Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
2-Pin Strain Relief Universal MATE-N-LOK Series
Available Stock
6,400
Estimated Ship Time:7-9 working days
26+
139+$0.792
8,400+$0.792
- +
Ext. Price(USD):$110.08
MOQ:139
Mult:1
SPQ:1
12-Pin Strain Relief MR (Miniature Rectangular) Series
Available Stock
1,097
Estimated Ship Time:6-13 working days
1+$6.8885
10+$5.995
200+$4.5252
500+$3.3804
- +
Ext. Price(USD):$20.66
MOQ:3
Mult:1
SPQ:1
Header, 24-Pin, 0600 Series, Cap (Cover), SMD
Available Stock
73
Estimated Ship Time:6-13 working days
1+$6.555
10+$5.368
1,000+$3.51
2,500+$3.3264
- +
Ext. Price(USD):$19.66
MOQ:3
Mult:1
SPQ:1
ECMSC Series Sealed Connector, Screw Mount, 20mm L
Available Stock
1,109
Estimated Ship Time:5-12 working days
10+$5.6896
500+$5.4249
7,500+$1.8725
10,000+$1.8404
- +
Ext. Price(USD):$56.89
MOQ:10
Mult:1
SPQ:1,000
6-Pin Strain Relief, MR (Miniature Rectangular) Series
Available Stock
446
Estimated Ship Time:7-9 working days
23+
35+$3.619
80+$3.564
200+$3.498
350+$3.432
- +
Ext. Price(USD):$126.66
MOQ:35
Mult:1
SPQ:1
JAE
ECAD Model:
10pin Strain Relief PS Series
Available Stock
20
Estimated Ship Time:5-10 working days
1+$0.6246
50+$0.5991
100+$0.5863
- +
Ext. Price(USD):$6.87
MOQ:11
Mult:1
TE Connectivity Connector Cover, MTA 156 Series
Available Stock
7,812
Estimated Ship Time:5-12 working days
1,000+$0.1598
3,000+$0.1492
100,000+$0.1323
150,000+$0.1319
- +
Ext. Price(USD):$159.80
MOQ:1,000
Mult:1,000
SPQ:1,000
Polarizing Device (Key, Plug, Post), MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
10+$110.9905
100+$108.7706
200+$106.5952
500+$104.4633
1,000+$102.374
- +
Ext. Price(USD):$1,109.90
MOQ:10
Mult:10
SPQ:1
Molex
ECAD Model:
Wire Seal, Mizu-P38 Series
Available Stock
878,000
Estimated Ship Time:7-9 working days
21+
2,000+$0.0385
16,000+$0.0374
80,000+$0.0363
100,000+$0.0341
- +
Ext. Price(USD):$77.00
MOQ:2,000
Mult:1
SPQ:1
Molex
ECAD Model:
Molex PCB Connector Housing, 7 Pos, 4.2mm Pitch, 1 Row
Available Stock
2,500
Estimated Ship Time:7-9 working days
20+
962+$0.121
2,500+$0.1188
16,000+$0.099
40,000+$0.0968
- +
Ext. Price(USD):$116.40
MOQ:962
Mult:1
SPQ:1
TE Connectivity DRB Wedge Locking Device, Ensures Terminal Calibration, Anti-Misinsertion, Snap-In Mount, Essential for DRB Connectors
Available Stock
717
Estimated Ship Time:6-13 working days
1+$2.599
10+$1.9895
1,000+$1.3608
2,500+$1.3392
- +
Ext. Price(USD):$15.59
MOQ:6
Mult:1
SPQ:1
3pin Cap (Cover), Strain Relief, 9176 Series
Available Stock
2,620
Estimated Ship Time:6-13 working days
25+$0.7308
100+$0.6314
5,000+$0.4192
10,000+$0.3989
- +
Ext. Price(USD):$27.03
MOQ:37
Mult:1
SPQ:1
Dust Cover Cap for DMC-MD Inserts
Available Stock
75
Estimated Ship Time:9-14 working days
2+$125.2746
10+$119.0106
1,000+$96.9375
10,000+$92.0894
- +
Ext. Price(USD):$250.54
MOQ:2
Mult:2
SPQ:1
Header 14-Pin Cap (Cover) 0600 Series SMD
Available Stock
73
Estimated Ship Time:9-14 working days
1+$3.9096
10+$3.3242
1,000+$2.4016
2,500+$2.2513
- +
Ext. Price(USD):$27.36
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Terminal Position Assurance Straight Nylon Black Bag
Available Stock
6,351
Estimated Ship Time:6-13 working days
25+$0.1472
100+$0.138
4,500+$0.1145
9,000+$0.0983
- +
Ext. Price(USD):$14.07
MOQ:102
Mult:1
SPQ:1
WATERPROOF POWER SUPPLY/SIGNAL H
Available Stock
20
Estimated Ship Time:9-14 working days
1+$107.4816
20+$87.007
40+$82.8587
60+$80.5246
100+$77.6787
- +
Ext. Price(USD):$107.48
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
Strain Relief 24-Pin 4600 Series 41.9mm L × 6.1mm H
Available Stock
431
Estimated Ship Time:9-14 working days
10+$2.5196
25+$2.3613
1,000+$1.8201
2,500+$1.7062
- +
Ext. Price(USD):$27.71
MOQ:11
Mult:1
SPQ:1
HARTING
ECAD Model:
HARTING Stress Relief Clamp for SEK Series
Available Stock
405
Estimated Ship Time:9-14 working days
1+$1.339
10+$1.1349
1,000+$0.6812
2,500+$0.6385
- +
Ext. Price(USD):$26.51
MOQ:30
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
1+$1,705.266
10+$1,671.1596
50+$1,637.736
100+$1,604.9812
500+$1,572.8816
- +
Ext. Price(USD):$1,705.26
MOQ:1
Mult:1
SPQ:1
10-Pin Plug, Sealing Mini-Universal MATE-N-LOK Series, Adhesive Mount
Available Stock
1,670
Estimated Ship Time:6-13 working days
1+$4.623
10+$3.729
1,000+$2.754
1,600+$2.4624
- +
Ext. Price(USD):$18.49
MOQ:4
Mult:1
SPQ:1
2-Pin Commoning Bar, MR (Miniature Rectangular) Series
Available Stock
4,275
Estimated Ship Time:6-13 working days
25+$0.3186
100+$0.2904
5,000+$0.202
10,000+$0.1868
- +
Ext. Price(USD):$14.01
MOQ:44
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
300
Estimated Ship Time:7-9 working days
20+
100+$1.188
200+$1.001
400+$0.836
1,000+$0.704
- +
Ext. Price(USD):$118.80
MOQ:100
Mult:1
SPQ:1
Molex
ECAD Model:
34-Pin Shroud, C-Grid SL Series, Bracket Mount, Free Hanging, 47.39mm L × 19.05mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
3M
ECAD Model:
Strain Relief 44-Pin 891 Series 60.5mm L × 6.1mm H
Available Stock
606
Estimated Ship Time:6-13 working days
10+$0.5842
25+$0.521
5,000+$0.3553
10,000+$0.338
- +
Ext. Price(USD):$14.06
MOQ:27
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Bracket Mount, Panel Mount
Available Stock
28
Estimated Ship Time:9-14 working days
5+$215.3606
10+$211.0547
50+$206.8332
100+$202.6965
500+$198.6426
- +
Ext. Price(USD):$1,076.80
MOQ:5
Mult:5
SPQ:1
25 / PageGoto