Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
16-Pin Backshell, MX150 Series
Available Stock
3,175
Estimated Ship Time:9-14 working days
10+$2.3792
25+$2.2304
1,120+$1.7053
2,520+$1.6105
- +
Ext. Price(USD):$26.17
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Wedgelock ML-XT 93444 Housings Edge Mount 18.25mm × 20.65mm
Available Stock
7,400
Estimated Ship Time:7-9 working days
21+
345+$0.1694
3,000+$0.1617
8,000+$0.1562
- +
Ext. Price(USD):$58.44
MOQ:345
Mult:1
SPQ:1
Spring Latch, Spring Mount
Available Stock
18
Estimated Ship Time:7-9 working days
20+
2+$57.398
5+$56.408
10+$55.418
- +
Ext. Price(USD):$114.79
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin TPA Ultra-Fit Series
Available Stock
11,820
Estimated Ship Time:7-9 working days
21+
2,000+$0.0528
4,000+$0.0517
5,000+$0.0462
10,000+$0.044
- +
Ext. Price(USD):$105.60
MOQ:2,000
Mult:1
SPQ:1
ASSMANN WSW IDC Tool, Pull and Insert Tool
Available Stock
10,636
Estimated Ship Time:5-12 working days
540+$0.0426
5,040+$0.0393
150,000+$0.0337
250,020+$0.0334
- +
Ext. Price(USD):$30.67
MOQ:720
Mult:60
SPQ:60
U-Clip for LEAVYSEAL Connectors, Fits 15/21/22/26/39/62 Pos
Available Stock
446
Estimated Ship Time:6-13 working days
1+$2.1505
10+$1.8515
3,000+$1.1232
5,250+$1.0908
- +
Ext. Price(USD):$15.05
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessory, Terminal Position Assurance Retainer, Right Angle, Bag
Available Stock
40,900
Estimated Ship Time:7-9 working days
20+
550+$0.1155
2,600+$0.1144
5,100+$0.1122
10,200+$0.11
28,000+$0.1078
- +
Ext. Price(USD):$63.52
MOQ:550
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
961
Estimated Ship Time:6-13 working days
25+$0.2588
100+$0.2461
5,000+$0.1674
10,000+$0.1652
- +
Ext. Price(USD):$14.23
MOQ:55
Mult:1
SPQ:1
Commoning Bar 4-Pin MR (Miniature Rectangular) Series
Available Stock
1,208
Estimated Ship Time:5-12 working days
850+$0.0941
4,100+$0.0912
25,000+$0.0713
50,000+$0.0666
- +
Ext. Price(USD):$79.98
MOQ:850
Mult:1
SPQ:1
Molex
ECAD Model:
34-Pin Shroud, C-Grid SL Series, Wire Mount, 27.56mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$12.2025
100+$11.9585
500+$11.7193
1,000+$11.4849
5,000+$11.2552
- +
Ext. Price(USD):$610.12
MOQ:50
Mult:50
SPQ:1
Amphenol
ECAD Model:
8-Pin Boot AT Series™
Available Stock
326
Estimated Ship Time:6-13 working days
10+$1.219
25+$1.111
2,500+$0.7992
5,000+$0.7916
- +
Ext. Price(USD):$14.62
MOQ:12
Mult:1
SPQ:1
32-Pin Backshell, SRK Series
Available Stock
234
Estimated Ship Time:6-13 working days
1+$9.2575
10+$8.063
500+$6.0264
1,000+$5.7888
- +
Ext. Price(USD):$18.51
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Cable Holder, Ribbon Cables, Wire Mount, 3.8mm H
Available Stock
19,980
Estimated Ship Time:7-9 working days
16+
4,000+$0.0177
18,000+$0.0163
- +
Ext. Price(USD):$70.80
MOQ:4,000
Mult:1
SPQ:1
Coding Key DMC-MD Inserts
Available Stock
75
Estimated Ship Time:9-14 working days
5+$33.048
10+$31.3956
1,000+$25.5725
10,000+$24.2936
- +
Ext. Price(USD):$165.24
MOQ:5
Mult:5
SPQ:1
EDAC
ECAD Model:
EDAC 570 Series 570-260-002 Wire Seal, For Waterproof Connector
Available Stock
1,100
Estimated Ship Time:5-10 working days
10+$0.1886
500+$0.1835
2,500+$0.1772
- +
Ext. Price(USD):$7.54
MOQ:40
Mult:10
Mounting Base DMC-MD Inserts, Wire Mount
Available Stock
75
Estimated Ship Time:9-14 working days
1+$50.0256
10+$42.5153
100+$36.1434
250+$33.8838
- +
Ext. Price(USD):$50.02
MOQ:1
Mult:1
SPQ:1
Coding Pin, Threaded Mount
Available Stock
272
Estimated Ship Time:6-13 working days
1+$1.035
10+$0.8844
2,500+$0.5335
5,000+$0.5249
- +
Ext. Price(USD):$14.15
MOQ:16
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
96
Estimated Ship Time:5-10 working days
1+$1.6315
10+$1.555
100+$1.5168
- +
Ext. Price(USD):$6.52
MOQ:4
Mult:1
26-Pin TPA Economy Power Housing, 11.43mm H
Available Stock
11,271
Estimated Ship Time:7-9 working days
14+
3,800+$0.0682
7,600+$0.0605
- +
Ext. Price(USD):$259.16
MOQ:3,800
Mult:1
SPQ:1
5-Pin Cap (Cover), Dust, MTA-156 Series
Available Stock
195
Estimated Ship Time:6-13 working days
25+$0.2496
100+$0.2369
5,000+$0.1588
10,000+$0.1501
- +
Ext. Price(USD):$14.22
MOQ:57
Mult:1
SPQ:1
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
2,677
Estimated Ship Time:7-9 working days
22+
20+$6.732
45+$6.622
500+$5.808
2,000+$4.752
- +
Ext. Price(USD):$134.64
MOQ:20
Mult:1
SPQ:1
Capacitor (Cover), Protective, ATM Series, 8-Pin
Available Stock
150
Estimated Ship Time:7-9 working days
10+
80+$1.419
150+$1.309
200+$1.232
- +
Ext. Price(USD):$113.52
MOQ:80
Mult:1
SPQ:1
5-Pin PCB Frame, DuoPlug Mark II, PCB Connector, TH
Available Stock
165
Estimated Ship Time:6-13 working days
10+$0.7832
25+$0.7165
4,000+$0.4093
12,000+$0.3888
- +
Ext. Price(USD):$14.09
MOQ:18
Mult:1
SPQ:1
Seal Protector, Micro Quadlok Series, Adhesive Mount
Available Stock
650
Estimated Ship Time:5-12 working days
50+$0.5566
250+$0.484
12,000+$0.428
27,000+$0.4259
- +
Ext. Price(USD):$30.05
MOQ:54
Mult:1
SPQ:3,000
Harwin
ECAD Model:
Datamate J-Tek/Datamate Mix-Tek 14-Pin Backshell
Available Stock
55
Estimated Ship Time:9-14 working days
1+$132.9264
10+$112.9907
25+$105.9225
50+$100.8731
100+$96.0656
- +
Ext. Price(USD):$132.92
MOQ:1
Mult:1
SPQ:1
25 / PageGoto