Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
5-Pin Strain Relief, Universal MATE-N-LOK II Series
Available Stock
5,769
Estimated Ship Time:6-13 working days
1+$2.438
10+$2.1735
2,300+$1.3176
4,600+$1.2528
- +
Ext. Price(USD):$14.62
MOQ:6
Mult:1
SPQ:1
9-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
2,415
Estimated Ship Time:6-13 working days
25+$0.406
100+$0.3696
5,000+$0.2365
10,000+$0.2246
- +
Ext. Price(USD):$14.21
MOQ:35
Mult:1
SPQ:1
Harwin
ECAD Model:
26-Pin Backshell, Gecko Series, Free Hanging
Available Stock
146
Estimated Ship Time:9-14 working days
1+$138.5748
10+$117.7988
25+$110.4313
50+$105.1674
100+$100.1549
- +
Ext. Price(USD):$138.57
MOQ:1
Mult:1
SPQ:1
Pancon
ECAD Model:
Protective Cover
Available Stock
75,000
Estimated Ship Time:5-12 working days
500+$0.1144
2,500+$0.104
100,000+$0.0888
150,000+$0.0874
- +
Ext. Price(USD):$57.20
MOQ:500
Mult:500
SPQ:500
Harwin
ECAD Model:
6-Pin Backshell, Gecko Series
Available Stock
221
Estimated Ship Time:9-14 working days
1+$130.3992
10+$110.8501
25+$103.9167
50+$98.9636
100+$94.2472
- +
Ext. Price(USD):$130.39
MOQ:1
Mult:1
SPQ:1
Sleeve
Available Stock
1,178
Estimated Ship Time:5-12 working days
70+$0.5373
1,000+$0.2312
2,500+$0.202
5,000+$0.1931
- +
Ext. Price(USD):$37.61
MOQ:70
Mult:1
SPQ:1
12-Pin Cap (Cover), Front AMPMODU MT Series 15.24mm L × 19.05mm H
Available Stock
273
Estimated Ship Time:6-13 working days
1+$2.7025
10+$2.3575
2,500+$1.3068
5,000+$1.1988
- +
Ext. Price(USD):$16.21
MOQ:6
Mult:1
SPQ:1
Harwin
ECAD Model:
26-Pin Backshell Datamate J-Tek, Datamate Mix-Tek
Available Stock
28
Estimated Ship Time:9-14 working days
1+$130.1724
10+$110.6525
25+$103.7314
50+$98.7865
100+$94.0785
- +
Ext. Price(USD):$130.17
MOQ:1
Mult:1
SPQ:1
DT Dust Cap, Protects Unmated Connector Interfaces, Plastic/Thermoplastic for Deutch DT Connectors
Available Stock
1,112
Estimated Ship Time:5-12 working days
50+$0.897
250+$0.7865
7,500+$0.6174
10,000+$0.6046
- +
Ext. Price(USD):$44.85
MOQ:50
Mult:1
SPQ:1
HARTING
ECAD Model:
HARTING Connector Cover, DIN Rail Mount, For PCB Connector
Available Stock
117
Estimated Ship Time:5-10 working days
1+$1.3638
10+$1.3129
100+$1.2746
- +
Ext. Price(USD):$6.81
MOQ:5
Mult:1
Harwin
ECAD Model:
10-Pin Backshell, Gecko Series
Available Stock
40
Estimated Ship Time:9-14 working days
1+$136.9332
10+$116.4002
25+$109.1189
50+$103.9172
100+$98.9647
- +
Ext. Price(USD):$136.93
MOQ:1
Mult:1
SPQ:1
36-Pin Strain Relief MR (Miniature Rectangular) Series Board Mount
Available Stock
10
Estimated Ship Time:9-14 working days
1+$16.3404
10+$13.8899
- +
Ext. Price(USD):$32.68
MOQ:2
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
10
Estimated Ship Time:7-9 working days
14+
7+$16.39
- +
Ext. Price(USD):$114.73
MOQ:7
Mult:1
SPQ:1
12-Pin Backshell 40.7mm L
Available Stock
997
Estimated Ship Time:7-9 working days
19+
35+$3.421
150+$3.289
400+$3.168
- +
Ext. Price(USD):$119.73
MOQ:35
Mult:1
SPQ:1
Molex
ECAD Model:
22-Pin Terminal Position Assurance (TPA) Micro-Fit+ 206461
Available Stock
3,000
Estimated Ship Time:7-9 working days
19+
834+$0.1397
2,100+$0.1375
3,000+$0.1298
8,000+$0.1133
20,000+$0.1111
- +
Ext. Price(USD):$116.50
MOQ:834
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Universal MATE-N-LOK II Series 23.37mm L
Available Stock
25
Estimated Ship Time:5-12 working days
25+$2.3632
- +
Ext. Price(USD):$59.08
MOQ:25
Mult:1
SPQ:10,000
Molex
ECAD Model:
Molex Connector Cover, Flat Cap for Mini-Fit Sigma Sealed Plug Housing
Available Stock
8,727
Estimated Ship Time:7-9 working days
22+
189+$0.616
500+$0.605
950+$0.594
1,750+$0.583
4,000+$0.506
- +
Ext. Price(USD):$116.42
MOQ:189
Mult:1
SPQ:1
Locking Latch
Available Stock
684
Estimated Ship Time:5-12 working days
25+$2.5312
- +
Ext. Price(USD):$63.28
MOQ:25
Mult:1
SPQ:2,000
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 4-Way
Available Stock
2,000
Estimated Ship Time:5-10 working days
50+$0.3334
100+$0.3146
250+$0.2983
500+$0.2832
- +
Ext. Price(USD):$16.67
MOQ:50
Mult:50
34-Pin Cap (Cover) AMPMODU MT Series, 43.18mm L
Available Stock
375
Estimated Ship Time:7-9 working days
13+
200+$0.583
- +
Ext. Price(USD):$116.60
MOQ:200
Mult:1
SPQ:1
26-Pin Strain Relief 812 Series
Available Stock
1,462
Estimated Ship Time:7-9 working days
14+
228+$0.484
1,137+$0.462
- +
Ext. Price(USD):$110.35
MOQ:228
Mult:1
SPQ:1
ASSMANN WSW IDC Tool, Pull and Insert Tool
Available Stock
150
Estimated Ship Time:5-10 working days
50+$0.0829
- +
Ext. Price(USD):$6.63
MOQ:80
Mult:10
Wire Seal Tru-Loc® Connectors, Adhesive Mount, Wire Mount
Available Stock
4,447
Estimated Ship Time:9-14 working days
25+$0.7245
50+$0.6897
1,000+$0.5581
2,500+$0.5232
- +
Ext. Price(USD):$26.08
MOQ:36
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
1,200
Estimated Ship Time:5-12 working days
250+$0.0737
2,500+$0.0631
100,000+$0.0446
150,000+$0.0443
- +
Ext. Price(USD):$30.06
MOQ:408
Mult:1
SPQ:1
multicomp
ECAD Model:
COVER, P-BOX, FOR 30X20X15MM; Cover Type:Potting Box Cover; Cover Material:ABS; Cover Colour:Black; For Use With:Potting Boxes; External Depth - Metric:30mm; External Width - Metric:20mm; External Height - Metric:1.5mm;
Available Stock
363
Estimated Ship Time:6-12 working days
50+$0.1765
- +
Ext. Price(USD):$25.06
MOQ:142
Mult:1
25 / PageGoto