Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Polarizing Device (Key, Plug, Post) Box Series, External Mount
Available Stock
962
Estimated Ship Time:9-14 working days
1+$9.558
10+$8.1227
500+$6.1634
1,000+$5.8695
- +
Ext. Price(USD):$28.67
MOQ:3
Mult:1
SPQ:1
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Available Stock
951
Estimated Ship Time:6-13 working days
1+$1.863
10+$1.495
2,500+$1.0055
5,000+$0.9817
- +
Ext. Price(USD):$14.90
MOQ:8
Mult:1
SPQ:1
Adam Tech
ECAD Model:
3-Pin Cap (Cap), MTD-B Series
Available Stock
1,979
Estimated Ship Time:9-14 working days
100+$0.1831
250+$0.1716
500+$0.1634
1,000+$0.1556
- +
Ext. Price(USD):$26.00
MOQ:142
Mult:1
SPQ:1
EMI Backshell DMC-MD Inserts
Available Stock
25
Estimated Ship Time:7-9 working days
16+
4+$27.533
10+$27.027
20+$26.521
- +
Ext. Price(USD):$110.13
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
32-Pin Shroud C-Grid SL Series Wire Mount 27.56mm H
Available Stock
5,229
Estimated Ship Time:7-9 working days
24+
51+$2.299
150+$2.255
1,200+$1.87
3,000+$1.804
- +
Ext. Price(USD):$117.24
MOQ:51
Mult:1
SPQ:1
Capacitor Cover, 9-Pin
Available Stock
3,400
Estimated Ship Time:7-9 working days
20+
80+$1.375
200+$1.342
1,000+$1.276
2,500+$1.199
- +
Ext. Price(USD):$110.00
MOQ:80
Mult:1
SPQ:1
6-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
2,519
Estimated Ship Time:7-9 working days
14+
1,613+$0.0682
13,500+$0.0682
27,000+$0.0605
50,000+$0.055
- +
Ext. Price(USD):$110.00
MOQ:1,613
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
ITT Cannon 6-Pin D-Sub Housing TSTRECT Series, Nylon, Black
Available Stock
189
Estimated Ship Time:6-13 working days
1+$4.9335
10+$4.004
1,000+$2.8404
2,500+$2.5704
- +
Ext. Price(USD):$14.80
MOQ:3
Mult:1
SPQ:1
3-Pin Clip Junior Power Timer Series Clamp Mount 28.6mm L
Available Stock
2,020
Estimated Ship Time:9-14 working days
50+$0.4072
100+$0.3876
250+$0.3633
500+$0.3459
1,000+$0.3294
- +
Ext. Price(USD):$26.06
MOQ:64
Mult:1
SPQ:1
NOVO AMP Latch, Ribbon Cable Connector Component, Glass Filled Nylon, 10-64 Pin Options
Available Stock
11,018
Estimated Ship Time:7-9 working days
19+
500+$0.2277
1,500+$0.2233
2,500+$0.2112
5,000+$0.1947
10,000+$0.1892
- +
Ext. Price(USD):$113.85
MOQ:500
Mult:250
SPQ:250
Mounting Base, DMC-MD Inserts
Available Stock
37
Estimated Ship Time:9-14 working days
2+$86.832
10+$82.4904
1,000+$67.1906
10,000+$63.8302
- +
Ext. Price(USD):$173.66
MOQ:2
Mult:2
SPQ:1
Cap (Cover), Dust, 18-Pin, MTA-156 Series, 71.32mm L × 11.18mm H
Available Stock
787
Estimated Ship Time:7-9 working days
20+
500+$0.385
1,000+$0.33
25,000+$0.2981
50,000+$0.2607
- +
Ext. Price(USD):$192.50
MOQ:500
Mult:1
SPQ:1
Molex
ECAD Model:
6pin Wedgelock ML-XT 93445 Housing, Edge Mount
Available Stock
6,990
Estimated Ship Time:7-9 working days
19+
544+$0.1078
6,000+$0.1023
- +
Ext. Price(USD):$58.64
MOQ:544
Mult:1
SPQ:1
1-Pin Cap (Cover), 9177-600 Series Contacts
Available Stock
1,300
Estimated Ship Time:6-13 working days
25+$0.4608
100+$0.3899
5,600+$0.2565
10,400+$0.2463
- +
Ext. Price(USD):$26.72
MOQ:58
Mult:1
SPQ:1
Molex
ECAD Model:
19-Pin Shroud C-Grid SL Series Wire Mount 64.61mm L × 8.12mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
18-pin Splash Guard SHS Series Receptacles
Available Stock
140
Estimated Ship Time:6-13 working days
1+$7.2335
10+$5.885
525+$4.3632
1,050+$4.0608
- +
Ext. Price(USD):$14.46
MOQ:2
Mult:1
SPQ:1
Cable Clamp, Bracket Mount, Wire Mount
Available Stock
84
Estimated Ship Time:6-13 working days
1+$5.336
10+$4.642
1,020+$2.916
2,520+$2.8404
- +
Ext. Price(USD):$16.00
MOQ:3
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
3,323
Estimated Ship Time:6-13 working days
1+$1.564
10+$1.3225
500+$0.6242
2,500+$0.6102
- +
Ext. Price(USD):$14.54
MOQ:11
Mult:1
SPQ:1
Cap Cover, Dust, 4-Pin
Available Stock
25
Estimated Ship Time:9-14 working days
1+$2.5272
100+$2.4732
500+$2.43
1,000+$2.376
5,000+$2.3328
- +
Ext. Price(USD):$27.79
MOQ:11
Mult:1
SPQ:1
Coding Key DMC-MD Inserts
Available Stock
563
Estimated Ship Time:7-9 working days
19+
20+$6.71
45+$6.6
85+$6.479
200+$6.369
- +
Ext. Price(USD):$134.20
MOQ:20
Mult:1
SPQ:1
Amphenol AIPX Series Automotive Connector, IP69K
Available Stock
540
Estimated Ship Time:6-13 working days
1+$6.5435
10+$5.665
540+$4.2336
1,080+$3.564
- +
Ext. Price(USD):$19.63
MOQ:3
Mult:1
SPQ:1
Amphenol
ECAD Model:
20-Pin Strain Relief, Quickie™ Series
Available Stock
8,938
Estimated Ship Time:7-9 working days
26+
394+$0.2794
6,498+$0.2794
12,996+$0.2475
- +
Ext. Price(USD):$110.08
MOQ:394
Mult:1
SPQ:1
Harwin
ECAD Model:
Polarizing Device (Key, Plug, Post) Datamate 7.7mm L × 1.48mm H
Available Stock
1,397
Estimated Ship Time:9-14 working days
50+$0.3346
100+$0.3186
1,000+$0.2708
3,000+$0.2506
- +
Ext. Price(USD):$26.09
MOQ:78
Mult:1
SPQ:1
TE Connectivity Heavy Duty Connector, Rear Seal, Power Versa-Lock 5.0 Series, 1 Contact
Available Stock
8,500
Estimated Ship Time:7-10 working days
22+
1,500+$0.1001
3,000+$0.099
5,500+$0.0968
- +
Ext. Price(USD):$150.15
MOQ:1,500
Mult:500
SPQ:500
2mm Receptacle Connector Strain Relief, Ribbon Cable, Glass-Filled Polyester, Latch, 14-50 Pins
Available Stock
1,235
Estimated Ship Time:7-9 working days
10+
250+$0.506
750+$0.495
- +
Ext. Price(USD):$126.50
MOQ:250
Mult:1
SPQ:1
25 / PageGoto