Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
1,534
Estimated Ship Time:6-13 working days
10+$1.0534
25+$0.9442
2,500+$0.621
5,000+$0.6199
- +
Ext. Price(USD):$14.74
MOQ:14
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
1+$3,489.9444
10+$3,420.1505
100+$3,351.7471
500+$3,284.7121
1,000+$3,219.0178
- +
Ext. Price(USD):$3,489.94
MOQ:1
Mult:1
SPQ:1
AMPMODU MTE Series Connector Shroud 22-Pin SMD 32.63mm L
Available Stock
1,501
Estimated Ship Time:5-12 working days
10+$8.6128
100+$8.2069
1,875+$2.9639
2,500+$2.8997
- +
Ext. Price(USD):$86.12
MOQ:10
Mult:1
SPQ:1
Available Stock
28
Estimated Ship Time:6-13 working days
1+$27.784
10+$21.1248
100+$18.846
260+$18.5976
- +
Ext. Price(USD):$27.78
MOQ:1
Mult:1
SPQ:1
8-Pin TPA SGI Series
Available Stock
580
Estimated Ship Time:5-10 working days
50+$0.102
100+$0.0943
200+$0.0841
500+$0.0803
- +
Ext. Price(USD):$7.14
MOQ:70
Mult:10
42-Pin Plug, Sealing Mount 56.2mm L
Available Stock
3,930
Estimated Ship Time:6-13 working days
1+$2.6795
10+$2.3345
250+$1.7928
2,500+$1.3176
- +
Ext. Price(USD):$16.07
MOQ:6
Mult:1
SPQ:1
Cable Clamp ST Series, Bracket Mount, Wire Mount
Available Stock
1,981
Estimated Ship Time:6-13 working days
1+$0.7245
10+$0.6199
5,000+$0.3683
10,000+$0.3629
- +
Ext. Price(USD):$14.38
MOQ:26
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
3-Pin Wedgelock IT Series Connector
Available Stock
184,083
Estimated Ship Time:7-9 working days
22+
950+$0.1166
4,800+$0.1111
9,500+$0.1067
47,200+$0.1034
141,600+$0.0979
- +
Ext. Price(USD):$110.77
MOQ:950
Mult:1
SPQ:1
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
2,376
Estimated Ship Time:6-13 working days
1+$2.9555
10+$2.507
1,000+$1.6956
2,000+$1.566
- +
Ext. Price(USD):$14.77
MOQ:5
Mult:1
SPQ:1
24-Pin Shell, Sumicon 1600 Series Connector
Available Stock
9
Estimated Ship Time:6-13 working days
1+$25.6335
10+$20.4444
100+$17.388
200+$16.6644
- +
Ext. Price(USD):$25.63
MOQ:1
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
789
Estimated Ship Time:6-13 working days
10+$0.736
25+$0.6739
5,000+$0.3704
10,000+$0.3618
- +
Ext. Price(USD):$14.72
MOQ:20
Mult:1
SPQ:1
2-Pin Strain Relief Universal MATE-N-LOK Series Wire Mount
Available Stock
7,137
Estimated Ship Time:9-14 working days
10+$1.8565
25+$1.7401
1,000+$1.3409
2,500+$1.257
- +
Ext. Price(USD):$27.84
MOQ:15
Mult:1
SPQ:1
Rectangular IDC Connectors, 16.5mm H
Available Stock
3,579
Estimated Ship Time:7-9 working days
17+
45+$2.684
150+$2.64
250+$2.596
450+$2.541
- +
Ext. Price(USD):$120.78
MOQ:45
Mult:1
SPQ:1
18-Pin Cap (Cover), Front AMPMODU MT Series, 22.86mm L × 19.05mm H
Available Stock
7,167
Estimated Ship Time:7-9 working days
23+
85+$1.309
250+$1.287
450+$1.265
850+$1.243
- +
Ext. Price(USD):$111.26
MOQ:85
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Backshell, MX150 Series
Available Stock
493
Estimated Ship Time:7-10 working days
25+
65+$1.991
150+$1.903
6,000+$1.408
15,000+$1.397
- +
Ext. Price(USD):$129.41
MOQ:65
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
244
Estimated Ship Time:5-12 working days
1+$73.6736
10+$47.762
150+$42.2971
200+$41.8798
- +
Ext. Price(USD):$73.67
MOQ:1
Mult:1
SPQ:1
Sealing Plug, Circular Connector
Available Stock
2,775
Estimated Ship Time:6-12 working days
100+$0.1013
- +
Ext. Price(USD):$25.02
MOQ:247
Mult:1
Amphenol
ECAD Model:
2-Pin Wedge for Sockets, AT Series, Bracket Mount
Available Stock
4,121
Estimated Ship Time:5-10 working days
25+$0.2039
- +
Ext. Price(USD):$6.52
MOQ:32
Mult:1
11-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
10,833
Estimated Ship Time:7-9 working days
11+
450+$0.253
1,300+$0.2486
2,000+$0.2343
10,000+$0.1804
- +
Ext. Price(USD):$113.85
MOQ:450
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Positioning Assembly (TPA), 4-Pos, Ultra-Fit Series
Available Stock
32,786
Estimated Ship Time:7-9 working days
21+
950+$0.0638
2,000+$0.0594
4,000+$0.0572
5,000+$0.0517
10,000+$0.0495
- +
Ext. Price(USD):$60.61
MOQ:950
Mult:1
SPQ:1
40-Pin Cap (Cover) AMPMODU Mod IV Series, 63.27mm L
Available Stock
1,543
Estimated Ship Time:6-13 working days
1+$7.8775
10+$6.82
500+$4.9356
1,000+$4.3416
- +
Ext. Price(USD):$15.75
MOQ:2
Mult:1
SPQ:1
21-Pin Cap (Cap) AMPMODU Connector
Available Stock
5,833
Estimated Ship Time:7-9 working days
23+
20+$5.962
50+$5.863
2,500+$4.851
5,000+$4.565
- +
Ext. Price(USD):$119.24
MOQ:20
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Position Assurance (TPA) Header, 2-Pin, L1NK Series, Part No. 396-207458, 7.6mm H
Available Stock
30,842
Estimated Ship Time:7-9 working days
20+
1,725+$0.0671
4,400+$0.066
8,700+$0.0649
15,000+$0.0627
30,000+$0.055
- +
Ext. Price(USD):$115.74
MOQ:1,725
Mult:1
SPQ:1
JAE
ECAD Model:
109-Pin Cap (Cover), MX60A Series
Available Stock
24
Estimated Ship Time:9-14 working days
1+$5.9292
10+$5.0339
1,000+$3.6368
2,500+$3.4093
- +
Ext. Price(USD):$29.64
MOQ:5
Mult:1
SPQ:1
Harwin
ECAD Model:
20-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
153
Estimated Ship Time:9-14 working days
1+$126.7704
10+$107.7581
25+$101.018
50+$96.2027
100+$91.6177
- +
Ext. Price(USD):$126.77
MOQ:1
Mult:1
SPQ:1
25 / PageGoto