Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
Strain Relief Quickie™ Series 64-Pin
Available Stock
648
Estimated Ship Time:5-12 working days
50+$0.3071
100+$0.3013
1,000+$0.2706
2,500+$0.2579
- +
Ext. Price(USD):$30.09
MOQ:98
Mult:1
SPQ:1
12-Pin Cap (Cover), Protective, ATM Series
Available Stock
375
Estimated Ship Time:5-10 working days
1+$3.7856
10+$3.4925
25+$3.1356
- +
Ext. Price(USD):$7.57
MOQ:2
Mult:1
JAE
ECAD Model:
Polarizing Device (Key, Plug, Post), MX60A Series
Available Stock
3,398
Estimated Ship Time:9-14 working days
100+$0.1104
250+$0.1034
500+$0.0985
1,000+$0.0938
2,500+$0.0879
- +
Ext. Price(USD):$26.05
MOQ:252
Mult:1
SPQ:1
29-Pin Plug, Sealing Junior Power Timer Series Adhesive Mount 64mm L
Available Stock
4,377
Estimated Ship Time:6-13 working days
1+$6.7045
10+$5.456
1,000+$3.8664
2,000+$3.5748
- +
Ext. Price(USD):$20.11
MOQ:3
Mult:1
SPQ:1
10pin Shroud AMPMODU MTE Series
Available Stock
1,519
Estimated Ship Time:7-9 working days
16+
70+$1.65
200+$1.617
350+$1.584
700+$1.562
- +
Ext. Price(USD):$115.50
MOQ:70
Mult:1
SPQ:1
Hirose Locating Bushing, Bushing
Available Stock
1,607
Estimated Ship Time:6-13 working days
10+$0.7981
25+$0.713
5,000+$0.4838
10,000+$0.4741
- +
Ext. Price(USD):$14.36
MOQ:18
Mult:1
SPQ:1
TE Connectivity Terminal Locking Clip, Grace Inertia Series
Available Stock
4,444
Estimated Ship Time:6-13 working days
100+$0.0702
250+$0.061
5,400+$0.0454
10,800+$0.0421
- +
Ext. Price(USD):$14.04
MOQ:200
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot AT Series
Available Stock
867
Estimated Ship Time:6-13 working days
10+$0.8338
25+$0.7441
1,200+$0.4644
2,700+$0.4385
- +
Ext. Price(USD):$14.17
MOQ:17
Mult:1
SPQ:1
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
4,984
Estimated Ship Time:6-13 working days
25+$0.3703
100+$0.3245
5,000+$0.2484
10,000+$0.2452
- +
Ext. Price(USD):$14.07
MOQ:38
Mult:1
SPQ:1
Harwin
ECAD Model:
26-Pin Backshell Datamate L-Tek
Available Stock
289
Estimated Ship Time:9-14 working days
1+$5.6808
10+$4.8276
1,000+$3.4881
2,500+$3.2699
- +
Ext. Price(USD):$28.40
MOQ:5
Mult:1
SPQ:1
Boot 123.32mm (L)
Available Stock
256
Estimated Ship Time:6-13 working days
1+$10.6605
10+$8.789
500+$6.8904
1,000+$6.5664
- +
Ext. Price(USD):$21.32
MOQ:2
Mult:1
SPQ:1
Backshell MTC Series, 50.8mm L × 9.9mm H
Available Stock
87
Estimated Ship Time:5-12 working days
1+$466.939
5+$448.6724
23+$426.4913
30+$425.4213
- +
Ext. Price(USD):$466.93
MOQ:1
Mult:1
SPQ:10
Molex
ECAD Model:
Shroud, 20-Pin, C-Grid SL Series, Wire Mount
Available Stock
600
Estimated Ship Time:7-10 working days
21+
150+$1.507
300+$1.485
450+$1.441
- +
Ext. Price(USD):$226.05
MOQ:150
Mult:1
SPQ:1
Housing
Available Stock
29
Estimated Ship Time:9-14 working days
1+$6,857.244
10+$6,720.1013
100+$6,585.6988
500+$6,453.9849
1,000+$6,324.9052
- +
Ext. Price(USD):$6,857.24
MOQ:1
Mult:1
SPQ:1
Cap (Cover), Protective GPRB2 Series Plug, 34mm L × 9mm H
Available Stock
40
Estimated Ship Time:7-9 working days
17+
7+$17.314
22+$16.489
- +
Ext. Price(USD):$121.19
MOQ:7
Mult:1
SPQ:1
22-Pin Cap (Cover), Strain Relief MTA-156 Series Board Mount 87.17mm L × 11.18mm H
Available Stock
1,873
Estimated Ship Time:5-12 working days
125+$0.4613
500+$0.4199
10,000+$0.2654
15,000+$0.258
- +
Ext. Price(USD):$57.66
MOQ:125
Mult:125
SPQ:125
Amphenol
ECAD Model:
4pin Shroud Wire Mount 8.76mm L × 13mm H
Available Stock
7,261
Estimated Ship Time:6-13 working days
25+$0.4623
100+$0.4312
3,000+$0.3424
5,000+$0.3218
- +
Ext. Price(USD):$14.33
MOQ:31
Mult:1
SPQ:1
JST
ECAD Model:
8-Pin Retainer, XAF Series, Bracket Mount
Available Stock
919
Estimated Ship Time:9-14 working days
100+$0.2433
250+$0.2281
500+$0.2172
- +
Ext. Price(USD):$26.03
MOQ:107
Mult:1
SPQ:1
Universal I/O Pin Connector Stress Relief, Ribbon Cable Assembly, Glass-Filled Polyester, Lock Hook, 10-64 Pins
Available Stock
4,000
Estimated Ship Time:7-9 working days
24+
40+$3.014
95+$2.97
200+$2.915
400+$2.86
- +
Ext. Price(USD):$120.56
MOQ:40
Mult:1
SPQ:1
3pin Backshell
Available Stock
500
Estimated Ship Time:7-9 working days
13+
40+$3.025
95+$2.97
200+$2.915
400+$2.849
500+$2.794
- +
Ext. Price(USD):$121.00
MOQ:40
Mult:1
SPQ:1
TE Connectivity Automotive Connector Rear Cover, MCON Sealed Connector Series, Black
Available Stock
151
Estimated Ship Time:7-9 working days
19+
25+$4.873
60+$4.675
- +
Ext. Price(USD):$121.82
MOQ:25
Mult:1
SPQ:1
Amphenol Industrial PCB Housing, AIPXE Series, Thermoplastic, 82.55 × 101.6 × 19mm, 24-Pin
Available Stock
6
Estimated Ship Time:5-10 working days
1+$8.2723
13+$8.0811
25+$7.9154
- +
Ext. Price(USD):$8.27
MOQ:1
Mult:1
Connector Accessories Ring
Available Stock
10,532
Estimated Ship Time:7-9 working days
11+
200+$0.671
450+$0.66
850+$0.649
1,700+$0.638
8,000+$0.627
- +
Ext. Price(USD):$134.20
MOQ:200
Mult:1
SPQ:1
Available Stock
2,329
Estimated Ship Time:6-13 working days
10+$0.981
25+$0.8119
200+$0.7333
500+$0.6782
- +
Ext. Price(USD):$14.71
MOQ:15
Mult:1
SPQ:1
TE Connectivity Heavy Duty Connector Rear Cover, Power Versa-Lock 5.0 Series
Available Stock
24,125
Estimated Ship Time:6-13 working days
100+$0.0932
250+$0.0874
4,000+$0.0637
12,000+$0.0616
- +
Ext. Price(USD):$14.07
MOQ:151
Mult:1
SPQ:1
25 / PageGoto