Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
4-Pin Wedge for Pins, ATP Series™
Available Stock
683
Estimated Ship Time:6-13 working days
25+$0.4796
100+$0.4389
5,225+$0.2851
10,175+$0.2776
- +
Ext. Price(USD):$14.38
MOQ:30
Mult:1
SPQ:1
1-Pin Mounting Base DMC-MD Inserts, Bracket Mount, TH
Available Stock
1,098
Estimated Ship Time:7-9 working days
17+
7+$16.39
17+$16.093
500+$13.662
1,000+$12.496
- +
Ext. Price(USD):$114.73
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
Wire Guide stAK50h Series 19.15mm (L)
Available Stock
19,263
Estimated Ship Time:6-13 working days
25+$0.2519
100+$0.2392
6,000+$0.176
10,800+$0.1307
- +
Ext. Price(USD):$14.10
MOQ:56
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
96
Estimated Ship Time:5-10 working days
1+$1.5041
10+$1.4531
100+$1.3893
- +
Ext. Price(USD):$7.52
MOQ:5
Mult:1
TE Connectivity Automotive Connector TPA Lock, EconoSeal III Series, 2-Way
Available Stock
2,700
Estimated Ship Time:7-10 working days
20+
850+$0.1342
2,200+$0.1177
4,400+$0.1144
5,000+$0.11
- +
Ext. Price(USD):$114.07
MOQ:850
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Backshell MultiCat Housings
Available Stock
1,816
Estimated Ship Time:9-14 working days
1+$3.8772
10+$3.2972
600+$2.469
1,000+$2.4393
- +
Ext. Price(USD):$27.14
MOQ:7
Mult:1
SPQ:1
Ejector Latch, AMP-LATCH Series
Available Stock
18,444
Estimated Ship Time:5-12 working days
50+$0.7452
250+$0.638
7,500+$0.5735
10,000+$0.5725
- +
Ext. Price(USD):$37.26
MOQ:50
Mult:1
SPQ:20,000
Cap Cover Dust MTC Series
Available Stock
55
Estimated Ship Time:9-14 working days
50+$31.7861
100+$31.1504
500+$30.5275
1,000+$29.9169
2,000+$29.3186
- +
Ext. Price(USD):$1,589.30
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
Connector Accessories, Terminal Position Assurance, Straight, Nylon, Black, Gold Plated, Ultra-Fit™ Series, Bag
Available Stock
7,977
Estimated Ship Time:7-9 working days
22+
950+$0.0638
1,250+$0.0594
2,500+$0.0583
5,000+$0.0528
- +
Ext. Price(USD):$60.61
MOQ:950
Mult:1
SPQ:1
Molex
ECAD Model:
3pin Wedgelock ML-XT 93444 Housings
Available Stock
6,000
Estimated Ship Time:7-9 working days
20+
1,563+$0.0374
10,000+$0.0363
- +
Ext. Price(USD):$58.45
MOQ:1,563
Mult:1
SPQ:1
Molex
ECAD Model:
10-Pin Fixture 51111, 51112 Series Fixed Mount 24.75mm (L) × 6.1mm (H)
Available Stock
10,500
Estimated Ship Time:7-9 working days
14+
3,000+$0.0253
- +
Ext. Price(USD):$75.90
MOQ:3,000
Mult:1
SPQ:1
24-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
568
Estimated Ship Time:7-9 working days
19+
55+$2.024
150+$1.98
300+$1.947
550+$1.903
- +
Ext. Price(USD):$111.32
MOQ:55
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
147
Estimated Ship Time:7-9 working days
18+
6+$20.482
14+$20.097
27+$19.723
54+$19.338
100+$18.964
- +
Ext. Price(USD):$122.89
MOQ:6
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve, Receptacle, Plastic, For 1 Cable
Available Stock
110
Estimated Ship Time:5-10 working days
5+$1.7207
50+$1.6698
125+$1.6213
- +
Ext. Price(USD):$8.60
MOQ:5
Mult:5
9-Pin Terminal Position Assurance (TPA) Economy Power Series
Available Stock
35,600
Estimated Ship Time:7-9 working days
18+
2,000+$0.0726
4,000+$0.0671
25,000+$0.0583
- +
Ext. Price(USD):$145.20
MOQ:2,000
Mult:1,000
SPQ:1,000
Mounting Base, DMC-MD Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
5+$412.9855
10+$404.7257
50+$396.6306
100+$388.6982
500+$380.9241
- +
Ext. Price(USD):$2,064.92
MOQ:5
Mult:5
SPQ:1
HARTING
ECAD Model:
1P Single Row Header, Har-Modular Series, Right Angle
Available Stock
41
Estimated Ship Time:5-10 working days
1+$1.8227
10+$1.759
100+$1.6952
- +
Ext. Price(USD):$7.29
MOQ:4
Mult:1
Backshell, MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
1+$3,581.7984
10+$3,510.1631
100+$3,439.9594
500+$3,371.1602
1,000+$3,303.737
- +
Ext. Price(USD):$3,581.79
MOQ:1
Mult:1
SPQ:1
6-Pin Strain Relief, Universal MATE-N-LOK Series
Available Stock
1,632
Estimated Ship Time:9-14 working days
10+$1.823
25+$1.709
1,000+$1.317
3,000+$1.276
- +
Ext. Price(USD):$27.34
MOQ:15
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Backshell, MX150 Series
Available Stock
237
Estimated Ship Time:9-14 working days
1+$5.4864
10+$4.6634
1,200+$3.3261
3,000+$3.1181
- +
Ext. Price(USD):$27.43
MOQ:5
Mult:1
SPQ:1
7-Pin Shroud, AMPMODU MTE Series
Available Stock
73
Estimated Ship Time:7-9 working days
14+
50+$2.211
600+$2.211
50,000+$1.463
100,000+$1.364
- +
Ext. Price(USD):$110.55
MOQ:50
Mult:1
SPQ:1
Connector, 31-Pin, Secondary Lock
Available Stock
42,651
Estimated Ship Time:7-9 working days
21+
150+$1.034
300+$1.012
550+$1.001
1,100+$0.979
16,000+$0.957
- +
Ext. Price(USD):$155.10
MOQ:150
Mult:1
SPQ:1
Sealing Plugs for Connector
Available Stock
7,096
Estimated Ship Time:6-12 working days
100+$0.0778
- +
Ext. Price(USD):$25.05
MOQ:322
Mult:1
9-Pin Strain Relief, SMS Series
Available Stock
736
Estimated Ship Time:6-13 working days
1+$8.073
10+$6.985
1,000+$4.4496
2,000+$4.2012
- +
Ext. Price(USD):$16.14
MOQ:2
Mult:1
SPQ:1
JAE
ECAD Model:
JAE MX44 Series Automotive Connector Bracket, Front Cover
Available Stock
1,306
Estimated Ship Time:9-14 working days
10+$1.7075
25+$1.6006
1,000+$1.2334
3,000+$1.1414
- +
Ext. Price(USD):$27.32
MOQ:16
Mult:1
SPQ:1
25 / PageGoto