Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
6-Pin Retention Key Mini-Fit Sr Series Wire Mount
Available Stock
10,184
Estimated Ship Time:6-13 working days
1+$1.564
10+$1.3225
1,000+$0.8467
2,500+$0.7938
- +
Ext. Price(USD):$14.54
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Terminal Position Assurance Retainer Right Angle Polyester Gray MicroClasp™ Bag
Available Stock
10,340
Estimated Ship Time:7-9 working days
24+
506+$0.231
1,300+$0.2266
2,600+$0.2211
5,100+$0.2178
8,000+$0.2134
- +
Ext. Price(USD):$116.88
MOQ:506
Mult:1
SPQ:1
3M
ECAD Model:
Polarizing Device (Key, Plug, Post)
Available Stock
696
Estimated Ship Time:9-14 working days
1+$0.559
10+$0.4758
1,000+$0.2857
3,000+$0.2643
- +
Ext. Price(USD):$26.11
MOQ:74
Mult:1
SPQ:1
Panel Mount Frame
Available Stock
62
Estimated Ship Time:9-14 working days
1+$13.2948
10+$11.2979
25+$10.5896
- +
Ext. Price(USD):$26.58
MOQ:2
Mult:1
SPQ:1
Jackscrew Box Series, Thread Mount
Available Stock
237
Estimated Ship Time:7-9 working days
11+
4+$31.603
- +
Ext. Price(USD):$126.41
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Cable Holder, Ribbon Cables, Wire Mount, 25mm L × 3.8mm H
Available Stock
28,500
Estimated Ship Time:7-9 working days
20+
2,000+$0.0352
10,000+$0.033
20,000+$0.0308
- +
Ext. Price(USD):$70.40
MOQ:2,000
Mult:1
SPQ:1
2pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
6
Estimated Ship Time:9-14 working days
1+$17.496
10+$14.8705
500+$11.2847
1,000+$10.7469
- +
Ext. Price(USD):$34.99
MOQ:2
Mult:1
SPQ:1
16-Pin Plug, Sealing Mini-Universal MATE-N-LOK Series, Adhesive Mount, 34.7mm L × 9.8mm H
Available Stock
7,757
Estimated Ship Time:9-14 working days
1+$5.184
10+$4.4075
1,200+$3.144
3,600+$2.9098
- +
Ext. Price(USD):$31.10
MOQ:6
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93445 Housing Edge Mount
Available Stock
19,851
Estimated Ship Time:7-9 working days
19+
439+$0.1331
5,000+$0.1287
10,000+$0.1221
- +
Ext. Price(USD):$58.43
MOQ:439
Mult:1
SPQ:1
2-Pin Assembly Module, Universal MATE-N-LOK Series
Available Stock
3,052
Estimated Ship Time:6-13 working days
10+$0.7878
25+$0.7199
1,000+$0.4093
5,000+$0.405
- +
Ext. Price(USD):$14.18
MOQ:18
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
750
Estimated Ship Time:6-13 working days
10+$0.8522
25+$0.8039
2,800+$0.5746
5,200+$0.5713
- +
Ext. Price(USD):$14.48
MOQ:17
Mult:1
SPQ:1
3M
ECAD Model:
40-Pin Retainer Clip, 2500 Series, Mounting, 7.9mm L × 7.9mm W
Available Stock
5,876
Estimated Ship Time:6-13 working days
1+$1.932
10+$1.6445
300+$1.2096
1,000+$1.1016
- +
Ext. Price(USD):$15.45
MOQ:8
Mult:1
SPQ:1
40-Pin Shroud Mini CT Series Base Mount
Available Stock
7,487
Estimated Ship Time:7-9 working days
10+
300+$0.528
1,200+$0.517
2,100+$0.506
- +
Ext. Price(USD):$158.40
MOQ:300
Mult:1
SPQ:1
Available Stock
3,750
Estimated Ship Time:5-12 working days
5+$7.2565
25+$6.215
1,000+$5.5854
2,500+$5.4891
- +
Ext. Price(USD):$36.28
MOQ:5
Mult:1
SPQ:1
HARTING
ECAD Model:
Pin Header, 1-Pin, Har-Modular Series, Right Angle
Available Stock
100
Estimated Ship Time:6-12 working days
10+$1.1269
25+$1.0962
500+$1.0564
2,500+$1.0154
- +
Ext. Price(USD):$25.91
MOQ:23
Mult:1
12-Pin Seal DTM Series
Available Stock
3,838
Estimated Ship Time:6-13 working days
1+$2.139
10+$1.8055
2,500+$1.1232
5,000+$1.0649
- +
Ext. Price(USD):$14.97
MOQ:7
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
29
Estimated Ship Time:9-14 working days
10+$164.2583
100+$160.9736
200+$157.7541
500+$154.5991
1,000+$151.5071
- +
Ext. Price(USD):$1,642.58
MOQ:10
Mult:10
SPQ:1
ITT Cannon
ECAD Model:
6-Pin Hood with Strain Relief for Trident Rectangular Plugs
Available Stock
283
Estimated Ship Time:5-12 working days
5+$4.439
50+$3.795
2,500+$2.0544
5,000+$1.7869
- +
Ext. Price(USD):$31.07
MOQ:7
Mult:1
SPQ:100
8-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
35,060
Estimated Ship Time:7-9 working days
01+
200+$0.627
450+$0.616
10,000+$0.495
25,000+$0.473
- +
Ext. Price(USD):$125.40
MOQ:200
Mult:1
SPQ:1
2-Pin Commoning Bar, MR Series, 7.75mm L
Available Stock
2
Estimated Ship Time:6-13 working days
1+$7.1415
100+$6.6528
1,000+$3.5856
2,000+$3.5316
- +
Ext. Price(USD):$14.28
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
48-Pin Cap (Cover) CMC Connectors
Available Stock
1,000
Estimated Ship Time:7-9 working days
13+
222+$0.264
- +
Ext. Price(USD):$58.60
MOQ:222
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
1,555
Estimated Ship Time:6-13 working days
10+$0.7337
25+$0.6716
5,000+$0.3834
10,000+$0.3748
- +
Ext. Price(USD):$14.67
MOQ:20
Mult:1
SPQ:1
2.5mm Sealed Connector: TPAs, Signal Double Lock Connectors
Available Stock
2,500
Estimated Ship Time:7-9 working days
21+
758+$0.1452
7,500+$0.1452
50,000+$0.0825
100,000+$0.0704
- +
Ext. Price(USD):$110.06
MOQ:758
Mult:1
SPQ:1
Molex
ECAD Model:
16-Pin Shroud C-Grid SL Series, Wire Mount, 37.69mm × 27.56mm × 7.11mm
Available Stock
3,288
Estimated Ship Time:7-9 working days
22+
97+$1.21
250+$1.188
500+$1.166
900+$1.122
2,000+$0.979
- +
Ext. Price(USD):$117.37
MOQ:97
Mult:1
SPQ:1
Molex
ECAD Model:
24-Pin Shroud C-Grid SL Series Wire Mount 47.85mm L
Available Stock
571
Estimated Ship Time:9-14 working days
1+$3.8016
10+$3.2303
1,000+$2.3336
2,500+$2.1876
- +
Ext. Price(USD):$26.61
MOQ:7
Mult:1
SPQ:1
25 / PageGoto