Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Seal
Available Stock
4,029
Estimated Ship Time:6-13 working days
10+$1.1282
25+$1.0822
2,500+$0.5832
5,000+$0.5789
- +
Ext. Price(USD):$14.66
MOQ:13
Mult:1
SPQ:1
Locking Clip, Wire Mount, 2.9mm L × 3.6mm H
Available Stock
350
Estimated Ship Time:9-14 working days
10+$1.4299
25+$1.3405
1,000+$1.0329
2,500+$0.9682
- +
Ext. Price(USD):$27.16
MOQ:19
Mult:1
SPQ:1
3-Pin TE Single-Piece & Select Two-Piece Male & Female Connectors
Available Stock
8,383
Estimated Ship Time:6-13 working days
10+$0.7981
25+$0.6992
2,500+$0.4914
5,000+$0.4882
- +
Ext. Price(USD):$14.36
MOQ:18
Mult:1
SPQ:1
Hirose ST Series Cable Clamp, Stainless Steel, 4mm Bundle Dia
Available Stock
100
Estimated Ship Time:5-10 working days
10+$0.6029
30+$0.5902
50+$0.5774
- +
Ext. Price(USD):$12.05
MOQ:20
Mult:10
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
2,067
Estimated Ship Time:6-13 working days
10+$0.8959
25+$0.8131
2,500+$0.5789
5,000+$0.5335
- +
Ext. Price(USD):$14.33
MOQ:16
Mult:1
SPQ:1
Cap (Cover), Dust MTA-156 Series 14-Pin 11.18mm H
Available Stock
3,000
Estimated Ship Time:5-12 working days
500+$0.2137
2,500+$0.1653
50,000+$0.1141
100,000+$0.1138
- +
Ext. Price(USD):$106.85
MOQ:500
Mult:500
SPQ:500
TE Connectivity AMP-LATCH Series Blind Mate Connector, Male Terminal
Available Stock
14,331
Estimated Ship Time:7-9 working days
23+
2,000+$0.0814
5,000+$0.0748
10,000+$0.0726
- +
Ext. Price(USD):$162.80
MOQ:2,000
Mult:1,000
SPQ:1,000
2-Pin Boot, DTP Series Plug
Available Stock
3,313
Estimated Ship Time:6-13 working days
10+$1.2995
25+$1.133
2,500+$0.9158
5,000+$0.9115
- +
Ext. Price(USD):$14.29
MOQ:11
Mult:1
SPQ:1
6-Pin Cap (Cover) MQS/LWL Series TH
Available Stock
5,451
Estimated Ship Time:7-9 working days
19+
150+$0.781
400+$0.77
750+$0.748
1,000+$0.726
- +
Ext. Price(USD):$117.15
MOQ:150
Mult:1
SPQ:1
Gasket, 8-Pin, AT Series™, Panel Mount
Available Stock
97
Estimated Ship Time:6-13 working days
1+$2.8635
10+$2.438
2,500+$1.3932
5,000+$1.3716
- +
Ext. Price(USD):$14.31
MOQ:5
Mult:1
SPQ:1
28-Pin Insert Electronic Control Module Sealed Connectors (ECMSC) Series, Adhesive Mount
Available Stock
975
Estimated Ship Time:5-12 working days
25+$2.5088
50+$1.9936
600+$1.4873
800+$1.4231
- +
Ext. Price(USD):$62.72
MOQ:25
Mult:1
SPQ:1
10-Pin Retainer Clip DF1E Series Fixed Mount
Available Stock
254
Estimated Ship Time:6-13 working days
25+$0.4842
100+$0.462
5,000+$0.3229
10,000+$0.3154
- +
Ext. Price(USD):$14.04
MOQ:29
Mult:1
SPQ:1
3M
ECAD Model:
Ejector Latch, Short 3000 Series
Available Stock
3,080
Estimated Ship Time:6-13 working days
10+$0.6647
25+$0.5934
1,200+$0.445
3,000+$0.4169
- +
Ext. Price(USD):$14.62
MOQ:22
Mult:1
SPQ:1
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
4,749
Estimated Ship Time:6-13 working days
10+$0.9603
25+$0.8568
2,500+$0.5486
5,000+$0.5454
- +
Ext. Price(USD):$14.40
MOQ:15
Mult:1
SPQ:1
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
24,090
Estimated Ship Time:7-9 working days
21+
650+$0.1705
1,700+$0.1672
3,300+$0.1639
6,500+$0.1606
8,000+$0.1573
- +
Ext. Price(USD):$110.82
MOQ:650
Mult:1
SPQ:1
16-Pin Shroud AMPMODU MTE Series Panel Mount
Available Stock
129
Estimated Ship Time:5-12 working days
10+$2.7485
50+$2.398
2,500+$2.1186
5,000+$1.8939
- +
Ext. Price(USD):$30.23
MOQ:11
Mult:1
SPQ:1
Souriau Connector Blind Mate Plug, Polarized Key, SMS Series
Available Stock
2,460
Estimated Ship Time:5-10 working days
20+$0.4468
100+$0.4334
260+$0.42
500+$0.413
1,000+$0.3996
- +
Ext. Price(USD):$8.93
MOQ:20
Mult:20
3M
ECAD Model:
24-Pin Strain Relief 3000 Series 35.1mm L × 6.1mm H
Available Stock
348
Estimated Ship Time:9-14 working days
25+$0.7616
50+$0.7253
1,000+$0.587
2,500+$0.5502
- +
Ext. Price(USD):$26.65
MOQ:35
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
2-Pin Hood and Strain Relief Trident Rectangular Plugs
Available Stock
47
Estimated Ship Time:5-12 working days
10+$3.404
50+$2.915
2,500+$1.5622
5,000+$1.3696
- +
Ext. Price(USD):$34.04
MOQ:10
Mult:1
SPQ:100
Backshell
Available Stock
21
Estimated Ship Time:7-9 working days
19+
1+$433.048
2+$424.886
3+$416.713
- +
Ext. Price(USD):$433.04
MOQ:1
Mult:1
SPQ:1
70-Pin Boot DRC Series Connector
Available Stock
842
Estimated Ship Time:6-13 working days
1+$5.6235
10+$4.257
500+$3.2076
1,000+$3.0672
- +
Ext. Price(USD):$16.87
MOQ:3
Mult:1
SPQ:1
3M
ECAD Model:
44-Pin Strain Relief 1522 Series
Available Stock
299
Estimated Ship Time:9-14 working days
1+$5.0868
10+$4.3265
1,000+$3.1254
2,500+$2.93
- +
Ext. Price(USD):$30.52
MOQ:6
Mult:1
SPQ:1
Screws, MTC Series, Screw Mount
Available Stock
147
Estimated Ship Time:5-12 working days
1+$66.6176
25+$63.4831
245+$23.0264
326+$22.5663
- +
Ext. Price(USD):$66.61
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin TPA Spot-On 2.0 Housings
Available Stock
15,671
Estimated Ship Time:9-14 working days
50+$0.1413
200+$0.128
1,000+$0.1142
2,600+$0.1068
- +
Ext. Price(USD):$26.11
MOQ:204
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Wedge for Pins, ATP Series™
Available Stock
161
Estimated Ship Time:6-13 working days
25+$0.4796
100+$0.4257
5,225+$0.2851
10,175+$0.2776
- +
Ext. Price(USD):$14.38
MOQ:30
Mult:1
SPQ:1
25 / PageGoto