Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
379
Estimated Ship Time:7-9 working days
15+
193+$0.572
2,000+$0.572
10,000+$0.462
25,000+$0.396
- +
Ext. Price(USD):$110.39
MOQ:193
Mult:1
SPQ:1
Amphenol
ECAD Model:
2pin Cap (Cover) ePower Series
Available Stock
8
Estimated Ship Time:9-14 working days
1+$107.6112
10+$91.4695
25+$85.7477
50+$81.6597
100+$77.7682
- +
Ext. Price(USD):$107.61
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
TPA Retainer, 4POS, Grey, Polyester
Available Stock
181,854
Estimated Ship Time:7-9 working days
21+
3,226+$0.0363
9,000+$0.0352
17,000+$0.0341
60,000+$0.033
120,000+$0.0297
- +
Ext. Price(USD):$117.10
MOQ:3,226
Mult:1
SPQ:1
Polarization Device (Key, Plug, Terminal) Box Series 6.35mm L
Available Stock
2
Estimated Ship Time:5-12 working days
1+$22.172
10+$19.987
300+$18.0937
500+$17.8155
- +
Ext. Price(USD):$44.34
MOQ:2
Mult:1
SPQ:100
4-Pin Shroud AMPMODU MTE Series, 14.78mm H
Available Stock
4,430
Estimated Ship Time:7-9 working days
10+
70+$1.595
200+$1.573
350+$1.54
700+$1.518
- +
Ext. Price(USD):$111.65
MOQ:70
Mult:1
SPQ:1
4-Pin Cap (Cover), Dust, SMD
Available Stock
1,485
Estimated Ship Time:6-13 working days
10+$1.2075
25+$1.0718
2,500+$0.7128
5,000+$0.6804
- +
Ext. Price(USD):$14.49
MOQ:12
Mult:1
SPQ:1
Universal I/O Pin Connector Stress Relief, Ribbon Cable Assembly, Glass-Filled Polyester, Lock Hook, 10-64 Pins
Available Stock
6,000
Estimated Ship Time:7-9 working days
24+
25+$4.466
65+$4.389
150+$4.312
250+$4.235
1,000+$3.85
- +
Ext. Price(USD):$111.65
MOQ:25
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), 812 Series
Available Stock
4,620
Estimated Ship Time:7-9 working days
15+
271+$0.407
1,316+$0.396
2,632+$0.385
- +
Ext. Price(USD):$110.29
MOQ:271
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin TPA Ultra-Fit Series Connector, Fixed Mount
Available Stock
27,910
Estimated Ship Time:7-9 working days
18+
944+$0.0616
10,000+$0.0583
21,000+$0.0561
- +
Ext. Price(USD):$58.15
MOQ:944
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Backshell MX120 Series
Available Stock
3,000
Estimated Ship Time:7-9 working days
23+
500+$0.385
750+$0.352
1,750+$0.3102
- +
Ext. Price(USD):$192.50
MOQ:500
Mult:250
SPQ:250
Amphenol
ECAD Model:
4-Pin Wedge for Pins, ATP Series™
Available Stock
626
Estimated Ship Time:6-13 working days
25+$0.4796
100+$0.4477
5,225+$0.2851
10,175+$0.2776
- +
Ext. Price(USD):$14.38
MOQ:30
Mult:1
SPQ:1
HARTING
ECAD Model:
Polarizing Device (Key, Plug, Post) SEK Series
Available Stock
80
Estimated Ship Time:9-14 working days
10+$1.1383
25+$1.067
1,000+$0.8222
2,500+$0.7707
- +
Ext. Price(USD):$26.18
MOQ:23
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories, Terminal Position Assurance, Straight, Nylon, Black, Gold Plated, Ultra-Fit™ Series, Bag
Available Stock
15,269
Estimated Ship Time:7-9 working days
21+
1,112+$0.0528
12,000+$0.0506
- +
Ext. Price(USD):$58.71
MOQ:1,112
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin Terminal Position Assurance (TPA) Ditto Series
Available Stock
15,400
Estimated Ship Time:7-9 working days
19+
400+$0.1573
450+$0.1463
2,600+$0.1221
5,400+$0.1155
9,900+$0.1023
- +
Ext. Price(USD):$62.92
MOQ:400
Mult:1
SPQ:1
PWR VERSA-LOCK TPA, 1X4
Available Stock
2,003
Estimated Ship Time:9-14 working days
100+$0.2245
250+$0.2105
500+$0.2004
1,000+$0.1908
2,500+$0.1789
- +
Ext. Price(USD):$26.04
MOQ:116
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), AMP-LATCH Series, 685.8μm × 890μm × 6.22mm
Available Stock
7,265
Estimated Ship Time:6-13 working days
1+$2.3345
10+$2.047
1,000+$1.3176
2,500+$1.2312
- +
Ext. Price(USD):$14.00
MOQ:6
Mult:1
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 2-Pos
Available Stock
478
Estimated Ship Time:7-10 working days
23+
350+$0.407
1,000+$0.2585
- +
Ext. Price(USD):$142.45
MOQ:350
Mult:1
SPQ:1
Hirose Holder, EnerBee DF33C Series
Available Stock
2,429
Estimated Ship Time:6-13 working days
25+$0.2634
100+$0.2404
5,000+$0.1436
10,000+$0.135
- +
Ext. Price(USD):$14.22
MOQ:54
Mult:1
SPQ:1
Molex
ECAD Model:
9pin Cable Holder Ribbon Cables Wire Mount 3.8mm H
Available Stock
89,500
Estimated Ship Time:7-9 working days
19+
725+$0.0803
8,000+$0.077
16,000+$0.0737
41,000+$0.0715
- +
Ext. Price(USD):$58.21
MOQ:725
Mult:1
SPQ:1
Mounting Base DMC-M Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
2+$769.905
10+$754.5042
50+$739.4144
100+$724.6261
500+$710.1336
- +
Ext. Price(USD):$1,539.81
MOQ:2
Mult:2
SPQ:1
10-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
44,368
Estimated Ship Time:7-9 working days
15+
1,500+$0.0737
3,800+$0.0726
24,000+$0.0682
25,000+$0.0638
- +
Ext. Price(USD):$110.55
MOQ:1,500
Mult:1
SPQ:1
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
916
Estimated Ship Time:6-13 working days
1+$2.507
10+$2.139
2,000+$1.3284
5,000+$1.296
- +
Ext. Price(USD):$15.04
MOQ:6
Mult:1
SPQ:1
Guide Pin Box Series Board Mount
Available Stock
216
Estimated Ship Time:7-9 working days
21+
3+$49.522
6+$48.664
12+$47.817
23+$46.959
- +
Ext. Price(USD):$148.56
MOQ:3
Mult:1
SPQ:1
2-Pin Lock Plate, Board Mount
Available Stock
7,406
Estimated Ship Time:5-12 working days
1,200+$0.0598
3,600+$0.0567
150,000+$0.027
250,800+$0.0265
- +
Ext. Price(USD):$71.76
MOQ:1,200
Mult:1,200
SPQ:1,200
Mencom
ECAD Model:
Conn Rectangular SKT 5 POS Crimp ST Cable Mount
Available Stock
56
Estimated Ship Time:5-12 working days
5+$10.5455
25+$8.195
1,000+$6.8052
2,500+$6.5484
- +
Ext. Price(USD):$52.72
MOQ:5
Mult:1
SPQ:1
25 / PageGoto