Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
3M
ECAD Model:
24-Pin Strain Relief D89 Series
Available Stock
1,136
Estimated Ship Time:9-14 working days
50+$0.4517
100+$0.4301
1,000+$0.3655
2,500+$0.3426
- +
Ext. Price(USD):$26.19
MOQ:58
Mult:1
SPQ:1
Molex
ECAD Model:
2pin Wedgelock ML-XT 93444 Housings
Available Stock
6,343
Estimated Ship Time:7-9 working days
18+
1,316+$0.044
- +
Ext. Price(USD):$57.90
MOQ:1,316
Mult:1
SPQ:1
26-Pin Holder CT Series Bracket Mount
Available Stock
15,317
Estimated Ship Time:7-9 working days
19+
300+$0.429
650+$0.418
2,600+$0.407
6,000+$0.374
10,000+$0.3267
- +
Ext. Price(USD):$128.70
MOQ:300
Mult:1
SPQ:1
2-Pin Cap (Cover), End MTA-156 Series
Available Stock
2,749
Estimated Ship Time:6-13 working days
10+$0.9649
25+$0.6923
2,000+$0.5692
4,000+$0.567
- +
Ext. Price(USD):$14.47
MOQ:15
Mult:1
SPQ:1
PCU 91P Retainer HSG-MCON 1.2mm
Available Stock
1,200
Estimated Ship Time:5-12 working days
50+$1.4
700+$0.6578
10,500+$0.5382
15,400+$0.5371
- +
Ext. Price(USD):$70.00
MOQ:50
Mult:1
SPQ:700
Molex
ECAD Model:
22-Pin Shroud C-Grid SL Series Clip Mount Free Hanging 19.05mm H
Available Stock
27,300
Estimated Ship Time:7-9 working days
23+
85+$1.375
250+$1.353
10,000+$1.089
20,000+$1.023
- +
Ext. Price(USD):$116.87
MOQ:85
Mult:1
SPQ:1
30-Pin TPA Economy Power Housings, Panel Mount
Available Stock
36,032
Estimated Ship Time:7-9 working days
23+
4,000+$0.0495
7,000+$0.0484
14,000+$0.0473
24,000+$0.0462
28,000+$0.0451
- +
Ext. Price(USD):$198.00
MOQ:4,000
Mult:1
SPQ:1
Available Stock
323
Estimated Ship Time:5-12 working days
2+$10.8215
25+$3.9536
500+$2.5359
1,000+$2.4075
- +
Ext. Price(USD):$32.46
MOQ:3
Mult:1
SPQ:100
Molex
ECAD Model:
Mounting Clip 2481 Series
Available Stock
51
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
4pin Gasket MX150L Series Flange Mount 48.26mm(L) × 30.48mm(W)
Available Stock
584
Estimated Ship Time:9-14 working days
25+$0.8519
50+$0.8113
1,248+$0.6464
2,808+$0.6104
- +
Ext. Price(USD):$26.40
MOQ:31
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts
Available Stock
90
Estimated Ship Time:5-12 working days
1+$84.7504
25+$63.2905
150+$56.924
200+$55.7898
- +
Ext. Price(USD):$84.75
MOQ:1
Mult:1
SPQ:1
Mounting Base DMC-M Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
2+$873.99
10+$856.508
50+$839.3777
100+$822.5901
500+$806.1384
- +
Ext. Price(USD):$1,747.98
MOQ:2
Mult:2
SPQ:1
40-Pin Cap (Cover) 67.4mm(L) × 38.8mm(H)
Available Stock
2,008
Estimated Ship Time:7-9 working days
18+
300+$0.374
750+$0.363
1,200+$0.341
- +
Ext. Price(USD):$112.20
MOQ:300
Mult:1
SPQ:1
4-Pin Shroud, AMPMODU MTE Series, Panel Mount
Available Stock
1,836
Estimated Ship Time:6-13 working days
1+$3.105
10+$2.7255
2,500+$1.62
5,000+$1.5768
- +
Ext. Price(USD):$15.52
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
36-Pin Shroud C-Grid SL Series, Bracket Mount, 49.93mm L × 19.05mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Protective Cover, MTC Series
Available Stock
47
Estimated Ship Time:7-9 working days
19+
1+$470.129
2+$461.505
250+$345.532
500+$318.945
- +
Ext. Price(USD):$470.12
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
26-Pin Shroud, C-Grid SL Series, Bracket Mount, Free Hanging, 19.05mm H
Available Stock
5,910
Estimated Ship Time:7-9 working days
22+
80+$1.474
200+$1.43
1,200+$1.353
4,000+$1.188
- +
Ext. Price(USD):$117.92
MOQ:80
Mult:1
SPQ:1
Header, 24-Pin, 0600 Series, Cap (Cover), SMD
Available Stock
112
Estimated Ship Time:9-14 working days
1+$6.0264
10+$5.1246
1,000+$3.7024
2,500+$3.4709
- +
Ext. Price(USD):$30.13
MOQ:5
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
1,492
Estimated Ship Time:6-13 working days
100+$0.1001
250+$0.092
2,500+$0.0626
5,000+$0.0605
10,000+$0.0583
- +
Ext. Price(USD):$14.01
MOQ:140
Mult:1
SPQ:1
4-Pin Frame Dynamic Series, 97.1mm L x 40.4mm W
Available Stock
147
Estimated Ship Time:6-13 working days
1+$12.167
10+$10.472
500+$7.8624
1,000+$7.1064
- +
Ext. Price(USD):$24.33
MOQ:2
Mult:1
SPQ:1
1-Pin Wire Seal CI 2 Series Adhesive Mount, Wire Mount
Available Stock
40,095
Estimated Ship Time:7-9 working days
18+
1,100+$0.1067
3,000+$0.1045
6,000+$0.1034
11,000+$0.1012
- +
Ext. Price(USD):$117.37
MOQ:1,100
Mult:1
SPQ:1
ARATAS
ECAD Model:
STRAIN RELIEF 26POS WITH LOCK
Available Stock
88
Estimated Ship Time:9-14 working days
10+$1.7809
25+$1.6688
1,000+$1.286
2,600+$1.2022
- +
Ext. Price(USD):$26.71
MOQ:15
Mult:1
SPQ:1
12-Pin Shroud AMPMODU MTE Series Wire Mount 7.87mm H
Available Stock
288
Estimated Ship Time:7-9 working days
16+
49+$2.266
168+$2.156
- +
Ext. Price(USD):$111.03
MOQ:49
Mult:1
SPQ:1
6-Pin Cap (Cover), Strain Relief, MTA-156 Series, SMD, 11.94mm H
Available Stock
2,203
Estimated Ship Time:6-13 working days
10+$0.7993
25+$0.7222
5,000+$0.3802
10,000+$0.338
- +
Ext. Price(USD):$14.38
MOQ:18
Mult:1
SPQ:1
Harwin
ECAD Model:
Backshell Datamate L-Tek 16-Pin Board Mount 22.3mm (L) × 23mm (W)
Available Stock
13
Estimated Ship Time:9-14 working days
1+$5.3244
10+$4.523
1,000+$3.2682
2,500+$3.0638
- +
Ext. Price(USD):$26.62
MOQ:5
Mult:1
SPQ:1
25 / PageGoto