Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
29
Estimated Ship Time:9-14 working days
10+$210.6886
100+$206.4748
200+$202.3453
500+$198.2985
1,000+$194.3325
- +
Ext. Price(USD):$2,106.88
MOQ:10
Mult:10
SPQ:1
3M
ECAD Model:
3M Stress Relief Clamp, 3505 Series
Available Stock
1,500
Estimated Ship Time:5-10 working days
10+$1.1612
250+$1.1255
750+$1.0924
2,000+$1.063
4,000+$1.0477
- +
Ext. Price(USD):$11.61
MOQ:10
Mult:10
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
16
Estimated Ship Time:6-13 working days
1+$3.0245
10+$2.6795
1,000+$1.6956
2,000+$1.566
- +
Ext. Price(USD):$15.12
MOQ:5
Mult:1
SPQ:1
4-Pin Wedgelock DT-XT Series Plugs
Available Stock
5,971
Estimated Ship Time:7-9 working days
22+
150+$0.682
500+$0.638
5,000+$0.2739
10,000+$0.2013
- +
Ext. Price(USD):$102.30
MOQ:150
Mult:1
SPQ:1
1-Pin Adapter, Mounting
Available Stock
3,100
Estimated Ship Time:6-13 working days
1+$2.1735
10+$2.1275
25+$1.859
100+$1.7496
1,000+$1.4796
- +
Ext. Price(USD):$15.21
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Backshell, MX150 Series
Available Stock
380
Estimated Ship Time:7-10 working days
23+
46+$2.552
150+$2.508
250+$2.464
- +
Ext. Price(USD):$117.39
MOQ:46
Mult:1
SPQ:1
8-Pin Shield Micro Quadlok Series Wire Mount 12.2mm L
Available Stock
5,924
Estimated Ship Time:6-13 working days
25+$0.5417
100+$0.4939
4,500+$0.3715
9,000+$0.3596
- +
Ext. Price(USD):$14.08
MOQ:26
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot, ATM Series
Available Stock
771
Estimated Ship Time:6-13 working days
10+$0.8855
25+$0.8246
2,800+$0.5422
5,200+$0.5368
- +
Ext. Price(USD):$14.16
MOQ:16
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
2+$846.6066
10+$829.6733
50+$813.0804
100+$796.8187
500+$780.8824
- +
Ext. Price(USD):$1,693.21
MOQ:2
Mult:2
SPQ:1
12-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
22,860
Estimated Ship Time:7-9 working days
15+
1,400+$0.0814
3,400+$0.0803
6,800+$0.0781
13,600+$0.077
20,000+$0.0759
- +
Ext. Price(USD):$113.96
MOQ:1,400
Mult:1
SPQ:1
Molex
ECAD Model:
6pin Shroud C-Grid SL Series Bracket Mount, Free Hanging
Available Stock
2,483
Estimated Ship Time:9-14 working days
10+$1.2917
25+$1.2109
1,000+$0.933
2,500+$0.8746
- +
Ext. Price(USD):$27.12
MOQ:21
Mult:1
SPQ:1
Blanking Plate, ARMORIPX™ Series
Available Stock
283
Estimated Ship Time:6-13 working days
1+$11.8795
10+$9.823
540+$7.3224
1,020+$6.6096
- +
Ext. Price(USD):$23.75
MOQ:2
Mult:1
SPQ:1
Connector Accessory 9-Pin Strain Relief MR (Miniature Rectangular) Series
Available Stock
631
Estimated Ship Time:6-13 working days
1+$6.969
10+$6.259
1,000+$3.996
2,000+$3.7584
- +
Ext. Price(USD):$20.90
MOQ:3
Mult:1
SPQ:1
TE Connectivity Heavy Duty Connector Rear Cover, Power Versa-Lock 5.0 Series, 3 Contacts
Available Stock
5,892
Estimated Ship Time:6-13 working days
25+$0.2116
100+$0.2024
6,000+$0.1458
8,000+$0.1307
- +
Ext. Price(USD):$14.17
MOQ:67
Mult:1
SPQ:1
12-Pin Cap (Cover), Strain Relief MTA-156 Series
Available Stock
1,643
Estimated Ship Time:6-13 working days
10+$0.6509
25+$0.5808
5,000+$0.3866
10,000+$0.364
- +
Ext. Price(USD):$14.31
MOQ:22
Mult:1
SPQ:1
Molex
ECAD Model:
50-Pin Shroud C-Grid SL Series, Wire Mount, 80.87mm L
Available Stock
7,900
Estimated Ship Time:7-9 working days
23+
26+$4.51
65+$4.433
2,000+$3.553
4,000+$3.344
- +
Ext. Price(USD):$117.26
MOQ:26
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector F 3 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
8,484
Estimated Ship Time:5-12 working days
500+$0.1975
1,000+$0.1896
50,000+$0.1454
100,000+$0.1419
- +
Ext. Price(USD):$98.75
MOQ:500
Mult:500
SPQ:500
HARTING
ECAD Model:
HARTING Coding Pin Kit, Code Pins, 0946 Series, Rated Current 16A, Rated Voltage 250V, 3-Way
Available Stock
20
Estimated Ship Time:9-14 working days
1+$21.9348
5+$20.3278
10+$19.6722
- +
Ext. Price(USD):$43.86
MOQ:2
Mult:1
SPQ:1
TE Connectivity DTM Wedge Locking Device for Connector Terminal Alignment
Available Stock
13,425
Estimated Ship Time:6-13 working days
25+$0.4658
100+$0.3883
5,000+$0.3197
10,000+$0.3056
- +
Ext. Price(USD):$14.43
MOQ:31
Mult:1
SPQ:1
3M
ECAD Model:
10-Pin Strain Relief 3000 Series 15.7mm (L) × 6.1mm (H)
Available Stock
42
Estimated Ship Time:9-14 working days
1+$3.445
10+$2.4322
1,000+$1.7569
2,500+$1.647
- +
Ext. Price(USD):$26.75
MOQ:11
Mult:1
SPQ:1
Cap (Cover), Protective HVP 800 Series, 1-Pin
Available Stock
1,151
Estimated Ship Time:7-10 working days
23+
110+$1.001
600+$1.001
1,200+$0.88
5,000+$0.847
10,000+$0.792
- +
Ext. Price(USD):$110.11
MOQ:110
Mult:1
SPQ:1
TE Connectivity Holder, Latch, AMPMODU Series, For 5102154-1 PCB Socket
Available Stock
6,269
Estimated Ship Time:6-13 working days
10+$0.7981
25+$0.6164
5,000+$0.4374
10,000+$0.4244
- +
Ext. Price(USD):$14.36
MOQ:18
Mult:1
SPQ:1
3M
ECAD Model:
24pin Retainer Clip 2500 Series Fixed mounting 38.7mm(Length)*2.54mm(height)
Available Stock
2,141
Estimated Ship Time:9-14 working days
10+$1.6405
25+$1.5371
1,000+$1.1846
3,000+$1.0963
- +
Ext. Price(USD):$26.24
MOQ:16
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot AT Series™
Available Stock
1,284
Estimated Ship Time:6-13 working days
10+$0.9476
25+$0.8579
1,200+$0.5951
2,700+$0.5054
- +
Ext. Price(USD):$14.21
MOQ:15
Mult:1
SPQ:1
Amphenol
ECAD Model:
Bootloader 8-Pin ATM Series
Available Stock
291
Estimated Ship Time:6-13 working days
10+$1.357
25+$1.221
2,800+$0.837
5,200+$0.8176
- +
Ext. Price(USD):$14.92
MOQ:11
Mult:1
SPQ:1
25 / PageGoto