Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
ITT Cannon
ECAD Model:
36-Pin Shroud Trident Rectangular Receptacle
Available Stock
90
Estimated Ship Time:6-13 working days
1+$13.11
10+$11.0808
500+$7.4736
1,000+$7.1388
- +
Ext. Price(USD):$26.22
MOQ:2
Mult:1
SPQ:1
Amphenol
ECAD Model:
40-Pin Strain Relief Quickie Series 66.18mm L
Available Stock
720
Estimated Ship Time:9-14 working days
250+$0.3348
- +
Ext. Price(USD):$83.70
MOQ:250
Mult:250
SPQ:1
Molex
ECAD Model:
24-Pin Strain Relief Milli-Grid, Wire Mount, 8mm H
Available Stock
14,583
Estimated Ship Time:7-9 working days
14+
1,137+$0.1023
2,900+$0.1001
5,700+$0.099
10,000+$0.0946
- +
Ext. Price(USD):$116.31
MOQ:1,137
Mult:1
SPQ:1
4-Pin Terminal Position Assurance (TPA), SGI Series
Available Stock
9,957
Estimated Ship Time:6-13 working days
100+$0.0897
250+$0.084
500+$0.0748
1,000+$0.0682
2,000+$0.0616
- +
Ext. Price(USD):$14.08
MOQ:157
Mult:1
SPQ:1
20-Pin Module, Bracket Mount, 24.81mm L × 27.55mm H
Available Stock
117
Estimated Ship Time:5-12 working days
1+$104.5296
5+$101.64
89+$68.3195
118+$67.3351
- +
Ext. Price(USD):$104.52
MOQ:1
Mult:1
SPQ:1
Harwin
ECAD Model:
16-Pin Backshell, Datamate J-Tek
Available Stock
10
Estimated Ship Time:9-14 working days
1+$80.568
10+$68.4796
25+$64.1948
50+$61.1338
100+$58.2198
- +
Ext. Price(USD):$80.56
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Header 14-Pin Shroud C-Grid SL Series Wire Mount 35.15mm L
Available Stock
1,870
Estimated Ship Time:9-14 working days
10+$2.1114
25+$1.9786
600+$1.5809
1,050+$1.5197
- +
Ext. Price(USD):$27.44
MOQ:13
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Retention Key Mini-Fit Sr Series, 24.32mm H
Available Stock
127
Estimated Ship Time:5-12 working days
100+$0.7493
500+$0.7293
1,000+$0.6206
2,000+$0.611
4,000+$0.5896
- +
Ext. Price(USD):$74.93
MOQ:100
Mult:100
SPQ:1
Sumicon 1600 Series Connector Bracket, 16-Pin, Bracket Mount
Available Stock
159
Estimated Ship Time:6-13 working days
1+$3.4155
10+$3.003
1,000+$1.9332
2,500+$1.836
- +
Ext. Price(USD):$17.07
MOQ:5
Mult:1
SPQ:1
CONN PIN HEADER PCB R/A
Available Stock
35
Estimated Ship Time:9-14 working days
1+$3.294
10+$2.8004
1,035+$2.0183
2,520+$1.8956
- +
Ext. Price(USD):$26.35
MOQ:8
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
24-Pin Hood and Strain Relief Trident Rectangular Plugs 51mm L
Available Stock
109
Estimated Ship Time:6-13 working days
1+$5.9455
250+$4.8168
500+$4.4496
1,000+$4.1364
2,500+$3.24
- +
Ext. Price(USD):$17.83
MOQ:3
Mult:1
SPQ:1
1-Pin Plug, Sealing MCON Series
Available Stock
23,247
Estimated Ship Time:6-13 working days
25+$0.1461
100+$0.1392
250+$0.1177
1,000+$0.099
2,500+$0.0918
- +
Ext. Price(USD):$14.05
MOQ:101
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Terminal Positioning Assembly (TPA)
Available Stock
24,787
Estimated Ship Time:9-14 working days
100+$0.1553
250+$0.1456
500+$0.1386
1,000+$0.132
2,500+$0.1237
- +
Ext. Price(USD):$26.09
MOQ:168
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Wedgelock ML-XT 93445 Housing Edge Mount
Available Stock
15,925
Estimated Ship Time:7-9 working days
18+
715+$0.0814
8,000+$0.0781
- +
Ext. Price(USD):$58.20
MOQ:715
Mult:1
SPQ:1
2-Pin Lock Plate Power Double Lock Series Board Mount
Available Stock
17,901
Estimated Ship Time:7-9 working days
17+
3,000+$0.044
13,000+$0.0429
- +
Ext. Price(USD):$132.00
MOQ:3,000
Mult:1,000
SPQ:1,000
Hardware Kit, Mini-Box Series, 5.84mm × 4.2418mm × 4.2418mm
Available Stock
171
Estimated Ship Time:5-12 working days
75+$23.7968
113+$22.8017
150+$22.5984
- +
Ext. Price(USD):$1,784.76
MOQ:75
Mult:1
SPQ:1
TE Connectivity Housing, Cover for Module IV
Available Stock
5,909
Estimated Ship Time:6-13 working days
10+$0.6279
25+$0.5578
5,000+$0.3326
10,000+$0.3294
- +
Ext. Price(USD):$14.50
MOQ:26
Mult:1
SPQ:1
3pin Cap Cover, Strain Relief, 9176 Series, PCB Mount, 12mm × 6.3mm × 5.55mm
Available Stock
728
Estimated Ship Time:9-14 working days
1+$1.1421
10+$0.9675
1,000+$0.5852
3,000+$0.5416
- +
Ext. Price(USD):$150.11
MOQ:218
Mult:1
SPQ:1
6-Pin Dust Cap (Cover), MTA-156 Series
Available Stock
2,096
Estimated Ship Time:6-13 working days
25+$0.2668
100+$0.2542
3,000+$0.1868
10,000+$0.1793
- +
Ext. Price(USD):$14.14
MOQ:53
Mult:1
SPQ:1
Molex
ECAD Model:
TPA Retainer, 6POS, Grey, Polyester
Available Stock
94,000
Estimated Ship Time:7-9 working days
22+
2,632+$0.044
7,000+$0.0429
27,000+$0.0418
48,000+$0.0407
- +
Ext. Price(USD):$115.80
MOQ:2,632
Mult:1
SPQ:1
Bushing, LX Series, 16-Pin, Wire Mount, Bushing Mount
Available Stock
95
Estimated Ship Time:9-14 working days
25+$0.6497
50+$0.6188
1,000+$0.5008
2,500+$0.4694
- +
Ext. Price(USD):$26.63
MOQ:41
Mult:1
SPQ:1
Amphenol
ECAD Model:
6-Pin Shroud Wire Mount 11.3mm L
Available Stock
7,076
Estimated Ship Time:6-13 working days
10+$0.705
25+$0.6302
5,000+$0.4342
10,000+$0.4082
- +
Ext. Price(USD):$14.10
MOQ:20
Mult:1
SPQ:1
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Available Stock
240
Estimated Ship Time:5-12 working days
10+$2.3
100+$1.969
5,000+$1.7548
7,500+$1.7441
- +
Ext. Price(USD):$32.20
MOQ:14
Mult:1
SPQ:500
2-Pin TPA Val-U-Lok Housing 13.6mm × 5.4102mm × 5.41mm
Available Stock
28,143
Estimated Ship Time:6-13 working days
100+$0.1265
250+$0.0932
5,000+$0.0702
9,000+$0.067
- +
Ext. Price(USD):$14.04
MOQ:111
Mult:1
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock Wedge Lock, WLP12 Series, 8-Pos
Available Stock
863
Estimated Ship Time:5-10 working days
25+$0.3707
100+$0.3625
250+$0.3559
500+$0.3472
- +
Ext. Price(USD):$9.26
MOQ:25
Mult:25
25 / PageGoto