Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
6pin Backshell AMPSEAL Connectors
Available Stock
53
Estimated Ship Time:9-14 working days
50+$27.9955
100+$27.4357
200+$26.887
500+$26.3493
1,000+$25.8223
- +
Ext. Price(USD):$1,399.77
MOQ:50
Mult:50
SPQ:1
Harwin
ECAD Model:
28-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
7
Estimated Ship Time:9-14 working days
1+$149.9796
10+$127.4897
25+$119.5154
50+$113.819
100+$108.3953
- +
Ext. Price(USD):$149.97
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
Strain Relief, 34-Pin, D89 Series
Available Stock
1,569
Estimated Ship Time:9-14 working days
25+$0.6495
50+$0.5139
1,000+$0.4158
2,500+$0.3897
- +
Ext. Price(USD):$26.20
MOQ:51
Mult:1
SPQ:1
TE Connectivity
ECAD Model:
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
4,445
Estimated Ship Time:6-13 working days
25+$0.4382
100+$0.3894
250+$0.3685
1,000+$0.3272
- +
Ext. Price(USD):$14.02
MOQ:32
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve, Receptacle, Plastic, For 1 Cable
Available Stock
710
Estimated Ship Time:5-10 working days
5+$1.8431
50+$1.787
125+$1.736
- +
Ext. Price(USD):$9.21
MOQ:5
Mult:5
TE Connectivity Power Versa-Lock 5.0 Series Heavy Duty Connector Terminal Position Guarantor, 600V DC
Available Stock
3,514
Estimated Ship Time:7-10 working days
10+
500+$0.2398
1,400+$0.2354
2,100+$0.2222
- +
Ext. Price(USD):$119.90
MOQ:500
Mult:1
SPQ:1
3M
ECAD Model:
16-Pin Strain Relief, 891 Series, 24.9mm L × 6.1mm W
Available Stock
2,170
Estimated Ship Time:6-13 working days
10+$0.6072
25+$0.5428
5,000+$0.3607
10,000+$0.3413
- +
Ext. Price(USD):$14.11
MOQ:26
Mult:1
SPQ:1
Gasket
Available Stock
9
Estimated Ship Time:7-9 working days
15+
8+$13.926
- +
Ext. Price(USD):$111.40
MOQ:8
Mult:1
SPQ:1
111-Pin Lever Multi-Lock Series
Available Stock
724
Estimated Ship Time:7-9 working days
09+
125+$0.88
400+$0.847
- +
Ext. Price(USD):$110.00
MOQ:125
Mult:1
SPQ:1
Radiall
ECAD Model:
SFP Assembly
Available Stock
324
Estimated Ship Time:6-13 working days
1+$4.554
10+$3.96
1,012+$2.3436
2,508+$2.1816
- +
Ext. Price(USD):$18.21
MOQ:4
Mult:1
SPQ:1
14-Pin Shroud AMPMODU MTE Series Panel Mount 53.87mm × 7.87mm H
Available Stock
755
Estimated Ship Time:7-9 working days
23+
55+$2.035
150+$1.771
25,000+$1.342
50,000+$1.243
- +
Ext. Price(USD):$111.92
MOQ:55
Mult:1
SPQ:1
3M
ECAD Model:
4pin Strain Relief 451 Series
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
5-Pin Cable Holder for Ribbon Cables, Wire Mount, 16.6mm × 6mm × 3.8mm
Available Stock
255,342
Estimated Ship Time:7-9 working days
19+
893+$0.0649
10,000+$0.0627
20,000+$0.0594
52,000+$0.0572
157,000+$0.0561
- +
Ext. Price(USD):$57.95
MOQ:893
Mult:1
SPQ:1
JAE
ECAD Model:
Retainer 109-Pin MX60A Series
Available Stock
245
Estimated Ship Time:9-14 working days
1+$3.0996
10+$2.6298
1,008+$1.8988
2,688+$1.7719
- +
Ext. Price(USD):$27.89
MOQ:9
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Backshell, MX150 Series
Available Stock
7,027
Estimated Ship Time:7-9 working days
21+
102+$1.155
300+$1.133
550+$1.122
1,100+$1.1
- +
Ext. Price(USD):$117.81
MOQ:102
Mult:1
SPQ:1
ITT Cannon 24-Pin D-Sub Housing, TSTRECT Series, ABS Body, Straight Lead
Available Stock
326
Estimated Ship Time:5-12 working days
5+$6.555
25+$4.807
1,000+$3.317
2,500+$3.103
- +
Ext. Price(USD):$32.77
MOQ:5
Mult:1
SPQ:1
1-Pin Cap (Cover), HVA 280 Series
Available Stock
500
Estimated Ship Time:7-10 working days
22+
148+$0.748
600+$0.748
1,200+$0.66
10,000+$0.627
20,000+$0.605
- +
Ext. Price(USD):$110.70
MOQ:148
Mult:1
SPQ:1
4-Pin Cap (Cap) 0600 SeriesHorn Type (Header) TH
Available Stock
270
Estimated Ship Time:9-14 working days
1+$3.9096
10+$3.3242
1,000+$2.4016
2,500+$2.2513
- +
Ext. Price(USD):$27.36
MOQ:7
Mult:1
SPQ:1
50-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
158
Estimated Ship Time:7-9 working days
21+
65+$1.76
- +
Ext. Price(USD):$114.40
MOQ:65
Mult:1
SPQ:1
10pin Strain Relief 15.2mm(Length)*4.2mm(height)
Available Stock
710
Estimated Ship Time:5-12 working days
340+$0.0897
2,550+$0.0756
100,130+$0.0613
150,110+$0.0612
- +
Ext. Price(USD):$30.49
MOQ:340
Mult:170
SPQ:170
EMI Backshell DMC-MD Inserts
Available Stock
5
Estimated Ship Time:7-9 working days
16+
1+$189.101
2+$185.845
3+$182.578
- +
Ext. Price(USD):$189.10
MOQ:1
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
29
Estimated Ship Time:9-14 working days
10+$176.8878
100+$173.3502
200+$169.8831
500+$166.4855
1,000+$163.1558
- +
Ext. Price(USD):$1,768.87
MOQ:10
Mult:10
SPQ:1
Molex
ECAD Model:
Connector 12-Pin Terminal Position Assurance (TPA) 51163 Series
Available Stock
27,750
Estimated Ship Time:7-9 working days
23+
569+$0.2057
1,500+$0.2013
7,200+$0.1903
16,000+$0.1672
- +
Ext. Price(USD):$117.04
MOQ:569
Mult:1
SPQ:1
Mounting Base, DMC-M Series
Available Stock
28
Estimated Ship Time:9-14 working days
5+$418.7916
10+$410.4162
50+$402.2082
100+$394.1639
500+$386.2807
- +
Ext. Price(USD):$2,093.95
MOQ:5
Mult:5
SPQ:1
ITT Cannon
ECAD Model:
4-Pin Wedgelock IT Series Connector
Available Stock
125,635
Estimated Ship Time:7-9 working days
22+
750+$0.1485
3,700+$0.143
7,400+$0.1364
36,800+$0.132
110,300+$0.1254
- +
Ext. Price(USD):$111.37
MOQ:750
Mult:1
SPQ:1
25 / PageGoto