Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Molex Mounting Bracket, CP-6.5 Series
Available Stock
60
Estimated Ship Time:5-10 working days
20+$0.1491
- +
Ext. Price(USD):$8.94
MOQ:60
Mult:20
28-Pin Wire Seal Electronic Control Module Sealed Connectors ECMSC Series Adhesive Mount
Available Stock
2,795
Estimated Ship Time:5-12 working days
25+$3.528
100+$3.454
1,200+$1.6264
1,600+$1.5943
- +
Ext. Price(USD):$88.20
MOQ:25
Mult:1
SPQ:1,600
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
3,965
Estimated Ship Time:6-13 working days
10+$1.2535
25+$1.144
1,000+$0.7441
2,500+$0.6415
- +
Ext. Price(USD):$15.04
MOQ:12
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
190
Estimated Ship Time:9-14 working days
1+$44.2044
10+$37.571
100+$31.9402
250+$29.9433
- +
Ext. Price(USD):$44.20
MOQ:1
Mult:1
SPQ:1
40-Pin Cap (Cover) AMPMODU Mod IV Series, 63.27mm L
Available Stock
2,100
Estimated Ship Time:7-9 working days
21+
30+$4.246
65+$4.18
150+$4.103
300+$4.026
1,000+$3.663
- +
Ext. Price(USD):$127.38
MOQ:30
Mult:1
SPQ:1
1-Pin Cap (Cover), 9177-600 Series Contacts
Available Stock
1,475
Estimated Ship Time:6-13 working days
25+$0.4608
100+$0.3899
5,600+$0.2565
10,400+$0.2463
- +
Ext. Price(USD):$26.72
MOQ:58
Mult:1
SPQ:1
Molex
ECAD Model:
Ditto Positive Lock TPA 1X2 V-0 HT
Available Stock
11,724
Estimated Ship Time:9-14 working days
100+$0.18
250+$0.1687
500+$0.1607
1,800+$0.1468
3,600+$0.1398
- +
Ext. Price(USD):$26.10
MOQ:145
Mult:1
SPQ:1
Requires flange for complete Dech DRB assembly. Multiple flanges available to meet design requirements.
Available Stock
949
Estimated Ship Time:6-13 working days
1+$26.45
10+$24.138
100+$21.6432
250+$21.1248
- +
Ext. Price(USD):$26.45
MOQ:1
Mult:1
SPQ:1
2pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
9
Estimated Ship Time:9-14 working days
1+$16.8912
10+$14.3521
500+$10.8914
1,000+$10.3722
- +
Ext. Price(USD):$33.78
MOQ:2
Mult:1
SPQ:1
2mm Receptacle Connector Strain Relief, Ribbon Cable, Glass-Filled Polyester, Latch, 14-50 Pins
Available Stock
3,240
Estimated Ship Time:9-14 working days
25+$0.7335
50+$0.6985
1,000+$0.5653
2,500+$0.5299
- +
Ext. Price(USD):$26.40
MOQ:36
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
40
Estimated Ship Time:5-10 working days
1+$1.5041
10+$1.4403
100+$1.3893
- +
Ext. Price(USD):$7.52
MOQ:5
Mult:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
1,061
Estimated Ship Time:6-13 working days
100+$0.0932
250+$0.0805
5,000+$0.0508
10,000+$0.0497
- +
Ext. Price(USD):$14.07
MOQ:151
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Backshell, MX150 Series
Available Stock
1,247
Estimated Ship Time:6-13 working days
1+$5.1865
10+$4.213
1,200+$2.7756
3,000+$2.754
- +
Ext. Price(USD):$15.55
MOQ:3
Mult:1
SPQ:1
4-Pin Cap (Cover), Dust Commercial MATE-N-LOK Series
Available Stock
4,568
Estimated Ship Time:7-9 working days
21+
750+$0.1529
1,800+$0.1507
3,600+$0.1474
- +
Ext. Price(USD):$114.67
MOQ:750
Mult:1
SPQ:1
6-Pin Cap (Cover), Dust SMD 25.8mm × 5.85mm × 5.5mm
Available Stock
8,659
Estimated Ship Time:7-9 working days
20+
60+$1.881
150+$1.848
300+$1.815
600+$1.782
5,000+$1.617
- +
Ext. Price(USD):$112.86
MOQ:60
Mult:1
SPQ:1
4-Pin Locking Plate Power Triple Lock Series, Board Mount
Available Stock
10,397
Estimated Ship Time:6-13 working days
25+$0.3255
100+$0.2959
5,000+$0.1663
10,000+$0.162
- +
Ext. Price(USD):$14.32
MOQ:44
Mult:1
SPQ:1
Molex
ECAD Model:
25-Pin Shroud C-Grid SL Series Wire Mount 79.85mm × 8.12mm H
Available Stock
18,755
Estimated Ship Time:7-9 working days
23+
100+$2.376
200+$2.332
6,000+$1.76
15,000+$1.661
- +
Ext. Price(USD):$237.60
MOQ:100
Mult:1
SPQ:1
Molex
ECAD Model:
30-Pin Shroud C-Grid SL Series, Wire Mount, 55.47mm L × 27.56mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8575
100+$10.6403
500+$10.4275
1,000+$10.219
5,000+$10.0146
- +
Ext. Price(USD):$542.87
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
2pin Wedgelock ML-XT 93444 Housings
Available Stock
6,546
Estimated Ship Time:7-9 working days
17+
1,316+$0.044
- +
Ext. Price(USD):$57.90
MOQ:1,316
Mult:1
SPQ:1
3M
ECAD Model:
16-Pin Strain Relief D89 Series 24.9mm L
Available Stock
1,651
Estimated Ship Time:6-13 working days
10+$0.613
25+$0.5474
5,000+$0.3218
10,000+$0.3132
- +
Ext. Price(USD):$14.23
MOQ:26
Mult:1
SPQ:1
20-Pin Holder AMPMODU MT Series Bracket Mount
Available Stock
7,279
Estimated Ship Time:7-9 working days
19+
1,000+$0.165
2,000+$0.1617
4,000+$0.1584
7,000+$0.1551
- +
Ext. Price(USD):$165.00
MOQ:1,000
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
28
Estimated Ship Time:9-14 working days
5+$268.4858
10+$263.115
50+$257.853
100+$252.6959
500+$247.642
- +
Ext. Price(USD):$1,342.42
MOQ:5
Mult:5
SPQ:1
Mounting Base DMC-MD Inserts, Wire Mount
Available Stock
83
Estimated Ship Time:7-9 working days
20+
5+$24.794
12+$24.332
23+$23.87
45+$23.419
- +
Ext. Price(USD):$123.97
MOQ:5
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) MTC Series 51.81mm L × 3.17mm H
Available Stock
29
Estimated Ship Time:9-14 working days
10+$115.3894
100+$113.0812
200+$110.8195
500+$108.6031
1,000+$106.4311
- +
Ext. Price(USD):$1,153.89
MOQ:10
Mult:10
SPQ:1
Cover
Available Stock
900
Estimated Ship Time:5-7 working days
20+
150+$3.1252
- +
Ext. Price(USD):$468.78
MOQ:150
Mult:150
SPQ:150
25 / PageGoto