimated Ship Time:6-13 working days
25+$0.2381
100+$0.2266
5,000+$0.1609
10,000+$0.1577
- +
Ext. Price(USD):$14.04
MOQ:59
Mult:1
SPQ:1
26-Pin Cap (Cover), Front, AMPMODU MT Series
Available Stock
248
Estimated Ship Time:7-9 working days
11+
100+$1.155
- +
Ext. Price(USD):$115.50
MOQ:100
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Retention Key Mini-Fit Jr Series Wire Mount 3.3mm H
Available Stock
20,331
Estimated Ship Time:6-13 working days
100+$0.0978
250+$0.0851
5,000+$0.0691
10,000+$0.068
- +
Ext. Price(USD):$14.08
MOQ:144
Mult:1
SPQ:1
C42334A 386C 66 Bklev 413 Bueg
Available Stock
446
Estimated Ship Time:7-10 working days
23+
63+$1.771
215+$1.683
- +
Ext. Price(USD):$111.57
MOQ:63
Mult:1
SPQ:1
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
6,649
Estimated Ship Time:6-13 working days
1+$5.4165
- +
Ext. Price(USD):$16.24
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
14-Pin Strain Relief Milli-Grid 8mm H
Available Stock
16,570
Estimated Ship Time:6-13 working days
25+$0.2565
100+$0.2438
250+$0.2013
1,000+$0.1793
2,500+$0.1728
- +
Ext. Price(USD):$14.10
MOQ:55
Mult:1
SPQ:1
2-Pin Receptacle, ATM Series, Cap (Cover), Dust Cover
Available Stock
770
Estimated Ship Time:6-13 working days
10+$0.7395
25+$0.6601
1,000+$0.5011
2,500+$0.4698
- +
Ext. Price(USD):$14.05
MOQ:19
Mult:1
SPQ:1
Capacitor Cover, 3-Pin, 9176 Series
Available Stock
3,008
Estimated Ship Time:9-14 working days
1+$1.2093
10+$1.0262
1,000+$0.6204
3,000+$0.5741
- +
Ext. Price(USD):$150.35
MOQ:206
Mult:1
SPQ:1
Molex
ECAD Model:
11pin Cable Holder Ribbon Cables Wire Mount 3.8mm H
Available Stock
10,000
Estimated Ship Time:7-9 working days
19+
417+$0.1397
5,000+$0.1342
10,000+$0.1287
- +
Ext. Price(USD):$58.25
MOQ:417
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
5+$268.4858
10+$263.115
50+$257.853
100+$252.6959
500+$247.642
- +
Ext. Price(USD):$1,342.42
MOQ:5
Mult:5
SPQ:1
Dynamic Multi-Enclosure Outside Case, Wire-to-Wire, Metal/Plastic, IP67/IP65 with Glands
Available Stock
185
Estimated Ship Time:9-14 working days
1+$26.1792
10+$22.2491
250+$17.7308
500+$16.8856
- +
Ext. Price(USD):$26.17
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin Backshell MultiCat Housings
Available Stock
7,086
Estimated Ship Time:6-13 working days
1+$3.197
10+$2.8405
250+$2.0736
2,000+$1.7928
- +
Ext. Price(USD):$15.98
MOQ:5
Mult:1
SPQ:1
3M
ECAD Model:
Ejector Latch, Short 4600 Series 4.5mm L × 5.08mm W
Available Stock
3,461
Estimated Ship Time:6-13 working days
10+$0.7372
25+$0.6578
5,000+$0.4568
10,000+$0.4277
- +
Ext. Price(USD):$14.00
MOQ:19
Mult:1
SPQ:1
ASSMANN WSW IDC Tool, Pull and Insert Tool
Available Stock
5,892
Estimated Ship Time:5-10 working days
50+$0.0727
- +
Ext. Price(USD):$6.54
MOQ:90
Mult:10
25 / PageGoto