Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
22-Pin Cap (Cover), Strain Relief, MTA-100 Series
Available Stock
575
Estimated Ship Time:7-9 working days
02+
250+$0.528
550+$0.517
- +
Ext. Price(USD):$132.00
MOQ:250
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
25+$83.2974
100+$81.6314
200+$79.9988
500+$78.3988
1,000+$76.8308
- +
Ext. Price(USD):$2,082.43
MOQ:25
Mult:25
SPQ:1
Adam Tech
ECAD Model:
26-Pin Strain Relief, FCS Series
Available Stock
998
Estimated Ship Time:9-14 working days
100+$0.1159
250+$0.1086
500+$0.1034
1,000+$0.0985
3,000+$0.0911
- +
Ext. Price(USD):$26.07
MOQ:225
Mult:1
SPQ:1
Molex
ECAD Model:
TPA FOR L1 NK 250 - 1X5 Ckt
Available Stock
19,273
Estimated Ship Time:7-9 working days
19+
1,409+$0.0825
3,600+$0.0814
7,100+$0.0792
12,000+$0.077
- +
Ext. Price(USD):$116.24
MOQ:1,409
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Backshell, MX150 Series
Available Stock
6,701
Estimated Ship Time:9-14 working days
10+$1.2982
25+$1.2169
1,000+$0.938
2,500+$0.8803
- +
Ext. Price(USD):$27.26
MOQ:21
Mult:1
SPQ:1
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Available Stock
7,430
Estimated Ship Time:6-13 working days
1+$3.174
25+$2.915
900+$2.16
2,700+$1.8792
- +
Ext. Price(USD):$15.87
MOQ:5
Mult:1
SPQ:1
Ferrule
Available Stock
28
Estimated Ship Time:9-14 working days
2+$845.7048
10+$828.7898
50+$812.214
100+$795.9696
500+$780.0503
- +
Ext. Price(USD):$1,691.40
MOQ:2
Mult:2
SPQ:1
8-Pin TPA Val-U-Lok Housings
Available Stock
5,068
Estimated Ship Time:6-13 working days
25+$0.4002
100+$0.3388
5,000+$0.2074
7,000+$0.2063
- +
Ext. Price(USD):$14.00
MOQ:35
Mult:1
SPQ:1
Molex
ECAD Model:
Connector and Interconnects Accessories
Available Stock
693
Estimated Ship Time:7-9 working days
15+
29+$2.068
300+$1.98
- +
Ext. Price(USD):$59.97
MOQ:29
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
600
Estimated Ship Time:5-12 working days
5+$9.4185
25+$7.282
1,000+$5.3179
2,500+$5.2323
- +
Ext. Price(USD):$47.09
MOQ:5
Mult:1
SPQ:1
6-Pin Locking Plate, Power Triple Lock Series, Board Mount
Available Stock
6,025
Estimated Ship Time:5-12 working days
100+$0.2276
1,400+$0.1917
50,400+$0.1669
100,800+$0.163
- +
Ext. Price(USD):$30.04
MOQ:132
Mult:1
SPQ:1,400
12-Pin Gasket, DT Series, 55.37mm (W) × 35.56mm (H)
Available Stock
1,214
Estimated Ship Time:5-10 working days
1+$0.8667
10+$0.803
25+$0.7775
- +
Ext. Price(USD):$6.93
MOQ:8
Mult:1
TPA Terminal Positioning Clip, Dual Lock Signal Device with Plug and Cap to Ensure Proper Seating
Available Stock
25,736
Estimated Ship Time:7-9 working days
21+
3,000+$0.0462
10,000+$0.0429
25,000+$0.0319
- +
Ext. Price(USD):$138.60
MOQ:3,000
Mult:1,000
SPQ:1,000
ITT Cannon
ECAD Model:
Connector Wedgelock For IT Series - Rectangular Connector Accessories
Available Stock
232,751
Estimated Ship Time:7-9 working days
22+
850+$0.1353
4,100+$0.1309
8,100+$0.1243
40,400+$0.1199
121,000+$0.1144
- +
Ext. Price(USD):$115.00
MOQ:850
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Shroud, C-Grid SL Series, Wire Mount, 21.43mm L × 8.12mm H
Available Stock
2,500
Estimated Ship Time:9-14 working days
10+$1.3889
25+$1.3016
1,000+$1.003
2,500+$0.9403
- +
Ext. Price(USD):$26.38
MOQ:19
Mult:1
SPQ:1
Amphenol
ECAD Model:
Socket Wedge, 4-Pin, ATP Series
Available Stock
701
Estimated Ship Time:6-13 working days
25+$0.4186
100+$0.3817
5,500+$0.27
10,450+$0.2624
- +
Ext. Price(USD):$14.23
MOQ:34
Mult:1
SPQ:1
Molex
ECAD Model:
5-Pin Terminal Position Assurance (TPA), 49623 Series
Available Stock
30,000
Estimated Ship Time:7-9 working days
18+
2,000+$0.0363
9,000+$0.0352
35,000+$0.0341
- +
Ext. Price(USD):$72.60
MOQ:2,000
Mult:1
SPQ:1
DT Dust Cap, Protects Unmated Connector Interfaces, Plastic/Thermoplastic for Deutch DT Connectors
Available Stock
6,635
Estimated Ship Time:6-13 working days
10+$0.7222
25+$0.6578
5,000+$0.4666
10,000+$0.4622
- +
Ext. Price(USD):$14.44
MOQ:20
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
2,500
Estimated Ship Time:7-9 working days
21+
250+$0.539
550+$0.528
1,100+$0.517
2,100+$0.506
- +
Ext. Price(USD):$134.75
MOQ:250
Mult:1
SPQ:1
7-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
462
Estimated Ship Time:9-14 working days
100+$0.1612
250+$0.1511
500+$0.1439
1,000+$0.137
3,000+$0.1267
- +
Ext. Price(USD):$26.11
MOQ:162
Mult:1
SPQ:1
NOVO AMP Latch, Ribbon Cable Connector Component, Glass Filled Nylon, 10-64 Pin Options
Available Stock
2,499
Estimated Ship Time:9-14 working days
50+$0.3683
100+$0.3506
1,000+$0.2979
2,500+$0.2793
- +
Ext. Price(USD):$26.14
MOQ:71
Mult:1
SPQ:1
Amphenol
ECAD Model:
Latch BergCon® Series
Available Stock
4,443
Estimated Ship Time:6-13 working days
10+$0.9212
25+$0.8223
1,000+$0.5951
2,000+$0.5778
- +
Ext. Price(USD):$14.73
MOQ:16
Mult:1
SPQ:1
3M
ECAD Model:
Ejector Latch Long 4600 Series 22.23mm × 5.08mm × 5.08mm
Available Stock
536
Estimated Ship Time:6-12 working days
1+$0.3884
- +
Ext. Price(USD):$25.24
MOQ:65
Mult:1
2-Pin Retainer iBridge Ultra Female Connector
Available Stock
20,030
Estimated Ship Time:5-12 working days
100+$0.3982
250+$0.3868
3,750+$0.2573
5,000+$0.2522
- +
Ext. Price(USD):$39.82
MOQ:100
Mult:1
SPQ:1,000
40-Pin Latch DF81 Series Connector
Available Stock
630
Estimated Ship Time:6-13 working days
1+$4.1515
10+$3.608
1,000+$2.322
2,500+$2.214
- +
Ext. Price(USD):$16.60
MOQ:4
Mult:1
SPQ:1
25 / PageGoto