Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Jackscrew Mini-Box Series, Thread Mount
Available Stock
1,076
Estimated Ship Time:7-9 working days
20+
4+$29.887
10+$29.37
19+$28.853
37+$28.336
- +
Ext. Price(USD):$119.54
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
3pin Cable Holder Ribbon Cables Wire Mount 9.5mm × 10.5mm
Available Stock
125,000
Estimated Ship Time:7-9 working days
19+
1,667+$0.0352
18,000+$0.0341
38,000+$0.0319
97,000+$0.0308
- +
Ext. Price(USD):$58.67
MOQ:1,667
Mult:1
SPQ:1
Sleeve Plug-in Units, TH
Available Stock
4,750
Estimated Ship Time:5-10 working days
1+$15.8945
- +
Ext. Price(USD):$158.94
MOQ:10
Mult:10
4-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings, 21.99894mm × 5.4102mm × 4.35mm
Available Stock
20,795
Estimated Ship Time:5-12 working days
500+$0.1146
2,500+$0.1122
24,750+$0.053
33,000+$0.0519
- +
Ext. Price(USD):$57.30
MOQ:500
Mult:1
SPQ:5,500
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
1,748
Estimated Ship Time:6-13 working days
10+$1.1615
25+$0.9752
2,500+$0.6415
5,000+$0.608
- +
Ext. Price(USD):$15.09
MOQ:13
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin TPA Ultra-Fit Series
Available Stock
4,000
Estimated Ship Time:7-9 working days
20+
1,087+$0.0539
- +
Ext. Price(USD):$58.58
MOQ:1,087
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
226
Estimated Ship Time:6-13 working days
25+$0.2795
100+$0.2427
5,000+$0.1404
10,000+$0.1318
- +
Ext. Price(USD):$14.25
MOQ:51
Mult:1
SPQ:1
2pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
64
Estimated Ship Time:9-14 working days
1+$17.8524
10+$15.174
250+$12.0912
500+$11.5147
- +
Ext. Price(USD):$35.70
MOQ:2
Mult:1
SPQ:1
24-Pin Stress Relief, Series 101
Available Stock
511
Estimated Ship Time:9-14 working days
270+$0.0926
540+$0.0882
1,080+$0.0839
2,520+$0.0791
- +
Ext. Price(USD):$26.02
MOQ:281
Mult:1
SPQ:1
4-Pin Plug, Sealing Signal Double Lock Series
Available Stock
10,944
Estimated Ship Time:6-13 working days
25+$0.1909
100+$0.1656
5,000+$0.1037
8,000+$0.0886
- +
Ext. Price(USD):$14.12
MOQ:74
Mult:1
SPQ:1
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
19,194
Estimated Ship Time:7-9 working days
18+
1,500+$0.1089
3,000+$0.1067
5,500+$0.1045
10,500+$0.1023
- +
Ext. Price(USD):$163.35
MOQ:1,500
Mult:250
SPQ:250
TE Connectivity Washer, For Dynamic Series Thermocouple Connector
Available Stock
6,088
Estimated Ship Time:7-9 working days
16+
300+$0.517
850+$0.506
1,400+$0.495
4,400+$0.484
5,000+$0.341
- +
Ext. Price(USD):$155.10
MOQ:300
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
5,000
Estimated Ship Time:5-12 working days
250+$0.1469
2,500+$0.122
100,000+$0.0816
150,000+$0.0805
- +
Ext. Price(USD):$36.72
MOQ:250
Mult:1
SPQ:1
Mounting Base, DMC-M Series
Available Stock
37
Estimated Ship Time:5-12 working days
1+$951.5082
3+$945.238
5+$933.2112
- +
Ext. Price(USD):$951.50
MOQ:1
Mult:1
SPQ:1
4-Pin Strain Relief, Universal MATE-N-LOK Series
Available Stock
47,881
Estimated Ship Time:7-9 working days
22+
150+$0.814
350+$0.803
700+$0.792
1,400+$0.77
2,000+$0.759
- +
Ext. Price(USD):$122.10
MOQ:150
Mult:1
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 6-Ch
Available Stock
775
Estimated Ship Time:5-10 working days
25+$0.3742
100+$0.3533
250+$0.335
500+$0.3289
- +
Ext. Price(USD):$9.35
MOQ:25
Mult:25
Mounting Base DMC-MD Inserts Panel Mount
Available Stock
298
Estimated Ship Time:5-12 working days
1+$38.364
25+$28.7616
150+$27.8093
200+$25.145
- +
Ext. Price(USD):$38.36
MOQ:1
Mult:1
SPQ:1
Mounting Base DMC-M Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
2+$594.7452
10+$582.8512
50+$571.1943
100+$559.7705
500+$548.575
- +
Ext. Price(USD):$1,189.49
MOQ:2
Mult:2
SPQ:1
Wire Seal, 2mm, Elastomer
Available Stock
18,359
Estimated Ship Time:9-14 working days
50+$0.091
- +
Ext. Price(USD):$26.02
MOQ:286
Mult:1
SPQ:1
26-Pin Cap (Cover) MCP Series, 29.2mm W × 29.3mm H
Available Stock
812
Estimated Ship Time:6-13 working days
1+$2.921
10+$2.484
2,700+$1.5444
5,100+$1.4796
- +
Ext. Price(USD):$14.60
MOQ:5
Mult:1
SPQ:1
20-Pin Cap (Cover), 0600 Series Header, SMD
Available Stock
48
Estimated Ship Time:9-14 working days
1+$6.4584
10+$5.4864
1,000+$3.9637
2,500+$3.7158
- +
Ext. Price(USD):$32.29
MOQ:5
Mult:1
SPQ:1
15-Pin Strain Relief Universal MATE-N-LOK Series 38.86mm L
Available Stock
716
Estimated Ship Time:6-13 working days
1+$2.7485
10+$2.3345
2,500+$1.4688
5,000+$1.4148
- +
Ext. Price(USD):$16.49
MOQ:6
Mult:1
SPQ:1
16-Pin Strain Relief, Clamp Mount
Available Stock
10,805
Estimated Ship Time:7-9 working days
18+
450+$0.2728
1,100+$0.2684
2,100+$0.264
4,100+$0.2585
10,000+$0.2354
- +
Ext. Price(USD):$122.76
MOQ:450
Mult:1
SPQ:1
2-Pin Ferrite Bead SQUIB Series
Available Stock
3,200
Estimated Ship Time:9-14 working days
1+$0.715
10+$0.6032
1,000+$0.3622
2,600+$0.3386
- +
Ext. Price(USD):$26.40
MOQ:59
Mult:1
SPQ:1
3M
ECAD Model:
Pull Tab, 3000 Series, 50.8mm × 50.8mm × 76.2mm
Available Stock
1,652
Estimated Ship Time:6-13 working days
1+$1.8515
10+$1.6215
2,000+$1.0627
5,000+$0.9925
- +
Ext. Price(USD):$14.81
MOQ:8
Mult:1
SPQ:1
25 / PageGoto