Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
40-Pin Strain Relief Minitek™
Available Stock
161
Estimated Ship Time:5-12 working days
25+$2.139
1,000+$1.9795
- +
Ext. Price(USD):$53.47
MOQ:25
Mult:1
SPQ:182
EMI Backshell DMC-MD Inserts
Available Stock
2
Estimated Ship Time:7-9 working days
15+
1+$147.224
2+$144.507
- +
Ext. Price(USD):$147.22
MOQ:1
Mult:1
SPQ:1
Connector Accessories Shield Finger Straight T/R
Available Stock
4,340
Estimated Ship Time:5-10 working days
10+$0.376
100+$0.3442
250+$0.3289
500+$0.3072
1,000+$0.3008
- +
Ext. Price(USD):$7.52
MOQ:20
Mult:10
Polarizing Device (Key, Plug, Post) Box Series, 7.75mm L × 4.42mm H
Available Stock
4,466
Estimated Ship Time:7-9 working days
22+
8+$14.245
20+$13.992
39+$13.75
78+$13.508
1,000+$12.276
- +
Ext. Price(USD):$113.96
MOQ:8
Mult:1
SPQ:1
Retention Clip, AMPMODU Mod II & IV Series, Fixed Mount
Available Stock
3,299
Estimated Ship Time:7-9 working days
15+
300+$0.429
650+$0.418
2,600+$0.407
- +
Ext. Price(USD):$128.70
MOQ:300
Mult:1
SPQ:1
Molex
ECAD Model:
13-Pin Terminal Position Assurance (TPA) 51163 Series, 34.3mm L × 7.87mm H
Available Stock
4,098
Estimated Ship Time:7-9 working days
18+
530+$0.22
1,400+$0.2156
2,700+$0.2123
- +
Ext. Price(USD):$116.60
MOQ:530
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Metrimate Series 4.19mm L
Available Stock
461
Estimated Ship Time:5-12 working days
10+$1.978
100+$1.694
6,000+$1.4445
8,000+$1.4338
- +
Ext. Price(USD):$31.64
MOQ:16
Mult:1
SPQ:2,000
Molex
ECAD Model:
Molex PCB Connector Housing, 6-Pos, 4.2mm Pitch, 1 Row
Available Stock
7,500
Estimated Ship Time:7-9 working days
24+
870+$0.1342
2,200+$0.132
4,400+$0.1298
7,500+$0.1232
- +
Ext. Price(USD):$116.75
MOQ:870
Mult:1
SPQ:1
Mounting Base DMC-M Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
2+$676.8414
10+$663.3058
50+$650.0393
100+$637.0383
500+$624.2976
- +
Ext. Price(USD):$1,353.68
MOQ:2
Mult:2
SPQ:1
Molex
ECAD Model:
8-Pin Terminal Position Assurance (TPA) Ultra-Fit Series
Available Stock
1,750
Estimated Ship Time:7-10 working days
25+
1,370+$0.0924
1,800+$0.0902
20,000+$0.0726
40,000+$0.0671
- +
Ext. Price(USD):$126.58
MOQ:1,370
Mult:1
SPQ:1
5-Pin Cable Seal
Available Stock
1,150
Estimated Ship Time:7-10 working days
23+
29+$3.795
600+$3.795
1,200+$3.344
2,000+$3.179
- +
Ext. Price(USD):$110.05
MOQ:29
Mult:1
SPQ:1
HARTING
ECAD Model:
Cap (Cover), Dust Han® PushPull Housings
Available Stock
4
Estimated Ship Time:9-14 working days
1+$11.5776
10+$9.8388
500+$7.4657
1,000+$7.1097
- +
Ext. Price(USD):$34.73
MOQ:3
Mult:1
SPQ:1
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Available Stock
4,100
Estimated Ship Time:6-13 working days
1+$4.9105
10+$4.18
1,000+$3.4236
2,500+$2.9484
- +
Ext. Price(USD):$14.73
MOQ:3
Mult:1
SPQ:1
Coding Key DMC-MD Inserts
Available Stock
3,423
Estimated Ship Time:7-10 working days
20+
5+$22.836
13+$19.943
200+$16.621
500+$15.499
- +
Ext. Price(USD):$114.18
MOQ:5
Mult:1
SPQ:1
3M
ECAD Model:
Hardware Kit, 3000 Series
Available Stock
545
Estimated Ship Time:9-14 working days
10+$1.8317
25+$1.7163
1,000+$1.3228
2,500+$1.24
- +
Ext. Price(USD):$27.47
MOQ:15
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Connector Mounting Bracket
Available Stock
6,600
Estimated Ship Time:7-9 working days
19+
1,600+$0.1177
3,200+$0.1155
6,400+$0.1133
- +
Ext. Price(USD):$188.32
MOQ:1,600
Mult:1
SPQ:1
Ejector Latch, AMP-LATCH Series
Available Stock
716
Estimated Ship Time:6-13 working days
1+$1.495
10+$1.3225
2,000+$0.7571
5,000+$0.7355
- +
Ext. Price(USD):$14.54
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Shroud C-Grid SL Series, Clip Mount, Free Hanging
Available Stock
2,000
Estimated Ship Time:7-9 working days
22+
150+$0.781
400+$0.77
750+$0.759
1,500+$0.748
- +
Ext. Price(USD):$117.15
MOQ:150
Mult:1
SPQ:1
Molex
ECAD Model:
18-Pin Shroud C-Grid SL Series, Clip Mount
Available Stock
109
Estimated Ship Time:9-14 working days
10+$2.1049
25+$1.9729
1,200+$1.5012
2,800+$1.4141
- +
Ext. Price(USD):$27.36
MOQ:13
Mult:1
SPQ:1
NOVO AMP Latch, Ribbon Cable Connector Component, Glass Filled Nylon, 10-64 Pin Options
Available Stock
51,000
Estimated Ship Time:7-10 working days
22+
750+$0.165
2,000+$0.1617
3,500+$0.1595
7,000+$0.1562
- +
Ext. Price(USD):$123.75
MOQ:750
Mult:250
SPQ:250
3-Pin Plug, Sealing Power Versa-Lock Series 5.68mm (L)
Available Stock
11,478
Estimated Ship Time:6-13 working days
25+$0.2703
100+$0.2565
5,000+$0.176
8,000+$0.1696
- +
Ext. Price(USD):$14.05
MOQ:52
Mult:1
SPQ:1
Harwin
ECAD Model:
50-Pin Backshell, Gecko Series, Free Hanging
Available Stock
4
Estimated Ship Time:9-14 working days
1+$150.4548
10+$127.899
25+$119.899
50+$114.1841
100+$108.743
- +
Ext. Price(USD):$150.45
MOQ:1
Mult:1
SPQ:1
Boot
Available Stock
3,325
Estimated Ship Time:6-13 working days
1+$1.5065
10+$1.334
2,500+$0.8791
5,000+$0.864
- +
Ext. Price(USD):$14.67
MOQ:11
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
7,645
Estimated Ship Time:6-13 working days
10+$1.081
25+$0.9649
2,500+$0.6512
5,000+$0.6221
- +
Ext. Price(USD):$14.05
MOQ:13
Mult:1
SPQ:1
20-Pin Retainer, SL-156 Series, Panel Mount
Available Stock
2,553
Estimated Ship Time:6-13 working days
10+$0.9304
25+$0.851
5,000+$0.4774
9,600+$0.4633
- +
Ext. Price(USD):$14.88
MOQ:16
Mult:1
SPQ:1
25 / PageGoto