Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
182
Estimated Ship Time:5-10 working days
1+$1.1854
10+$1.1344
100+$1.1089
- +
Ext. Price(USD):$7.11
MOQ:6
Mult:1
Rear Housing MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
1+$6,411.1716
10+$6,282.9432
100+$6,157.2842
500+$6,034.1386
1,000+$5,913.4558
- +
Ext. Price(USD):$6,411.17
MOQ:1
Mult:1
SPQ:1
Backshell MTC Series 96.77mm(L)
Available Stock
9
Estimated Ship Time:7-9 working days
16+
5+$95.48
- +
Ext. Price(USD):$477.40
MOQ:5
Mult:5
SPQ:5
Molex
ECAD Model:
48-Pin Shroud C-Grid SL Series Wire Mount 78.33mm(L) × 27.56mm(H)
Available Stock
50
Estimated Ship Time:9-14 working days
50+$20.156
100+$19.7529
500+$19.3578
1,000+$18.9706
5,000+$18.5912
- +
Ext. Price(USD):$1,007.80
MOQ:50
Mult:50
SPQ:1
Sealing Plug, Circular Connector
Available Stock
26,822
Estimated Ship Time:6-12 working days
100+$0.0404
- +
Ext. Price(USD):$25.00
MOQ:619
Mult:1
16-Pin Cap (Cover) 0600 Series Header SMD 16.5mm H
Available Stock
80
Estimated Ship Time:9-14 working days
1+$3.9096
10+$3.3242
1,000+$2.4016
2,500+$2.2513
- +
Ext. Price(USD):$27.36
MOQ:7
Mult:1
SPQ:1
Neutrik
ECAD Model:
Neutrik Soft Plastic Cover, opticalCON QUAD Series, For D-Size Chassis Connector
Available Stock
888
Estimated Ship Time:5-10 working days
1+$2.9444
15+$2.8934
75+$2.613
- +
Ext. Price(USD):$8.83
MOQ:3
Mult:1
Polarizing Device (Key, Plug, Post), AMPMODU Mod II & IV Series
Available Stock
5,458
Estimated Ship Time:6-13 working days
10+$0.6475
25+$0.5785
5,000+$0.3629
10,000+$0.3607
- +
Ext. Price(USD):$14.24
MOQ:22
Mult:1
SPQ:1
6-Pin Cap (Cover) Housing MCP Series
Available Stock
380
Estimated Ship Time:7-9 working days
13+
200+$0.583
- +
Ext. Price(USD):$116.60
MOQ:200
Mult:1
SPQ:1
AMPMODU 50/50 Grid Series Cap (Cover), 20-Pin, 20.7mm L
Available Stock
600
Estimated Ship Time:7-9 working days
18+
40+$2.816
100+$2.772
200+$2.717
400+$2.673
- +
Ext. Price(USD):$112.64
MOQ:40
Mult:1
SPQ:1
HARTING
ECAD Model:
HARTING IDC Tool, Extraction and Insertion Tool
Available Stock
3,910
Estimated Ship Time:6-13 working days
25+$0.3795
300+$0.3498
1,000+$0.3024
2,500+$0.2776
10,000+$0.2743
- +
Ext. Price(USD):$14.04
MOQ:37
Mult:1
SPQ:1
Molex
ECAD Model:
7-Pin Cable Holder, Ribbon Cables, Wire Mount
Available Stock
75,000
Estimated Ship Time:7-9 working days
18+
2,000+$0.0506
7,000+$0.0462
14,000+$0.0429
- +
Ext. Price(USD):$101.20
MOQ:2,000
Mult:1
SPQ:1
DT Dust Cap, Protects Unmated Connector Interfaces, Plastic/Thermoplastic for Deutch DT Connectors
Available Stock
458
Estimated Ship Time:5-12 working days
100+$0.3581
500+$0.3255
25,000+$0.2764
50,000+$0.2692
- +
Ext. Price(USD):$35.81
MOQ:100
Mult:1
SPQ:1
Available Stock
814
Estimated Ship Time:5-12 working days
25+$1.1949
50+$1.1614
750+$0.7725
1,000+$0.7576
- +
Ext. Price(USD):$31.06
MOQ:26
Mult:1
SPQ:500
Strain Relief Connector 8-Pin Universal MATE-N-LOK Series
Available Stock
906
Estimated Ship Time:6-13 working days
1+$3.2545
10+$2.838
250+$1.5444
5,000+$1.4472
- +
Ext. Price(USD):$16.27
MOQ:5
Mult:1
SPQ:1
16-Pin Cap Cover, Strain Relief MTA-156 Series, Board Mount
Available Stock
2,197
Estimated Ship Time:7-9 working days
09+
500+$0.374
1,000+$0.3047
- +
Ext. Price(USD):$187.00
MOQ:500
Mult:125
SPQ:125
3M
ECAD Model:
34pin Retainer Clip 2500 Series Panel Mount
Available Stock
1,775
Estimated Ship Time:9-14 working days
10+$1.3889
25+$1.3012
1,000+$1.0029
2,500+$0.9401
- +
Ext. Price(USD):$26.38
MOQ:19
Mult:1
SPQ:1
TE Connectivity Stress Relief, Universal MATE-N-LOK Series, For MATE-N-LOK Series
Available Stock
130
Estimated Ship Time:5-10 working days
5+$0.9458
25+$0.9101
- +
Ext. Price(USD):$9.45
MOQ:10
Mult:5
ITT Cannon
ECAD Model:
3-Pin Hood and Strain Relief Trident Rectangular Plugs
Available Stock
300
Estimated Ship Time:7-9 working days
22+
40+$2.761
100+$2.761
200+$2.09
- +
Ext. Price(USD):$110.44
MOQ:40
Mult:1
SPQ:1
14-Pin Strain Relief DIP Connectors, TH
Available Stock
1,500
Estimated Ship Time:5-12 working days
100+$0.1848
1,000+$0.1704
50,000+$0.1552
100,000+$0.154
- +
Ext. Price(USD):$36.96
MOQ:200
Mult:100
SPQ:100
2.5mm Sealed Connector: TPAs, Signal Double Lock Connectors
Available Stock
14,965
Estimated Ship Time:6-13 working days
25+$0.2565
100+$0.2438
5,000+$0.1739
10,000+$0.1663
- +
Ext. Price(USD):$14.10
MOQ:55
Mult:1
SPQ:1
Molex
ECAD Model:
3pin Retainer
Available Stock
64,291
Estimated Ship Time:7-9 working days
21+
2,703+$0.0429
7,000+$0.0418
10,000+$0.0396
20,000+$0.0352
50,000+$0.0341
- +
Ext. Price(USD):$115.95
MOQ:2,703
Mult:1
SPQ:1
Shell 20-Pin
Available Stock
18
Estimated Ship Time:7-9 working days
24+
1+$285.714
2+$280.577
100+$144.034
250+$134.266
- +
Ext. Price(USD):$285.71
MOQ:1
Mult:1
SPQ:1
2-Pin Cap (Cover) 9176 Series, 8mm L × 6.3mm H
Available Stock
3,785
Estimated Ship Time:6-13 working days
25+$0.4236
100+$0.3864
5,000+$0.2938
10,000+$0.2848
- +
Ext. Price(USD):$26.68
MOQ:63
Mult:1
SPQ:1
Molex
ECAD Model:
18-Pin Shroud C-Grid SL Series Wire Mount 40.23mm × 27.56mm H
Available Stock
7,262
Estimated Ship Time:7-9 working days
23+
150+$1.353
300+$1.331
1,600+$1.1
4,000+$1.078
- +
Ext. Price(USD):$202.95
MOQ:150
Mult:1
SPQ:1
25 / PageGoto