Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
3-Pin Press-Fit
Available Stock
54
Estimated Ship Time:9-14 working days
1+$9.4716
12+$7.947
504+$6.1047
1,008+$5.8136
- +
Ext. Price(USD):$28.41
MOQ:3
Mult:1
SPQ:1
1-Pin Cap (Cover) Micro Quadlok Series
Available Stock
248
Estimated Ship Time:6-13 working days
1+$2.5875
10+$2.1965
2,500+$1.3284
5,000+$1.2852
- +
Ext. Price(USD):$15.52
MOQ:6
Mult:1
SPQ:1
Amphenol
ECAD Model:
Polarizing Device (Key, Plug, Post) BergCon® Series
Available Stock
13,319
Estimated Ship Time:9-14 working days
50+$0.2998
100+$0.2853
1,000+$0.2425
3,000+$0.2244
- +
Ext. Price(USD):$26.08
MOQ:87
Mult:1
SPQ:1
Molex
ECAD Model:
5-Pin Cable Holder, Ribbon Cables, Wire Mount, 12.5mm L × 4.5mm H
Available Stock
255,000
Estimated Ship Time:7-9 working days
19+
1,352+$0.0429
14,000+$0.0418
30,000+$0.0396
76,000+$0.0385
235,000+$0.0374
- +
Ext. Price(USD):$58.00
MOQ:1,352
Mult:1
SPQ:1
Connector 4-Pin Strain Relief High Current Commercial
Available Stock
2,877
Estimated Ship Time:7-9 working days
23+
40+$2.838
100+$2.794
500+$2.068
1,000+$1.683
- +
Ext. Price(USD):$113.52
MOQ:40
Mult:1
SPQ:1
Amphenol Industrial PCB Housing, AIPXE Series, Thermoplastic, 82.55 × 101.6 × 19mm, 24-Pin
Available Stock
1,540
Estimated Ship Time:9-14 working days
1+$34.8732
10+$29.6363
140+$24.6026
280+$23.4299
- +
Ext. Price(USD):$34.87
MOQ:1
Mult:1
SPQ:1
24-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
493
Estimated Ship Time:6-13 working days
1+$5.0485
10+$4.444
1,000+$3.4236
2,500+$3.3804
- +
Ext. Price(USD):$15.14
MOQ:3
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
1,348
Estimated Ship Time:5-12 working days
250+$0.1431
1,000+$0.1244
50,000+$0.0782
100,000+$0.078
- +
Ext. Price(USD):$35.77
MOQ:250
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Terminal Locking Strip, SL Series
Available Stock
4,076
Estimated Ship Time:7-9 working days
22+
901+$0.1298
2,300+$0.1276
24,000+$0.1111
80,000+$0.0968
- +
Ext. Price(USD):$116.94
MOQ:901
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Backshell, MX150 Series
Available Stock
74
Estimated Ship Time:7-10 working days
25+
65+$1.991
75+$1.903
4,000+$1.408
10,000+$1.397
- +
Ext. Price(USD):$129.41
MOQ:65
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
28
Estimated Ship Time:9-14 working days
5+$231.7853
10+$227.1499
50+$222.6066
100+$218.1544
500+$213.7913
- +
Ext. Price(USD):$1,158.92
MOQ:5
Mult:5
SPQ:1
RS PRO
ECAD Model:
RS PRO Elastic Cable Clamp, Steel, 38.1mm Dia, Black, 4BA Hole Dia
Available Stock
790
Estimated Ship Time:5-10 working days
10+$3.6875
50+$3.6237
100+$3.5575
400+$3.4759
2,000+$2.8602
- +
Ext. Price(USD):$36.87
MOQ:10
Mult:10
3-Pin Insert Connector Micro Quadlok Series
Available Stock
9,495
Estimated Ship Time:6-13 working days
10+$1.2305
25+$1.1213
96+$0.9108
- +
Ext. Price(USD):$14.76
MOQ:12
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
8-Pin Wedgelock IT Series Connector
Available Stock
4,993
Estimated Ship Time:9-14 working days
50+$0.2737
100+$0.2606
1,000+$0.2214
2,500+$0.2076
- +
Ext. Price(USD):$26.00
MOQ:95
Mult:1
SPQ:1
11-Pin Cap (Cover), Strain Relief MTA-156 Series 43.59mm L
Available Stock
2,000
Estimated Ship Time:7-9 working days
24+
250+$0.517
750+$0.506
1,300+$0.495
2,000+$0.473
- +
Ext. Price(USD):$129.25
MOQ:250
Mult:1
SPQ:1
Molex
ECAD Model:
44-Pin Shroud C-Grid SL Series, Clip Mount, 19.05mm H
Available Stock
389
Estimated Ship Time:7-9 working days
10+
45+$2.651
150+$2.596
250+$2.552
- +
Ext. Price(USD):$119.29
MOQ:45
Mult:1
SPQ:1
Available Stock
227
Estimated Ship Time:6-13 working days
1+$15.4445
10+$12.8628
25+$12.366
50+$11.8692
100+$10.854
- +
Ext. Price(USD):$15.44
MOQ:1
Mult:1
SPQ:1
Latch
Available Stock
5,483
Estimated Ship Time:6-13 working days
10+$0.2438
1,000+$0.1944
3,000+$0.1825
5,000+$0.1739
- +
Ext. Price(USD):$14.14
MOQ:58
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
Connector, 6-Pin, Wedgelock IT Series
Available Stock
4,072
Estimated Ship Time:9-14 working days
100+$0.1776
250+$0.1665
500+$0.1585
1,000+$0.1509
2,500+$0.1414
- +
Ext. Price(USD):$26.10
MOQ:147
Mult:1
SPQ:1
Harwin
ECAD Model:
14-Pin Backshell, Datamate L-Tek
Available Stock
428
Estimated Ship Time:9-14 working days
1+$5.2596
10+$4.4658
1,000+$3.2263
2,500+$3.0245
- +
Ext. Price(USD):$26.29
MOQ:5
Mult:1
SPQ:1
Lock
Available Stock
34,422
Estimated Ship Time:6-13 working days
25+$0.4773
100+$0.4356
4,000+$0.3229
12,000+$0.3175
- +
Ext. Price(USD):$14.31
MOQ:30
Mult:1
SPQ:1
Retainer Micro Quadlok Series Panel Mount
Available Stock
5,821
Estimated Ship Time:6-13 working days
25+$0.207
100+$0.1967
3,000+$0.135
10,000+$0.1188
- +
Ext. Price(USD):$14.07
MOQ:68
Mult:1
SPQ:1
Molex
ECAD Model:
24-Pin Clip Mini Mi II 54596 Series, Clip Mount, 18.8468mm × 5.7912mm
Available Stock
11,649
Estimated Ship Time:7-9 working days
22+
926+$0.0627
10,000+$0.0605
- +
Ext. Price(USD):$58.06
MOQ:926
Mult:1
SPQ:1
Molex
ECAD Model:
7-Pin TPA Connector, 21.9mm × 8.85mm
Available Stock
10,000
Estimated Ship Time:7-9 working days
20+
2,500+$0.0462
13,000+$0.0451
25,000+$0.044
- +
Ext. Price(USD):$115.50
MOQ:2,500
Mult:1
SPQ:1
3M
ECAD Model:
3M Stress Relief Clamp, For 2500 Series
Available Stock
700
Estimated Ship Time:5-10 working days
10+$1.0477
250+$1.0159
750+$0.9853
2,000+$0.9662
4,000+$0.9407
- +
Ext. Price(USD):$10.47
MOQ:10
Mult:10
25 / PageGoto