Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
502
Estimated Ship Time:5-12 working days
1+$81.5696
10+$62.9053
150+$58.5397
200+$57.9619
- +
Ext. Price(USD):$81.56
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
40-Pin Strain Relief, 3000 Series, Panel Mount, 53.8mm × 6.1mm H
Available Stock
100
Estimated Ship Time:9-14 working days
1+$3.0348
10+$2.578
1,000+$1.8623
2,500+$1.7458
- +
Ext. Price(USD):$28.35
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
46-Pin Shroud C-Grid SL Series, Bracket Mount, 62.63mm × 19.05mm
Available Stock
50
Estimated Ship Time:9-14 working days
50+$12.6721
100+$12.4186
500+$12.1703
1,000+$11.9269
5,000+$11.6883
- +
Ext. Price(USD):$633.60
MOQ:50
Mult:50
SPQ:1
Rear Housing MTC Series
Available Stock
4
Estimated Ship Time:7-9 working days
17+
1+$177.474
2+$174.416
4+$171.358
- +
Ext. Price(USD):$177.47
MOQ:1
Mult:1
SPQ:1
Mounting Frame 120-Pin CR ZIF Series 100.33mm × 34.036mm × 34.03mm
Available Stock
322
Estimated Ship Time:5-12 working days
125+$453.2092
250+$231.4731
375+$157.5682
500+$154.4117
- +
Ext. Price(USD):$56,651.15
MOQ:125
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Wedgelock ML-XT 93444 Housings, Edge Mount
Available Stock
12,028
Estimated Ship Time:7-9 working days
20+
486+$0.1507
2,428+$0.143
9,709+$0.1364
- +
Ext. Price(USD):$73.24
MOQ:486
Mult:1
SPQ:1
Polarization Device (Key, Plug, Terminal), Mini-Box Series
Available Stock
29
Estimated Ship Time:9-14 working days
25+$51.3337
50+$50.307
100+$49.3008
250+$48.3148
500+$47.3485
- +
Ext. Price(USD):$1,283.34
MOQ:25
Mult:25
SPQ:1
Molex
ECAD Model:
2-Pin Backshell Mega-Fit Receptacles, Free Hanging
Available Stock
11,307
Estimated Ship Time:7-9 working days
17+
239+$0.495
600+$0.473
1,200+$0.462
2,400+$0.451
8,000+$0.396
- +
Ext. Price(USD):$118.30
MOQ:239
Mult:1
SPQ:1
Amphenol
ECAD Model:
Insulator ePower Series
Available Stock
108
Estimated Ship Time:9-14 working days
1+$8.2512
10+$7.0146
500+$5.3227
1,000+$5.0688
- +
Ext. Price(USD):$33.00
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
16-Pin Backshell, MX150 Series
Available Stock
6,625
Estimated Ship Time:9-14 working days
10+$2.038
25+$1.9099
1,000+$1.4721
2,500+$1.38
- +
Ext. Price(USD):$26.49
MOQ:13
Mult:1
SPQ:1
JAE
ECAD Model:
JAE MX44 Series Automotive Connector Bracket, Front Cover
Available Stock
630
Estimated Ship Time:5-10 working days
5+$1.1446
- +
Ext. Price(USD):$11.44
MOQ:10
Mult:5
1-Pin Cap (Cover), 9177-600 Series Contacts
Available Stock
1,600
Estimated Ship Time:9-14 working days
1+$0.739
10+$0.6231
1,600+$0.3646
3,200+$0.3472
- +
Ext. Price(USD):$150.48
MOQ:362
Mult:1
SPQ:1
4-Pin Gasket AT Series™
Available Stock
996
Estimated Ship Time:6-13 working days
10+$0.8211
25+$0.7498
5,000+$0.4828
10,000+$0.4752
- +
Ext. Price(USD):$14.77
MOQ:18
Mult:1
SPQ:1
5-Pin Strain Relief, Universal MATE-N-LOK II Series
Available Stock
4,043
Estimated Ship Time:6-13 working days
1+$2.4495
10+$2.1965
1,500+$1.728
4,500+$1.3284
- +
Ext. Price(USD):$14.69
MOQ:6
Mult:1
SPQ:1
Rectangular Connector SKT 20 POS Crimp ST Cable Mount
Available Stock
5
Estimated Ship Time:7-9 working days
18+
1+$512.446
2+$503.459
3+$494.472
- +
Ext. Price(USD):$512.44
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
7-Pin Terminal Position Assurance (TPA) L1NK 250 Series, Fixed Mount, 19.89mm L × 7.21mm H
Available Stock
25,146
Estimated Ship Time:7-9 working days
21+
1,563+$0.0748
4,000+$0.0737
7,900+$0.0726
9,000+$0.0693
- +
Ext. Price(USD):$116.91
MOQ:1,563
Mult:1
SPQ:1
50-Pin Backshell HIF3 Series, 68.04mm L × 38mm H
Available Stock
32
Estimated Ship Time:9-14 working days
1+$14.0184
10+$11.9156
500+$9.0416
1,000+$8.6106
- +
Ext. Price(USD):$28.03
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories, Fit Straight, Nylon, Natural Bag
Available Stock
4,473
Estimated Ship Time:9-14 working days
100+$0.1423
250+$0.1334
500+$0.1271
1,000+$0.121
2,500+$0.1134
- +
Ext. Price(USD):$26.04
MOQ:183
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
12-Pin Wedgelock IT Series Connector
Available Stock
4,730
Estimated Ship Time:9-14 working days
50+$0.3357
100+$0.3196
1,000+$0.2715
2,500+$0.2545
- +
Ext. Price(USD):$26.18
MOQ:78
Mult:1
SPQ:1
TE Connectivity Stress Relief, 480594 Series, For AMP Micro Rectangular II Connector
Available Stock
1,078
Estimated Ship Time:7-9 working days
23+
25+$5.357
55+$5.258
150+$5.17
250+$5.082
800+$4.62
- +
Ext. Price(USD):$133.92
MOQ:25
Mult:1
SPQ:1
Wire Seal MCP Series Wire Mount
Available Stock
1,954
Estimated Ship Time:7-10 working days
22+
99+$1.122
1,500+$1.122
3,000+$0.99
8,000+$0.946
16,000+$0.891
- +
Ext. Price(USD):$111.07
MOQ:99
Mult:1
SPQ:1
HARTING
ECAD Model:
Cap (Cover), Sealing Han® PushPull Housings, Adhesive Mount
Available Stock
59
Estimated Ship Time:9-14 working days
1+$4.6548
10+$3.956
1,000+$2.8577
2,500+$2.679
- +
Ext. Price(USD):$27.92
MOQ:6
Mult:1
SPQ:1
7-Pin Lock Plate MIC Series, Board Mount
Available Stock
8,400
Estimated Ship Time:7-9 working days
21+
500+$0.2629
1,500+$0.2574
2,500+$0.253
4,000+$0.2431
- +
Ext. Price(USD):$131.45
MOQ:500
Mult:1
SPQ:1
Cap Cover, 32.6mm(L)×26.3mm(H)
Available Stock
8,044
Estimated Ship Time:6-13 working days
1+$1.771
10+$1.587
2,500+$1.1016
5,000+$1.0314
- +
Ext. Price(USD):$14.16
MOQ:8
Mult:1
SPQ:1
3M
ECAD Model:
50-Pin Strain Relief D89 Series
Available Stock
263
Estimated Ship Time:6-13 working days
10+$0.6095
25+$0.5474
5,000+$0.3532
10,000+$0.3445
- +
Ext. Price(USD):$14.23
MOQ:26
Mult:1
SPQ:1
25 / PageGoto