Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
Plug, Sealing, Adhesive Mount
Available Stock
286
Estimated Ship Time:9-14 working days
50+$0.4787
100+$0.4558
250+$0.4272
- +
Ext. Price(USD):$26.32
MOQ:55
Mult:1
SPQ:1
Molex
ECAD Model:
18-Pin TPA Micro-Fit+ 206461
Available Stock
5,498
Estimated Ship Time:6-13 working days
25+$0.2806
100+$0.2668
4,000+$0.1868
12,000+$0.1825
- +
Ext. Price(USD):$14.03
MOQ:50
Mult:1
SPQ:1
Amphenol
ECAD Model:
Polarizing Device (Key, Plug, Post), Quickie™ Series
Available Stock
82,322
Estimated Ship Time:9-14 working days
50+$0.4463
100+$0.4249
1,000+$0.361
2,500+$0.3384
- +
Ext. Price(USD):$26.33
MOQ:59
Mult:1
SPQ:1
Molex
ECAD Model:
30-Pin Clip, Mini Mi II, 54596 Series, Bracket Mount
Available Stock
17,438
Estimated Ship Time:7-9 working days
21+
1,400+$0.0638
7,000+$0.0605
- +
Ext. Price(USD):$89.32
MOQ:1,400
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve Plug, Plastic, For 1-Wire Cable
Available Stock
1,515
Estimated Ship Time:5-10 working days
5+$1.5423
50+$1.5092
125+$1.4684
- +
Ext. Price(USD):$7.71
MOQ:5
Mult:5
Amphenol
ECAD Model:
2-Pin Boot AT Series, Panel Mount, 61.6mm × 15.4mm × 19.7mm
Available Stock
78
Estimated Ship Time:6-13 working days
1+$1.7595
10+$1.5065
2,700+$0.8143
5,100+$0.8014
- +
Ext. Price(USD):$14.07
MOQ:8
Mult:1
SPQ:1
TE DMC-MD Rectangular Connector Plugs, Compact, Lightweight, Single-Module Configuration
Available Stock
85
Estimated Ship Time:6-13 working days
1+$51.931
10+$48.5352
25+$47.736
50+$46.9476
100+$44.6472
- +
Ext. Price(USD):$51.93
MOQ:1
Mult:1
SPQ:1
Connector, Type: Accessories
Available Stock
171
Estimated Ship Time:7-9 working days
20+
50+$2.354
150+$2.31
- +
Ext. Price(USD):$117.70
MOQ:50
Mult:1
SPQ:1
40-Pin Backshell, MTC Series
Available Stock
29
Estimated Ship Time:9-14 working days
1+$8,421.5592
10+$8,253.1224
100+$8,088.0603
500+$7,926.2991
1,000+$7,767.7731
- +
Ext. Price(USD):$8,421.55
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Boot, 3pin, AT Series™
Available Stock
169
Estimated Ship Time:7-9 working days
19+
79+$0.869
150+$0.737
300+$0.627
1,000+$0.561
- +
Ext. Price(USD):$68.65
MOQ:79
Mult:1
SPQ:1
HARTING
ECAD Model:
HARTING Connector Screw
Available Stock
12,800
Estimated Ship Time:5-10 working days
50+$0.0642
1,250+$0.0622
3,750+$0.0604
10,000+$0.0589
20,000+$0.0561
- +
Ext. Price(USD):$9.63
MOQ:150
Mult:50
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
100
Estimated Ship Time:5-10 working days
1+$1.2874
10+$1.2746
100+$1.2364
- +
Ext. Price(USD):$7.72
MOQ:6
Mult:1
9pin Shroud AMPMODU MTE Series, Panel Mount, 41.17mm L
Available Stock
4,573
Estimated Ship Time:7-9 working days
14+
60+$1.837
150+$1.815
300+$1.782
600+$1.749
3,600+$1.584
- +
Ext. Price(USD):$110.22
MOQ:60
Mult:1
SPQ:1
Wedge Lock, Edge Mount
Available Stock
1,448
Estimated Ship Time:5-12 working days
100+$0.454
500+$0.3979
10,000+$0.3212
15,000+$0.3122
- +
Ext. Price(USD):$45.40
MOQ:100
Mult:1
SPQ:1
Amphenol
ECAD Model:
8-Pin Boot AT Series™
Available Stock
224
Estimated Ship Time:6-13 working days
1+$1.5985
10+$1.3685
2,500+$0.7571
5,000+$0.7441
- +
Ext. Price(USD):$15.05
MOQ:11
Mult:1
SPQ:1
Hirose Locating Bushing, Bushing
Available Stock
407
Estimated Ship Time:6-12 working days
10+$0.6
100+$0.5936
1,000+$0.5705
2,500+$0.5551
- +
Ext. Price(USD):$30.00
MOQ:50
Mult:10
TE Connectivity Stress Relief, 641775 Series, For General Purpose MATE-N-LOK Connectors
Available Stock
1,550
Estimated Ship Time:7-10 working days
26+
80+$1.386
250+$1.221
2,000+$1.133
100,000+$0.935
- +
Ext. Price(USD):$110.88
MOQ:80
Mult:1
SPQ:1
TE Connectivity MATE-N-LOK Strain Relief, 6 & 8 Circuit Plug Housing
Available Stock
3,916
Estimated Ship Time:6-13 working days
1+$2.622
10+$2.4265
2,500+$1.512
5,000+$1.4148
- +
Ext. Price(USD):$15.73
MOQ:6
Mult:1
SPQ:1
TE Connectivity Automotive Connector Seal, Micro Timer Series, Interface Seal
Available Stock
1,097
Estimated Ship Time:6-13 working days
1+$2.806
10+$2.392
2,500+$1.5012
5,000+$1.4364
- +
Ext. Price(USD):$14.03
MOQ:5
Mult:1
SPQ:1
18-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
4,375
Estimated Ship Time:7-9 working days
13+
500+$0.2717
1,000+$0.2508
- +
Ext. Price(USD):$135.85
MOQ:500
Mult:125
SPQ:125
Locking Slide AMPMODU Mod IV Series
Available Stock
22,828
Estimated Ship Time:7-10 working days
23+
250+$0.473
1,200+$0.462
2,400+$0.451
- +
Ext. Price(USD):$118.25
MOQ:250
Mult:1
SPQ:1
42-Pin Retainer 7.2mm H
Available Stock
2,326
Estimated Ship Time:9-14 working days
10+$1.3442
25+$1.0463
1,000+$0.8064
2,500+$0.7559
- +
Ext. Price(USD):$26.88
MOQ:20
Mult:1
SPQ:1
Strain Relief, AMPMODU Mod IV Series
Available Stock
25
Estimated Ship Time:9-14 working days
1+$112.1256
100+$109.89
500+$107.6868
1,000+$105.5376
5,000+$103.4208
- +
Ext. Price(USD):$112.12
MOQ:1
Mult:1
SPQ:1
50-Pin Pull Tab, AMP-LATCH Series
Available Stock
2,245
Estimated Ship Time:7-9 working days
16+
200+$0.572
500+$0.561
2,000+$0.55
- +
Ext. Price(USD):$114.40
MOQ:200
Mult:1
SPQ:1
Harwin
ECAD Model:
Shell, Gecko Series, 34-Pin, Panel Mount
Available Stock
5
Estimated Ship Time:7-9 working days
10+
3+$49.401
- +
Ext. Price(USD):$148.20
MOQ:3
Mult:1
SPQ:1
25 / PageGoto